Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
APS | SY89306VMI TR OverviewSeveral packaging options are available for convenient transportation, including 8-VFDFN Exposed Pad, 8-MLF?.It has been packaged in Tape & Reel (TR) packages and is ready for power buffer.An easy-to-adjust universaal mout for easy adjustability.In terms of types, this is a typical Buffer, ReDriver.It works on 3V~5.5V voltage.Maintaining output quality requires cooperation between 1 channels.ECL input can be accommodated.For optimal performance, set the operating temperature to -40°C~85°C.You can also search with "SY89306" if you want to find more pin-to-pin solutions that meet your special needs.ECL capacitance for the input.It is a 48mA op amp buffer. SY89306VMI TR Features1 channels. SY89306VMI TR ApplicationsThere are a lot of Microchip Technology SY89306VMI TR Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN65LVDM22DRG4 OverviewSeveral packaging options are available for convenient transportation, including 16-SOIC (0.154, 3.90mm Width).Tape & Reel (TR) packages are ready for power buffer.It comes with a universal mout that allows for easy adaptation.As far as types are concerned, this is just a typical Buffer, Multiplexer.For this op amp buffer to function, it requires 3V~3.6V voltage.A total of 1 x 2:2 channels cooperate to ensure high-quality output.It is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.To find more pin-to-pin solutions for your special needs, try searching with the letter "65LVDM22" in the search box.An op amp buffer of the op amp buffer is equipped with 16 terminals.Its peak reflow temperature is NOT SPECIFIED when it is being reflowed.Powered by 3.3V voltage, the splitter can be used to accomplish a wide variety of demanding tasks.There are 16 pins on the Power buffer, which corresponds to the pinout of the Power buffer.The output is in LVDS.16 pins are present on the op amp buffers.A Surface Mount hole is available for mounting it on a PCB or another board.There is a voltage of 27mA which is used to power this power buffer.Using 2-Bits as the receiver, it transmits data.Normal supply current for the splitter is 27mA. SN65LVDM22DRG4 Features1 x 2:2 channels. 2-Bit receiver. SN65LVDM22DRG4 ApplicationsThere are a lot of Texas Instruments SN65LVDM22DRG4 Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN65LVP16DRFR OverviewThis power buffer comes in a convenient 8-WFDFN Exposed Pad package for convenient transportation.Power buffer ready in Tape & Reel (TR) packages.Surface Mount A universal mout for easy adaptation to a wide range of heads.When it comes to types, this is a typical Buffer, ReDriver.It works on 2.375V~3.6V voltage.Maintaining output quality requires cooperation between 1 channels.This facilitates PECL input.To avoid malfunctioning, the operating temperature should be set to -40°C~85°C.To get more pin-to-pin solutions for your special needs, try searching a higher letter such as "65LVP16" instead of "s".You can find 8 terminals of the op amp buffer.This splitter is supplied with 2.5V voltage, which allows it to perform a variety of demanding tasks.It is important to note that the pinout of the Power buffer starts from the 8 pins that it has.In the output, LVPECL is used.Pins on its 8 axis are present.A Surface Mount hole allows it to be mounted on a PCB or other board.Other Other Interface ICs like the power buffer play a important role in the industry.A voltage of 48mA is required to operate this power buffer.Repeters can be run with 2.5/3.3V power supplies.Aside from IT ALSO OPERATES AT 3.3 V SUPPLY, the repeter is also specialized in certain areas. SN65LVP16DRFR Features1 channels. A standard Other Interface ICs. IT ALSO OPERATES AT 3.3 V SUPPLY. SN65LVP16DRFR ApplicationsThere are a lot of Texas Instruments SN65LVP16DRFR Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN65LVP17DRFR OverviewThe power buffer package contains 8-WFDFN Exposed Pad for ease of transportation.It has been packaged in Tape & Reel (TR) packages and is ready for power buffer.A universal mounting system for easy adaptation.In terms of types, this is a typical Buffer, ReDriver.2.375V~3.6V voltage is used to power this op amp buffer.PECL inputs can be facilitated by it.As a precaution, it is recommended that you set the operating temperature to -40°C~85°C in order to avoid malfunctioning.To find pin-to-pin solutions that fit your specific requirements, try searching with the letter "65LVP17".The op amp buffer has 8 terminals.It is a splitter that can accomplish a wide range of demanding tasks with power supplied by 2.5V voltage.From the 8 pins on the Power buffer, we can see the pinout of the Power buffer.Depending on the input, it will output in LVPECL.With 8 pins, it is connected.This board has a Surface Mount hole for mounting on a PCB or other board.Other Other Interface ICs like the power buffer play a important role in the industry.This power buffer operates from a voltage of 48mA.Power supplies of type 2.5/3.3V are sufficient to run the repeters.Receiver 1 is implemented in this repeater signal.IT ALSO OPERATES AT 3.3 V SUPPLY works in certain areas, while repeter specializes in others. SN65LVP17DRFR FeaturesA standard Other Interface ICs. IT ALSO OPERATES AT 3.3 V SUPPLY. SN65LVP17DRFR ApplicationsThere are a lot of Texas Instruments SN65LVP17DRFR Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN65LVDS22DG4 OverviewA convenient transport package is provided in the power buffer of a 16-SOIC (0.154, 3.90mm Width).Currently, this power buffer is available for shipping in Tube packages.The Surface Mount universal mout has the advantage of being easily adaptable.A typical Buffer, Multiplexer is this.3V~3.6V voltage is used to power this op amp buffer.In order for the output quality to be maintained, 1 x 2:2 channels must work together.Hence, it facilitates the entry of LVDS into the system.To avoid malfunctioning, the operating temperature should be set to -40°C~85°C.There are more pin-to-pin solutions available for your special needs if you search with the letter "65LVDS22".The op amp buffer has 16 terminals.It reaches its peak reflow temperature at 260 degrees Celsius.It is capable of completing a wide range of tasks with the 3.3V voltage supplied.From the power buffer's 16 pins, we can determine its pinout.16 pins are present on the op amp buffers.For mounting on PCBs or other boards, it has a Surface Mount.Voltage 20mA is needed to operate this power buffer.For normal operation, 3.3V voltage is required.A nominal supply current of 20mA is required for normal use of the splitter.In this repeater signal, 2 receivers are implemented. SN65LVDS22DG4 Features1 x 2:2 channels. SN65LVDS22DG4 ApplicationsThere are a lot of Texas Instruments SN65LVDS22DG4 Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | DS15BR400TSQX/NOPB OverviewIn order to make transportation as convenient as possible, power buffer is packaged in 32-WFQFN Exposed Pad.The package is ready for power buffer in Tape & Reel (TR) pieces.A universal mount that's easy to adapt.Type-wise, this is a Buffer, ReDriver.In order to function, this op amp buffer requires 3V~3.6V voltage.It facilitates CML, LVDS, LVPECL input.The operating temperature should be set to -40°C~85°C to avoid mal-function.The operational amplifier buffer targets LVDS applications and others.For more pin-to-pin solutions, try "DS15BR400".On the op amp buffer, you will find 32 terminals.The peak reflow temperature of the power buffer is 260.As long as the splitter is supplied with 3.3V voltage, it can perform a wide range of demanding tasks.It is equipped with 32 pins.It has a Surface Mount for mouting on PCB or other boards.In the industry, other Line Driver or Receivers like the power buffer play an important role.215mA is the voltage that this power buffer operates on.It is necessary to supply voltage 3.3V for normal operation.Using 4-Bits as the receiver, it transmits data.This is a 4 element interface repeater signal. DS15BR400TSQX/NOPB FeaturesMainly used in LVDS. A standard Line Driver or Receivers. 4-Bit receiver. DS15BR400TSQX/NOPB ApplicationsThere are a lot of Texas Instruments DS15BR400TSQX/NOPB Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN75178BPSRE4 OverviewThe power buffer package contains 8-SOIC (0.209, 5.30mm Width) for ease of transportation.Power buffer is ready to ship in a package of Tape & Reel (TR).Surface Mount A universal mout for easy adaptation to a wide range of heads.Speaking of types, this is a typical Buffer, ReDriver.There is 4.75V~5.25V voltage used to power this op amp buffer. It works on 4.75V~5.25V voltage.It is recommended to set the operating temperature to 0°C~70°C to prevent malfunctions.The operational amplifier buffer targets RS422, RS485 applications and others.In order to find more pin-to-pin solutions that will fit your specific needs, try typing "SN75178" in the search box.As you can see in the picture, the op amp buffer has 8 terminals.During reflow, the peak temperature of the material is determined by the number NOT SPECIFIED.The splitter is supplied with 5V voltage, so it is capable of completing a wide range of demanding tasks.Taking the Power buffer's pinout as an example, it starts from the 8 pins it has on its surface.With 8 pins, it is connected.It has a Surface Mount for mouting on PCB or other boards.The power buffer plays an important role in the industry, along with other Line Driver or Receivers.A voltage of 70mA is required to operate this power buffer.During normal operation, 5V operating voltage is required.In order to run the repeters, two 5V power supplies are sufficient.A nominal supply current of 57mA is required for normal use of the splitter.1 receivers are implemented in this repeater signal.Aside from POSITIVE AND NEGATIVE CURRENT LIMITING 3-STATE OUTPUTS, the repeter is also specialized in certain areas. SN75178BPSRE4 FeaturesMainly used in RS422, RS485. A standard Line Driver or Receivers. POSITIVE AND NEGATIVE CURRENT LIMITING 3-STATE OUTPUTS. SN75178BPSRE4 ApplicationsThere are a lot of Texas Instruments SN75178BPSRE4 Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN65LVP17DRFRG4 OverviewThe power buffer package contains 8-WFDFN Exposed Pad for ease of transportation.The package is ready for power buffer in Tape & Reel (TR) pieces.The Surface Mount universal mout is designed for easy adaptability.When it comes to types, this is a typical Buffer, ReDriver.There is no voltage involved in the operation of this op amp buffer.This facilitates PECL input to the system.For optimal performance, set the operating temperature to -40°C~85°C.Get more pin-to-pin solutions by searching with "65LVP17".The op amp buffer has 8 terminals that you can find on the side.Reflow temperature is NOT SPECIFIED at its peak.Powered by a 2.5V voltage, the splitter is capable of performing many demanding tasks due to its dependable supply.It is important to note that the pinout of the Power buffer starts from the 8 pins that it has.The output is in the form of LVPECL.With 8 pins, it is connected.A Surface Mount hole is available for mounting it on a PCB or another board.The power buffer plays an important role in the industry, along with other Other Interface ICs.It operates at a voltage of 48mA.There are enough 2.5/3.3V power supplies to power the repeters.The repeater signal implements 1 receivers.Together with IT ALSO OPERATES AT 3.3 V SUPPLY, the repeter specializes in certain areas. SN65LVP17DRFRG4 FeaturesA standard Other Interface ICs. IT ALSO OPERATES AT 3.3 V SUPPLY. SN65LVP17DRFRG4 ApplicationsThere are a lot of Texas Instruments SN65LVP17DRFRG4 Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN65LVDS19DRFR OverviewPackaging is convenient because power buffer comes in 8-WFDFN Exposed Pad.Currently available in Tape & Reel (TR) packages for power buffer.An easy-to-adjust universal mout.Speaking of types, this is a typical Buffer, ReDriver.There is 2.375V~3.6V voltage used by this op amp buffer.A total of 1 channels cooperate together in order to ensure the quality of the output.As a result, PECL input is facilitated.If you want to avoid malfunction, set the operating temperature to -40°C~85°C.Try search with "65LVDS19" to get more pin-to-pin solutions for your special needs.There are 8 terminals on the op amp buffer that you can find.2.5V voltage provides the splitter with the power it needs to handle a wide range of demanding tasks.There are 8 pins on the Power buffer, which corresponds to the pinout of the Power buffer.LVDS is what it outputs as the output format.With 8 pins, it is connected.It has a Surface Mount for mouting on PCB or other boards.In the industry, Other Interface ICs's such as this power buffer have an important role to play.A voltage of 36mA is required to operate this power buffer.The repeters can run on a 2.5/3.3V power supply. SN65LVDS19DRFR Features1 channels. A standard Other Interface ICs. SN65LVDS19DRFR ApplicationsThere are a lot of Texas Instruments SN65LVDS19DRFR Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN65LVP19DRFRG4 OverviewFor convenience, power buffer comes packaged in 8-WFDFN Exposed Pad.Ready for shipping in Tape & Reel (TR) package.A universal mout that is easy to adapt.In terms of types, this is a typical Buffer, ReDriver.The op amp buffer uses a voltage of 2.375V~3.6V volts for its operation.It is important for 1 channels to work together in order to maintain the output quality at all times.PECL input is enabled.In order to prevent malfunctions, the operating temperature should be set to -40°C~85°C.You can get more pin-to-pin solutions for your specific needs by searching with "65LVP19".There are 8 terminals on the op amp buffer.As the splitter is supplied with a 2.5V voltage, it is able to perform a wide range of demanding tasks.There are 8 pins on the Power buffer, which corresponds to the pinout of the Power buffer.As far as output is concerned, it is in LVPECL.A mounting hole is provided for mounting on PCBs and other boards.In addition to the power buffer, other Other Interface ICs also play an important role.36mA is the voltage that this power buffer operates on.The repeters can be run using 2.5/3.3V power supplies. SN65LVP19DRFRG4 Features1 channels. A standard Other Interface ICs. SN65LVP19DRFRG4 ApplicationsThere are a lot of Texas Instruments SN65LVP19DRFRG4 Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN65LVDM22PWR OverviewAs a convenience to the user, power buffer has been packaged in 16-TSSOP (0.173, 4.40mm Width).Power buffer ready in Tape & Reel (TR) packages.The Surface Mount universal mout is designed for easy adaptability.As for types, this is an example of a typical Buffer, Multiplexer.To operate, this op amp buffer needs 3V~3.6V voltage.The output quality is maintained by 1 x 2:2 channels.Setting the operating temperature to -40°C~85°C will prevent malfunctions.In order to find more pin-to-pin solutions that meet your special needs, you can search with "65LVDM22".On the op amp buffer, you will find 16 terminals.In terms of its peak reflow temperature, it is NOT SPECIFIED.The splitter is supplied with 3.3V voltage, so it is capable of completing a wide range of demanding tasks.Power buffer pinouts start from 16 pins.As far as output is concerned, it is in LVDS.There are 16 pins on it.The Surface Mount on the board allows it to be mounted on PCBs or other boards.In order for this power buffer to operate, a voltage of 27mA must be applied.2-Bit receiver is used.A nominal supply current of 27mA is recommended for normal operation of the splitter. SN65LVDM22PWR Features1 x 2:2 channels. 2-Bit receiver. SN65LVDM22PWR ApplicationsThere are a lot of Texas Instruments SN65LVDM22PWR Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | DS25BR150TSDX/NOPB OverviewPower buffer is packaged in 8-WFDFN Exposed Pad for convenient transportation.In Tape & Reel (TR) packages, power buffer is ready to be shipped out.Adaptable universalism in a single mout.This is one of the most common type of Buffer, ReDriver that can be found.In order to function, this op amp buffer requires 3V~3.6V voltage.As a result, it facilitates CML, LVDS, LVPECL input.A -40°C~85°C should be set as the operating temperature in order to avoid malfunctions.It is designed for use by LVDS as well as other applications.Get more pin-to-pin solutions by searching with "DS25BR150".You can find 8 terminals of the op amp buffer.Temperature 260 is its peak reflow temperature.The splitter works with a voltage of 3.3V, so it can be used for various demanding tasks.There are 8 pins on the Power buffer, which corresponds to the pinout of the Power buffer.The op amp buffers have 8 pins.The Surface Mount on the board allows it to be mounted on PCBs or other boards.Other Line Driver or Receivers like the power buffer play a important role in the industry.43mA is the voltage that this power buffer operates on.Operating voltage 3.3V is required for normal operation.There is a maximum dissipation of 2.08W of power from this splitter.There are 1 receivers implemented in this repeater signal. DS25BR150TSDX/NOPB FeaturesMainly used in LVDS. A standard Line Driver or Receivers. DS25BR150TSDX/NOPB ApplicationsThere are a lot of Texas Instruments DS25BR150TSDX/NOPB Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
APS | SY89306VMG-TR OverviewFor convenience, power buffer comes packaged in 8-VFDFN Exposed Pad, 8-MLF?.Packaged in Tape & Reel (TR) ready for power buffer.An easy-to-adapt universal mount.As far as types go, this is a typical Buffer, ReDriver.There is 3V~5.5V voltage used by this op amp buffer.As a result, 1 channels work together to maintain the quality of output.There is ECL input facilitation.For the operational amplifier buffer to function properly, the operating temperature should be set to -40°C~85°C.To find pin-to-pin solutions that fit your specific requirements, try searching with the letter "SY89306".An op amp buffer of the op amp buffer is equipped with 8 terminals.Reflow temperature is 260 at its peak.With its 3.3V voltage supply, the splitter can perform many demanding functions that are expected from it.The 8 pins are on it.It has a Surface Mount for mouting on PCB or other boards.It operates at a voltage of 48mA.The repeter utilizes a 1-Bit receiver.It comes from Precision Edge?.Splitters should have a nominal supply current of 48mA for normal operation.In addition to ALSO OPERATES AT 5V SUPPLY AND VEE =-3.3, VCC=0, the repeter has specialties in certain areas. SY89306VMG-TR Features1 channels. 1-Bit receiver. ALSO OPERATES AT 5V SUPPLY AND VEE =-3.3, VCC=0. SY89306VMG-TR ApplicationsThere are a lot of Microchip Technology SY89306VMG-TR Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | DS25BR100TSDX/NOPB OverviewThere is a package of 8-WFDFN Exposed Pad for easy transportation of this power buffer.Tape & Reel (TR) packages are ready for power buffer.The Surface Mount universal mout is designed for easy adaptability.In terms of types, this is a typical Buffer, ReDriver.For the purpose of working, this op amp buffer requires 3V~3.6V voltage.As a result, CML, LVDS, LVPECL input is facilitated.It is recommended that the operating temperature be set to -40°C~85°C in order to prevent any malfunctions.In addition to applications for LVDS, this operational amplifier buffer is also intended for other applications.Using "DS25BR100" will give you more solutions for your unique needs.As you can see in the picture, the op amp buffer has 8 terminals.It reaches its peak reflow temperature at 260 degrees Celsius.With its 3.3V voltage supply, the splitter can perform many demanding functions that are expected from it.There is a pinout for the Power buffer starting from the 8 pins that it has.The 8 pins are on it.For mounting on PCBs or other boards, there is a Surface Mount.A power buffer like the power buffer plays a crucial role in the industry.35mA is the voltage that this power buffer operates on.The voltage required for normal operation is 3.3V.It dissipates 2.08W of power at most.A 1 element interface repeater signal is what we are dealing with here. DS25BR100TSDX/NOPB FeaturesMainly used in LVDS. A standard Line Driver or Receivers. DS25BR100TSDX/NOPB ApplicationsThere are a lot of Texas Instruments DS25BR100TSDX/NOPB Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | DS42MB100TSQE/NOPB OverviewDesigned for convenient transportation, power buffer comes packaged in a 36-WFQFN Exposed Pad.There are Tape & Reel (TR) packages available for this power buffer, which means it is ready for shipping.It comes with a universal mout that allows for easy adaptation.It is important to note that this is a typical Buffer, Multiplexer type.To operate this op amp buffer, it requires a voltage of 3.135V~3.465V volts.It is important for 1 x 1:2, 2:1 channels to work together to ensure quality output.Input is facilitated by CML.It is recommended to set the operating temperature to -40°C~85°C to avoid any malfunctions.To find pin-to-pin solutions that fit your specific requirements, try searching with the letter "DS42MB100".The peak reflow temperature of the power buffer is 260.36 pins are included in it. DS42MB100TSQE/NOPB Features1 x 1:2, 2:1 channels. DS42MB100TSQE/NOPB ApplicationsThere are a lot of Texas Instruments DS42MB100TSQE/NOPB Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | PCA9515AP OverviewFor convenience, power buffer comes packaged in 8-DIP (0.300, 7.62mm).It has been packaged into Tube packages, so power buffer is ready to be shipped.An easy-to-adjust universaal mout for easy adjustability.Here's a typical Buffer, ReDriver.In order to function, this op amp buffer requires 2.3V~3.6V voltage.It is important that the 1 channels cooperate in order to maintain a high level of output.Input is facilitated by 2-Wire Bus.It is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.It is aimed at applications related to the I2C and other areas.In order to find more pin-to-pin solutions that will fit your specific needs, try typing "CA9515" in the search box.8 terminals are located on the op amp buffer.It is capable of completing a wide range of tasks with the 3V voltage supplied.It starts with the 8 pins of the Power buffer in order to determine the pinout of the Power buffer.The output is in 2-Wire Bus.There are 8 pins on it.A Through Hole hole is available for mounting it on a PCB or another board.Other Line Driver or Receivers like the power buffer play a important role in the industry.500μA is the voltage that this power buffer operates on.It supports 2 outputs in total. PCA9515AP Features1 channels. Mainly used in I2C. A standard Line Driver or Receivers. 2 outputs. PCA9515AP ApplicationsThere are a lot of Texas Instruments PCA9515AP Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN65LVDS16DRFR OverviewPower buffer is packaged in 8-WFDFN Exposed Pad for convenient transportation.Packaged in Tape & Reel (TR) ready for power buffer.Easily adaptable Surface Mount universal mouthpiece.On the topic of types, I would like to point out that this is a typical Buffer, ReDriver.For its operation, this op amp buffer uses a voltage of 2.375V~3.6V.There is PECL input facilitation.It is recommended that the operating temperature be set to -40°C~85°C in order to prevent any malfunctions.To get more pin-to-pin solutions for your special needs, try searching a higher letter such as "65LVDS16" instead of "s".There are 8 terminals on the op amp buffer.There is a peak reflow temperature for this alloy of 260 degrees Celsius.The splitter is able to perform many demanding tasks when provided with 2.5V voltage.The pinout of the power buffer starts from 8 pins it has.LVDS is what it outputs as the output format.8 pins are present on the op amp buffers.It is mounted on PCBs or other boards using a Surface Mount.Other Other Interface ICs like the power buffer play a important role in the industry.Using 48mA as a voltage, this power buffer operates.2.5/3.3V power supplies are enough to run the repeters.The repeater signal implements 1 receivers.Aside from IT ALSO OPERATES AT 3.3 V SUPPLY, the repeter is also specialized in certain areas. SN65LVDS16DRFR FeaturesA standard Other Interface ICs. IT ALSO OPERATES AT 3.3 V SUPPLY. SN65LVDS16DRFR ApplicationsThere are a lot of Texas Instruments SN65LVDS16DRFR Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN65LVDS117DGGRG4 OverviewThis power buffer comes packaged in 64-TFSOP (0.240, 6.10mm Width) so that it can be transported easily.Packaged in Tape & Reel (TR) and ready for power buffer.A universal mout that is easy to adapt.As a matter of fact, this type is typical of the Buffer, Multiplexer type.As a result, the op amp buffer is powered by 3V~3.6V voltage.A total of 1 x 2:16 channels cooperate to ensure high-quality output.LVDS input is enabled.To make sure that the cooling system does not malfunction, you should set the operating temperature to -40°C~85°C.You can get more pin-to-pin solutions for your specific needs by searching with "65LVDS117".There are two 64 terminals on the op amp buffer and you can find them at the end of the op amp buffer.The peak reflow temperature of the material is 260.It is a splitter that can accomplish a wide range of demanding tasks with power supplied by 3.3V voltage.Power buffer pinout starts at 64 pins.It is equipped with 64 pins.This board has a Surface Mount hole for mounting on a PCB or other board.In the industry, Line Driver or Receivers's such as this power buffer have an important role to play.122mA is the voltage at which this power buffer operates.It is necessary to supply voltage 3.3V for normal operation.There is a 2-Bit receiver used in it.Power dissipation is 2.094W at most for this splitter.A 2 element interface repeater signal is shown here.The video signal spliter is equipped with 16 drivers. SN65LVDS117DGGRG4 Features1 x 2:16 channels. A standard Line Driver or Receivers. 2-Bit receiver. SN65LVDS117DGGRG4 ApplicationsThere are a lot of Texas Instruments SN65LVDS117DGGRG4 Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN65LVDM22PWRG4 OverviewFor ease of transportation, the power buffer is packaged in 16-TSSOP (0.173, 4.40mm Width).Ready for shipping in Tape & Reel (TR) package.Surface Mount Universal mout to make it easier for you to adjust.In terms of types, this is a typical Buffer, Multiplexer.This op amp buffer uses 3V~3.6V voltage for work.As a result, 1 x 2:2 channels collaborate to maintain output quality.As a precaution, it is recommended that you set the operating temperature to -40°C~85°C in order to avoid malfunctioning.It is possible to search with "65LVDM22" to get more pin-to-pin solutions for your special requirements if you are looking for some.On the op amp buffer, you can find 16 terminals.Reflow temperature at its peak is calculated to be NOT SPECIFIED.Supplied by 3.3V voltage, the splitter can accomplish the many demanding tasks.Pinouts of a power buffer start from the 16 pins.In LVDS, it produces output.With 16 pins, it is connected.It is mounted on PCBs or other boards using a Surface Mount.This power buffer operates from a voltage of 27mA.2-Bit receiver is used.Normally, 27mA is the supply current for this splitter. SN65LVDM22PWRG4 Features1 x 2:2 channels. 2-Bit receiver. SN65LVDM22PWRG4 ApplicationsThere are a lot of Texas Instruments SN65LVDM22PWRG4 Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN75178BPSR OverviewAs a convenience to the user, power buffer has been packaged in 8-SOIC (0.209, 5.30mm Width).The package is ready for power buffer in Tape & Reel (TR) pieces.Surface Mount Universal mout for easy adaptation.As for types, this is an example of a typical Buffer, ReDriver.For its operation, this op amp buffer uses a voltage of 4.75V~5.25V.There should be a setting of 0°C~70°C for the operating temperature in order to avoid any malfunctions.The operational amplifier buffer is targeted at applications such as RS422, RS485 and others.Search with "SN75178" to get more pin-to-pin solutions.The op amp buffer has 8 terminals that can be found along its length.The peak reflow temperature of the power buffer is NOT SPECIFIED.Due to the 5V voltage supply, this splitter can handle a multitude of demanding tasks.A Power buffer's pinout is determined by the number of pins that it has and starts with 8.There are 8 pins on it.In addition to the Surface Mount axis, it has a female hole for mounting to PCBs or other boards.In addition to the power buffer, other Line Driver or Receivers also play an important role.In order for this power buffer to operate, a voltage of 70mA must be applied.For normal operation, 5V voltage is required.The repeters can be powered by 5V power supplies.A nominal supply current of 57mA is required for normal use of the splitter.The repeater signal implements 1 receivers.POSITIVE AND NEGATIVE CURRENT LIMITING 3-STATE OUTPUTS works in certain areas, while repeter specializes in others. SN75178BPSR FeaturesMainly used in RS422, RS485. A standard Line Driver or Receivers. POSITIVE AND NEGATIVE CURRENT LIMITING 3-STATE OUTPUTS. SN75178BPSR ApplicationsThere are a lot of Texas Instruments SN75178BPSR Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | DS25BR204TSQX/NOPB OverviewPower buffer is packaged in 40-WFQFN Exposed Pad for convenient transportation.Packaged in Tape & Reel (TR) ready for power buffer.An easy-to-adjust universaal mout for easy adjustability.As for types, this is an example of a typical Buffer, Multiplexer.To operate this op amp buffer, it requires a voltage of 3V~3.6V volts.A total of 1 x 2:4 channels cooperate to ensure high-quality output.As a result of this, there is no input facilitation.For optimal performance, set the operating temperature to -40°C~85°C.It is aimed at applications related to the LVDS and other areas.For more pin-to-pin solutions, try "DS25BR204".You can find 40 terminals of the op amp buffer.Reflow temperature is 260 at its peak.Powered by a 3.3V voltage, the splitter is capable of performing many demanding tasks due to its dependable supply.40 pins are included in it.It is mounted on PCBs or other boards using a Surface Mount.The power buffer and other Line Driver or Receivers play an important role in the industry.Using 185mA as a voltage, this power buffer operates.During normal operation, 3.3V operating voltage is required.In the most extreme case, this splitter dissipates 4.65W watts.It implements a 1 receiver.Video signal spliters include 4 drivers. DS25BR204TSQX/NOPB Features1 x 2:4 channels. Mainly used in LVDS. A standard Line Driver or Receivers. DS25BR204TSQX/NOPB ApplicationsThere are a lot of Texas Instruments DS25BR204TSQX/NOPB Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN65LVDT100DG4 OverviewA convenient transportation package of power buffer is provided in SOIC.It has been packaged in Rail/Tube packages and is ready for power buffer.On the op amp buffer, you will find 8 terminals.In terms of its peak reflow temperature, it is 260.When powered by 3.3V voltage, this splitter is capable of carrying out a number of demanding tasks.There is a pinout for the Power buffer starting from the 8 pins that it has.8 pins are present on the op amp buffers.For mounting on PCBs or other boards, it has a Surface Mount.In the industry, Line Driver or Receivers's such as this power buffer have an important role to play.30mA is the voltage at which this power buffer operates.The operating supply voltage of 3.3V is required for normal operation.1-Bit receiver is used.Normal supply current for the splitter is 30mA.The repeater signal is an interface with a 1 element.There is no need for it to be at a temperature lower than -40°C.It is not recommended to use a temperature higher than 85°C. SN65LVDT100DG4 FeaturesA standard Line Driver or Receivers. 1-Bit receiver. SN65LVDT100DG4 ApplicationsThere are a lot of Texas Instruments SN65LVDT100DG4 Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN65LVDT101DRG4 OverviewThere is a package of SOIC for easy transportation of this power buffer.Packaged in Tape and Reel ready for power buffer.The op amp buffer has 8 terminals that you can find on the side.Temperature 260 is its peak reflow temperature.The splitter is supplied with 3.3V voltage, so it is capable of completing a wide range of demanding tasks.It starts with the 8 pins of the Power buffer in order to determine the pinout of the Power buffer.The 8 pins are on it.A Surface Mount hole is available for mounting it on a PCB or another board.In the industry, other Line Driver or Receiverss play an important role, such as the power buffer.There is a voltage of 61mA which is used to power this power buffer.For normal operation, 3.3V voltage is required.Using a 1-Bit receiver, it transmits and receives data.A 1 element interface repeater signal such as this is used.It does not work well at temperatures below -40°C.Higher temperatures than 85°C are not recommended. SN65LVDT101DRG4 FeaturesA standard Line Driver or Receivers. 1-Bit receiver. SN65LVDT101DRG4 ApplicationsThere are a lot of Texas Instruments SN65LVDT101DRG4 Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN65LVDS22PWG4 OverviewAs a convenience to the user, power buffer has been packaged in TSSOP.There are Rail/Tube packages available for this power buffer, which means it is ready for shipping.16 terminals are located on the op amp buffer.The peak reflow temperature is 260.As long as the splitter is supplied with 3.3V voltage, it can perform a wide range of demanding tasks.Power buffer pinouts start from 16 pins.In addition, it has 16 pins.A mounting hole is provided for mounting on PCBs and other boards.There is a voltage of 20mA which is used to power this power buffer.For normal operation, 3.3V voltage is required.The repeter utilizes a 2-Bit receiver.Normally, 20mA is the supply current for this splitter.The repeater signal is an interface with a 2 element.In order for the spliter to function properly, temperatures below -40°C should not be used.Temperatures above 85°C should not be exceeded. SN65LVDS22PWG4 Features2-Bit receiver. SN65LVDS22PWG4 ApplicationsThere are a lot of Texas Instruments SN65LVDS22PWG4 Signal Buffers, Repeaters, Splitters applications.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors |
5164
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.