Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Texas Instruments | UCC2813DTR-4G4 OverviewThis ac to dc converter is embedded in package 8-SOIC (0.154, 3.90mm Width) .You can get it in AC/DC power converter Tape & Reel (TR) .A AC/DC converter of this type is mounted in the way of Surface Mount .It is necessary to operate the ac dc converter at a temperature of -55°C~150°C TJ °C in order for it to perform properly.This AC DC converter employs SWITCHING CONTROLLER analog IC type.Within the range of 8.3V~12V supply voltage (Vcc/Vdd), it can be used.In total, there are 8 terminations.On this ac/dc converter, there are 8 pins.Up to 8 pins are present on the ac-dc converter.It are possible to mount thare ac dc converters by Surface Mount .If you select the UCC2813 family, you will be able to search similar acdc converters.There are 1 outputs to be processed.The ac to dc conversions are included in Switching Regulator or Controllers .The output current is set to 200mA .There is 1V output voltage from this AC/DC converter.This power AC DC is capable of reaching high efficiency when operating at a frequency of 1MHz .It is possible to read the REACH SVHC standard at: No SVHC .Ensure that this AC to DC converter is always set to 10V . UCC2813DTR-4G4 FeaturesPackaged with 8-SOIC (0.154, 3.90mm Width) With 8 pins Output Current at 200mA UCC2813DTR-4G4 ApplicationsThere are a lot of Texas Instruments UCC2813DTR-4G4 AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Infineon Technologies | ICE3B0565XKLA1 OverviewThere is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm) .In Tube AC/DC power converter, it is available.It is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.When the switching frequency reaches 67kHz , the circuit is closed.The AC/DC converter is capable of being used when the supply voltage is 8.5V~21V (Vcc/Vdd).There have been 8 terminations of this program.On this ac/dc converter, there are 8 pins.There are 8 pins in the ac-dc converter.Through Hole are the recommended mounting method for the ac dc converters.This AC to DC converter belongs to the CoolMOS?, CoolSET?F3 family of manufacturers.The ICE3B0565 family can be used to search for similar acdc converters.There are 1 outputs to run.There is 500mA output current set.As a result, its output voltage is 650V .During a 21V -voltage supply, the interface IC conducts. ICE3B0565XKLA1 FeaturesPackaged with 8-DIP (0.300, 7.62mm) Switching Frequency at 67kHz With 8 pins Output Current at 500mA Operating Supply Voltage at the range of 21V ICE3B0565XKLA1 ApplicationsThere are a lot of Infineon Technologies ICE3B0565XKLA1 AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC3813DTR-2 Overview8-SOIC (0.154, 3.90mm Width) is the package in which the ac to dc converter is embedded.The AC/DC power converter type is Tape & Reel (TR) .A AC/DC converter of this type is mounted in the way of Surface Mount .The ac dc converter should be operated at a temperature of -55°C~150°C TJ °C to deliver its optimal performance.This AC DC converter employs SWITCHING CONTROLLER analog IC type.As long as the supply voltage (Vcc/Vdd) is within the range of 8.3V~12V , the AC/DC converter may be used.In total, there are 8 terminations.On this ac/dc converter, there are 8 pins.Up to 8 pins are present on the ac-dc converter.It is suitable for mounting by Surface Mount .It is possible to search for similar acdc converters by using the UCC3813 family.There are 1 outputs to run.There are a ac to dc conversions included in Switching Regulator or Controllers .AC to DC converter is set to 200mA for the output current.The output voltage of the AC/DC converter is 1V .AC to DC converter is able to reach high efficiency when its frequency is 1MHz .This AC to DC converter should always be set to 10V . UCC3813DTR-2 FeaturesPackaged with 8-SOIC (0.154, 3.90mm Width) With 8 pins Output Current at 200mA UCC3813DTR-2 ApplicationsThere are a lot of Texas Instruments UCC3813DTR-2 AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | MIC3838YMM OverviewAn embedded ac to dc converter is included in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package.In Tube AC/DC power converter, it is available.A AC/DC converter of this type is mounted in the way of Surface Mount .The ac dc converter should be operated at a temperature of -40°C~85°C TA °C to deliver its optimal performance.Up to 1MHz is the switching frequency.The voltage range of the supply can be set to 8.3V~15V (Vcc/Vdd).The ac/dc converter has 10 pins.The ac dc converters are suitable to mount by Surface Mount .The MIC3838 family allows you to search for similar acdc converters.A total of 2 outputs need to be run.We are setting the output current to 20mA .Its output voltage is3V .As AC to DC power converter of the package, 10-MSOP is provided.AC to DC converter can handle a maximum supply current of 20mA .Keeping the 85°C value at its maximum ensures the AC to DC power converter runs smoothly.Temperatures below -40°C are not permitted for this isolated switch.It is configured with Adjustable as the output. MIC3838YMM FeaturesPackaged with 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Switching Frequency at Up to 1MHz With 10 pins Output Current at 20mA Output Type : Adjustable MIC3838YMM ApplicationsThere are a lot of Microchip Technology MIC3838YMM AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC3804PWTR OverviewIt is embedded in package 8-TSSOP (0.173, 4.40mm Width) .There is a AC/DC power converter of Tape & Reel (TR) available.There is a mounting point for this AC/DC converter in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~85°C TA °C.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.As a result, the switching frequency reaches Up to 1MHz .As long as the supply voltage (Vcc/Vdd) is within the range of 8.3V~12V , the AC/DC converter may be used.As a result, it has a total of 8 terminations.The ac/dc converter has a total of 8 pins.A total of 8 pins are present on the ac-dc converter.Suitable mounting is provided by Surface Mount .Search similar acdc converters based on UCC3804 family members.The number of outputs to run is 1 .The following ac to dc conversions are contained in Switching Regulator or Controllers .We have set the output current to 1A .There is 1V voltage output from it.The power AC DC is capable of high efficiency when operated at a frequency of 1MHz .You should always set this AC to DC converter to 10V . UCC3804PWTR FeaturesPackaged with 8-TSSOP (0.173, 4.40mm Width) Switching Frequency at Up to 1MHz With 8 pins Output Current at 1A UCC3804PWTR ApplicationsThere are a lot of Texas Instruments UCC3804PWTR AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC2804DTRG4 OverviewThere is a ac to dc converter embedded in package 8-SOIC (0.154, 3.90mm Width) .Tape & Reel (TR) case is available for the ac dc converter.A AC/DC converter of this type is mounted in the way of Surface Mount .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~85°C TA .An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.When the switching frequency reaches Up to 1MHz , the circuit is closed.This AC/DC converter is designed for use within the range of 8.3V~12V supply voltage (Vcc/Vdd).Total terminations are 8 .The ac/dc converter has 8 pins.There are 8 pins in total.Suitable mounting is provided by Surface Mount .You can search similar acdc converters based on UCC2804 family.The number of outputs to run is 1 .AC to DC converter is included in Switching Regulator or Controllers .Current output is set to 1A .The output voltage of the AC/DC converter is 1V .This power AC DC is capable of reaching high efficiencies when operating at a frequency of 1MHz .In all situations, this AC to DC converter should be set to 10V . UCC2804DTRG4 FeaturesPackaged with 8-SOIC (0.154, 3.90mm Width) Switching Frequency at Up to 1MHz With 8 pins Output Current at 1A UCC2804DTRG4 ApplicationsThere are a lot of Texas Instruments UCC2804DTRG4 AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC2808AQDR-1G4Q1 Overview8-SOIC (0.154, 3.90mm Width) is the package in which the ac to dc converter is embedded.There is a AC/DC power converter of Tape & Reel (TR) available.In this case, the AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -55°C~150°C TJ °C.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.As long as the supply voltage (Vcc/Vdd) is within the range of 8.3V~15V , the AC/DC converter may be used.There have been 8 terminations of this program.There are 8 pins on the ac/dc converter.Up to 8 pins are present on the ac-dc converter.A member of the Automotive, AEC-Q100 manufacturer family, it has the following characteristics.A similar acdc converter can be searched by using the UCC2808 family.AC to DC converter is necessary to run 2 outputs.The ac to dc conversions can be found in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 1A .The input voltage with the maximal value of 15V can be ensured on the basis of unique technique.The maximum frequency of it is 1MHz . UCC2808AQDR-1G4Q1 FeaturesPackaged with 8-SOIC (0.154, 3.90mm Width) With 8 pins Output Current at 1A UCC2808AQDR-1G4Q1 ApplicationsThere are a lot of Texas Instruments UCC2808AQDR-1G4Q1 AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Infineon Technologies | ICE3A0565ZXKLA1 OverviewThe ac to dc converter is embedded in 8-DIP (0.300, 7.62mm), 7 Leads package.Tube case is available for the ac dc converter.The AC/DC converter is mounted in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -25°C~130°C TJ °C.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.The switching frequency reaches 100kHz .Vcc/Vdd can be used within the range of 8.5V~21V supply voltage.There are a total of 7 terminations.On this ac/dc converter, there are 7 pins.In this ac-dc converter, there are 7 pins.The ac dc converters is suitable for mounting by Through Hole .A member of the CoolMOS?, CoolSET?F3 manufacturer family, it has the following characteristics.Based on the ICE3A0565 family, you can search for similar acdc converters.As a result, its output voltage is 650V .It is possible for the interface IC to conduct when the supply voltage is 21V . ICE3A0565ZXKLA1 FeaturesPackaged with 8-DIP (0.300, 7.62mm), 7 Leads Switching Frequency at 100kHz With 7 pins Operating Supply Voltage at the range of 21V ICE3A0565ZXKLA1 ApplicationsThere are a lot of Infineon Technologies ICE3A0565ZXKLA1 AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | MIC38C44YM-TR OverviewThis ac to dc converter is embedded in package 8-SOIC (0.154, 3.90mm Width) .In Tape & Reel (TR) AC/DC power converter, it is available.In this case, the AC/DC converter is mounted in the way of Surface Mount .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.When the switching frequency reaches 500kHz , the process is complete.As long as the supply voltage (Vcc/Vdd) is within the range of 9V~20V , the AC/DC converter may be used.On the ac/dc converter, there are 8 pins.The ac dc converters are suitable for mounting by Surface Mount .Based on the MIC38C44 family, you can search for similar acdc converters.There are 1 outputs to be run.In this AC to DC transformer, the output current is set to 500A .There is 8-SOIC package provided with it.When the maximum 150°C is set, the AC to DC power converter runs steadily.A minimum working temperature of -40°C must be maintained for this isolated switch.500kHz is the maximum frequency. MIC38C44YM-TR FeaturesPackaged with 8-SOIC (0.154, 3.90mm Width) Switching Frequency at 500kHz With 8 pins Output Current at 500A MIC38C44YM-TR ApplicationsThere are a lot of Microchip Technology MIC38C44YM-TR AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | MIC38C42AYM-TR OverviewThis ac to dc converter is embedded in package 8-SOIC (0.154, 3.90mm Width) .You can get it in AC/DC power converter Tape & Reel (TR) .There is a AC/DC converter mounted in the way of Surface Mount .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.At this point, the switching frequency reaches 500kHz .This AC/DC converter is suitable for operation in the range of 9V~20V supply voltage (Vcc/Vdd).It contains 8 pins.Surface Mount is the recommended mounting method for the ac dc converters.Similar acdc converters can be found using the MIC38C42 family.There are 1 outputs to be processed.There is 500A output current set.The package contains 8-SOIC AC/DC converters.The maximum 150°C ensures that the AC to DC power converter runs stablily.A minimum working temperature of -40°C must be maintained by this isolated switch.Its max frequency is 500kHz . MIC38C42AYM-TR FeaturesPackaged with 8-SOIC (0.154, 3.90mm Width) Switching Frequency at 500kHz With 8 pins Output Current at 500A MIC38C42AYM-TR ApplicationsThere are a lot of Microchip Technology MIC38C42AYM-TR AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | MIC38C44AYM-TR OverviewIt is embedded in package 8-SOIC (0.154, 3.90mm Width) .The AC/DC power converter Tape & Reel (TR) is available for this product.Surface Mount is mounted in the way of this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.At this point, the switching frequency reaches 500kHz .A range of 9V~20V supply voltages (Vcc/Vdd) can be used.It contains 8 pins.Suitable mounting is provided by Surface Mount .You can search similar acdc converters based on MIC38C44 family.Running 1 outputs is available.500A is set as the output current.It is provided with 8-SOIC pacakge.Using 150°C as the maximum ensures that the AC to DC power converter operates in a stable manner.Temperatures below [-40°C are not allowed to be used on this isolated switch.Currently, there are 1 channels available.There is 500kHz maximum frequency for it. MIC38C44AYM-TR FeaturesPackaged with 8-SOIC (0.154, 3.90mm Width) Switching Frequency at 500kHz With 8 pins Output Current at 500A With 1 channels on it MIC38C44AYM-TR ApplicationsThere are a lot of Microchip Technology MIC38C44AYM-TR AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC2894DRG4 OverviewThere is a ac to dc converter embedded in package 16-SOIC (0.154, 3.90mm Width) .You can get it in AC/DC power converter Tape & Reel (TR) .In this case, the AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~105°C TJ °C.In this AC DC converter, the analog IC type is SWITCHING CONTROLLER .This AC/DC converter is suitable for operation in the range of 8.5V~16V supply voltage (Vcc/Vdd).There are a total of 16 terminations.Approximately 16 pins are present on the ac/dc converter.There are 16 pins in total.If you select the UCC2894 family, you will be able to search similar acdc converters.There are 1 outputs to run.AC to DC converter is included in Switching Regulator or Controllers .We are setting the output current to 150mA .This AC/DC converter produces a voltage of 11.1V as its output.As long as AC to DC converter is operated at frequency 1MHz ,it is capable of attaining high efficiency.An interface IC conducts when its supply voltage is 12V .Remember that this AC to DC converter should be set to 12V at all times. UCC2894DRG4 FeaturesPackaged with 16-SOIC (0.154, 3.90mm Width) With 16 pins Output Current at 150mA Operating Supply Voltage at the range of 12V UCC2894DRG4 ApplicationsThere are a lot of Texas Instruments UCC2894DRG4 AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC2809PTR-1G4 OverviewIn the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) , the ac to dc converter is embedded.The ac dc converter is available in Tape & Reel (TR) case.The AC/DC converter is mounted in the way of Surface Mount .It is necessary to operate the ac dc converter at a temperature of -55°C~150°C TJ °C in order for it to perform properly.In this AC DC converter, the analog IC type is SWITCHING CONTROLLER .This AC/DC converter is designed for use within the range of 8V~19V supply voltage (Vcc/Vdd).There have been 8 terminations of this program.It contains 8 pins.The pins of the ac-dc converter total to 8 .The ac dc converters are suitable to mount by Surface Mount .The UCC2809 family allows you to search for similar acdc converters.The number of outputs to run is 1 .The ac to dc conversions are included in Switching Regulator or Controllers .Currently, the output current is set to 80mA .There is 800mV voltage output from it.A high efficiency is achieved when operating at a frequency of 1MHz .It is imperative that this AC to DC converter is set to 12V at all times. UCC2809PTR-1G4 FeaturesPackaged with 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) With 8 pins Output Current at 80mA UCC2809PTR-1G4 ApplicationsThere are a lot of Texas Instruments UCC2809PTR-1G4 AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC3889DG4 OverviewIn the 8-SOIC (0.154, 3.90mm Width) package, the ac to dc converter is embedded.In Tube AC/DC power converter, it is available.In this case, the AC/DC converter is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of 0°C~70°C TA degrees Celsius.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.A range of 6.3V~9.3V supply voltages (Vcc/Vdd) can be used.As a result, it has a total of 8 terminations.On this ac/dc converter, there are 8 pins.A total of 8 pins are present on the ac-dc converter.It are possible to mount thare ac dc converters by Surface Mount .You can search similar acdc converters based on UCC3889 family.There are 1 outputs to be processed.AC to DC converter is contained in Switching Regulator or Controllers .Currently, the output current is set to 100mA .Its output voltage amounts to 17.5V .When operating at a frequency of 250kHz , AC to DC converter is capable of reaching high efficiency.The input voltage with the maximal value of 9.3V can be ensured on the basis of unique technique.At 9V supply voltage, the interface IC conducts. UCC3889DG4 FeaturesPackaged with 8-SOIC (0.154, 3.90mm Width) With 8 pins Output Current at 100mA Operating Supply Voltage at the range of 9V UCC3889DG4 ApplicationsThere are a lot of Texas Instruments UCC3889DG4 AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC2894PWR OverviewIn the 16-TSSOP (0.173, 4.40mm Width) package, the ac to dc converter is embedded.The AC/DC power converter Tape & Reel (TR) is available for this product.The AC/DC converter is mounted in the way of Surface Mount .The ac dc converter should be operated at a temperature of -40°C~105°C TJ °C to deliver its optimal performance.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.The AC/DC converter is capable of being used when the supply voltage is 8.5V~16V (Vcc/Vdd).As a result, it has a total of 16 terminations.On this ac/dc converter, there are 16 pins.Up to 16 pins are present on the ac-dc converter.A similar acdc converter can be searched by using the UCC2894 family.There are 1 outputs to be run.There are a ac to dc conversions included in Switching Regulator or Controllers .AC to DC converter is set to 150mA for the output current.In this AC to DC transformer, the output voltage is 11.1V .AC to DC converter reaches high efficiency when operated at a frequency of 1MHz .When the supply voltage is 12V , the interface IC may conduct.In all situations, this AC to DC converter should be set to 12V . UCC2894PWR FeaturesPackaged with 16-TSSOP (0.173, 4.40mm Width) With 16 pins Output Current at 150mA Operating Supply Voltage at the range of 12V UCC2894PWR ApplicationsThere are a lot of Texas Instruments UCC2894PWR AC DC Converters applications.
|
2991
In-stock
|
Get Quote | |||
Infineon Technologies | ICE2A180ZXKLA1 OverviewThe ac to dc converter is embedded in 7-DIP Module package.The ac dc converter is available in Tube case.Through Hole is mounted in the way of this AC/DC converter.For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.At this point, the switching frequency reaches 100kHz .A range of 8.5V~21V supply voltages (Vcc/Vdd) can be used.As a result, it has a total of 7 terminations.In this ac/dc converter, there are 7 pins.There are 7 pins in the ac-dc converter.The ac dc converters are suitable for mounting by Through Hole .A member of the CoolSET?F2 manufacturer family, it has the following characteristics.A similar acdc converter can be searched by using the ICE2A180 family.We are setting the output current to 1A .Its output voltage is800V .In the AC to DC transformer of a coverter, the output power generated is 31W .As soon as the supply voltage drops to 21V , the interface IC conducts.A minimum voltage supply across the converter is 90V .264V is the maximum supply voltage across the converter.In total, there are 1 channels. ICE2A180ZXKLA1 FeaturesPackaged with 7-DIP Module Switching Frequency at 100kHz With 7 pins Output Current at 1A Operating Supply Voltage at the range of 21V With 1 channels on it ICE2A180ZXKLA1 ApplicationsThere are a lot of Infineon Technologies ICE2A180ZXKLA1 AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments |
15974
In-stock
|
Get Quote | ||||
Texas Instruments | UCC2808APW-1G4 OverviewAn embedded ac to dc converter is included in 8-TSSOP (0.173, 4.40mm Width) package.Tray case is available for the ac dc converter.It is mounted in the way of Surface Mount .The ac dc converter should be operated at a temperature of -55°C~150°C TJ °C to deliver its optimal performance.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.This AC/DC converter is suitable for operation in the range of 8.3V~15V supply voltage (Vcc/Vdd).As a result, it has a total of 8 terminations.There are 8 pins on the ac/dc converter.There are a total of 8 pins on the ac-dc converter.The ac dc converters are suitable to mount by Surface Mount .Similar acdc converters can be found using the UCC2808 family.AC to DC converter is necessary to run 2 outputs.The ac to dc conversions are included in Switching Regulator or Controllers .It has been set to 100mA for the output current.The output voltage of the AC/DC converter is 500mV .As long as AC to DC converter is operated at frequency 1MHz ,it is capable of attaining high efficiency.On the basis of a unique technique, the input voltage can be ensured to be 13V .You should always set this AC to DC converter to 10V . UCC2808APW-1G4 FeaturesPackaged with 8-TSSOP (0.173, 4.40mm Width) With 8 pins Output Current at 100mA UCC2808APW-1G4 ApplicationsThere are a lot of Texas Instruments UCC2808APW-1G4 AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | MIC38C44-1YN OverviewAn embedded ac to dc converter is included in 14-DIP (0.300, 7.62mm) package.In Tube AC/DC power converter, it is available.There is a mounting point for this AC/DC converter in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.In this AC to DC transformer, the switching frequency is 500kHz .The AC/DC converter is capable of being used when the supply voltage is 9V~20V (Vcc/Vdd).In total, it has 14 terminations.The ac/dc converter has 14 pins.Through Hole is the recommended mounting method for the ac dc converters.Search similar acdc converters based on MIC38C44 family members.In this AC to DC transformer, there are 1 outputs to run.It has been set to 500A for the output current.The input voltage with the maximal value of 30V can be ensured on the basis of unique technique. MIC38C44-1YN FeaturesPackaged with 14-DIP (0.300, 7.62mm) Switching Frequency at 500kHz With 14 pins Output Current at 500A MIC38C44-1YN ApplicationsThere are a lot of Microchip Technology MIC38C44-1YN AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | MIC38HC44-1YN OverviewAn embedded ac to dc converter is included in 14-DIP (0.300, 7.62mm) package.In Tube AC/DC power converter, it is available.The AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.This AC DC converter employs SWITCHING CONTROLLER analog IC type.In this AC to DC transformer, the switching frequency is 500kHz .The voltage range of the supply can be set to 9V~20V (Vcc/Vdd).Total terminations are 14 .In this ac/dc converter, there are 14 pins.It are possible to mount thare ac dc converters by Through Hole .It is possible to search for similar acdc converters by using the MIC38HC44 family.There are 1 outputs to run.We have set the output current to 1kA .It produces a voltage of 5V . MIC38HC44-1YN FeaturesPackaged with 14-DIP (0.300, 7.62mm) Switching Frequency at 500kHz With 14 pins Output Current at 1kA MIC38HC44-1YN ApplicationsThere are a lot of Microchip Technology MIC38HC44-1YN AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC2810DWTR OverviewAn embedded ac to dc converter is included in 16-SOIC (0.295, 7.50mm Width) package.It is available in Tape & Reel (TR) AC/DC power converter.This AC/DC converter is mounted in the way of Surface Mount .The ac dc converter should be operated at a temperature of 0°C~70°C TA °C to deliver its optimal performance.An analog IC of type DUAL SWITCHING CONTROLLER is employed in this AC DC converter.Vcc/Vdd can be used within the range of 8.3V~11V supply voltage.It has a total of 16 terminations.It contains 16 pins.There are a total of 16 pins on the ac-dc converter.The ac dc converters are suitable to mount by Surface Mount .It is possible to search for similar acdc converters by using the UCC2810 family.A total of 2 outputs are to be processed.AC to DC converter is contained in Switching Regulator or Controllers .The output current is set to 200mA .In this AC to DC transformer, the output voltage is 1.2V .This power AC DC is capable of reaching high efficiency when operating at a frequency of 1MHz .Using a unique technique, it is possible to ensure an input voltage with a maximum value of 11V . UCC2810DWTR FeaturesPackaged with 16-SOIC (0.295, 7.50mm Width) With 16 pins Output Current at 200mA UCC2810DWTR ApplicationsThere are a lot of Texas Instruments UCC2810DWTR AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC2810DWTRG4 OverviewThere is a ac to dc converter embedded in package 16-SOIC (0.295, 7.50mm Width) .You can get it in AC/DC power converter Tape & Reel (TR) .As you can see, this AC/DC converter is mounted in the way of Surface Mount .This ac dc converter should be operated at a temperature of 0°C~70°C TA °C so that it can deliver its performance.An analog IC of type DUAL SWITCHING CONTROLLER is employed in this AC DC converter.A range of 8.3V~11V supply voltages (Vcc/Vdd) can be used.In total, it has 16 terminations.On this ac/dc converter, there are 16 pins.The pins of the ac-dc converter count up to 16 .It are possible to mount thare ac dc converters by Surface Mount .It is possible to search for similar acdc converters by using the UCC2810 family.A total of 2 outputs are available for processing.Switching Regulator or Controllers includes the ac to dc conversions.It has been set to 200mA for the output current.This AC/DC converter produces a voltage of 1.2V as its output.This power AC DC is capable of reaching high efficiencies when operating at a frequency of 1MHz .On the basis of a unique technique, it is possible to ensure an input voltage with the maximum value of 11V . UCC2810DWTRG4 FeaturesPackaged with 16-SOIC (0.295, 7.50mm Width) With 16 pins Output Current at 200mA UCC2810DWTRG4 ApplicationsThere are a lot of Texas Instruments UCC2810DWTRG4 AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC3804DG4 OverviewAn embedded ac to dc converter is included in 8-SOIC (0.154, 3.90mm Width) package.It is available in Tube AC/DC power converter.Surface Mount is mounted in the way of this AC/DC converter.The ac dc converter needs to be operated at -40°C~85°C TA °C in order to perform.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.As a result, the switching frequency reaches Up to 1MHz .The voltage range of the supply can be set to 8.3V~12V (Vcc/Vdd).There are a total of 8 terminations.On the ac/dc converter, there are 8 pins.There are a total of 8 pins on the ac-dc converter.Suitable mounting is provided by Surface Mount .Search similar acdc converters based on UCC3804 family members.A total of 1 outputs need to be run.AC to DC converter is included in Switching Regulator or Controllers .The output current is set to 1A .Its output voltage is5.075V .A high efficiency is achieved when operating at a frequency of 1MHz .You can read the standard for REACH SVHC at: No SVHC .It is imperative that this AC to DC converter is set to 10V at all times. UCC3804DG4 FeaturesPackaged with 8-SOIC (0.154, 3.90mm Width) Switching Frequency at Up to 1MHz With 8 pins Output Current at 1A UCC3804DG4 ApplicationsThere are a lot of Texas Instruments UCC3804DG4 AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC2809PW-1 OverviewA ac to dc converter of the package 8-TSSOP (0.173, 4.40mm Width) contains the ac to dc converter.In Tray case, the ac dc converter is available.It is mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -55°C~150°C TJ °C.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.The AC/DC converter is capable of being used when the supply voltage is 8V~19V (Vcc/Vdd).There have been 8 terminations of this program.The ac/dc converter has a total of 8 pins.In this ac-dc converter, there are 8 pins.The ac dc converters is suitable for mounting by Surface Mount .You can search similar acdc converters based on UCC2809 family.There are 1 outputs to be run.AC to DC converter is included in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 80mA .The voltage output by this AC/DC converter is 800mV .AC to DC converter reaches high efficiency when operated at a frequency of 1MHz .Keep in mind that this AC to DC converter should always be set to 12V . UCC2809PW-1 FeaturesPackaged with 8-TSSOP (0.173, 4.40mm Width) With 8 pins Output Current at 80mA UCC2809PW-1 ApplicationsThere are a lot of Texas Instruments UCC2809PW-1 AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC3895PWTR OverviewThere is a ac to dc converter embedded in package 20-TSSOP (0.173, 4.40mm Width) .There is a AC/DC power converter of Tape & Reel (TR) available.Surface Mount mounts this AC/DC converter.The ac dc converter should be operated at a temperature of -55°C~150°C TJ °C to deliver its optimal performance.The AC DC converter uses a type SWITCHING CONTROLLER analog integrated circuit.A range of 10V~16.5V supply voltages (Vcc/Vdd) can be used.A total of 20 terminations have been recorded.Approximately 20 pins are present on the ac/dc converter.There are 20 pins in total.The ac dc converters are suitable to mount by Surface Mount .Search similar acdc converters based on UCC3895 family members.There are 4 outputs to be processed.The ac to dc conversions are included in Switching Regulator or Controllers .Currently, the output current is set to 10mA .There is 250mV voltage output from it.As long as AC to DC converter is operated at frequency 1MHz ,it is capable of attaining high efficiency.The input voltage with the maximal value of 16.5V can be ensured on the basis of unique technique.It is also possible to detect ALSO OPERATES IN CURRENT MODE when utilizing this ACDC converter.Always keep this AC to DC converter set to 12V . UCC3895PWTR FeaturesPackaged with 20-TSSOP (0.173, 4.40mm Width) With 20 pins Output Current at 10mA UCC3895PWTR ApplicationsThere are a lot of Texas Instruments UCC3895PWTR AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | MIC38HC42-1YM-TR Overview14-SOIC (0.154, 3.90mm Width) is the package in which the ac to dc converter is embedded.In Tape & Reel (TR) AC/DC power converter, it is available.Surface Mount mounts this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.It can be used within the range of 9V~20V supply voltage (Vcc/Vdd).As a result, it has a total of 14 terminations.There are 14 pins on this ac/dc converter.It are possible to mount thare ac dc converters by Surface Mount .If you select the MIC38HC42 family, you will be able to search similar acdc converters.A total of 1 outputs are to be processed.AC to DC converter is set to 1kA for the output current.Its output voltage amounts to 5V .500kHz is its maximum frequency. MIC38HC42-1YM-TR FeaturesPackaged with 14-SOIC (0.154, 3.90mm Width) With 14 pins Output Current at 1kA MIC38HC42-1YM-TR ApplicationsThere are a lot of Microchip Technology MIC38HC42-1YM-TR AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC28083DG4 OverviewIt is embedded in package 8-SOIC (0.154, 3.90mm Width) .The AC/DC power converter is available in Tube .There is a AC/DC converter mounted in the way of Surface Mount .The ac dc converter should be operated at a temperature of -40°C~85°C TA °C to deliver its optimal performance.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.In this AC to DC transformer, the switching frequency is 50kHz~1MHz .The AC/DC converter is capable of being used when the supply voltage is 8.3V~15V (Vcc/Vdd).As a result, it has had 8 terminations.The ac/dc converter has a total of 8 pins.The pins of the ac-dc converter total to 8 .It is possible to search for similar acdc converters by using the UCC28083 family.There are 2 outputs to run.Switching Regulator or Controllers contains the ac to dc conversions.In this AC to DC transformer, the output current is set to 1A .As a result, its output voltage is 1V .The power AC DC is capable of high efficiency when operated at a frequency of 200kHz .This is the standard of REACH SVHC : No SVHC . UCC28083DG4 FeaturesPackaged with 8-SOIC (0.154, 3.90mm Width) Switching Frequency at 50kHz~1MHz With 8 pins Output Current at 1A UCC28083DG4 ApplicationsThere are a lot of Texas Instruments UCC28083DG4 AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | MIC38HC42-1YN OverviewIn the package 14-DIP (0.300, 7.62mm) , the ac to dc converter is embedded.The AC/DC power converter type is Tube .In this case, the AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.At this point, the switching frequency reaches 500kHz .A range of 9V~20V supply voltages (Vcc/Vdd) can be used.It has a total of 14 terminations.A ac/dc converter with 14 pins is available.Through Hole is a suitable mounting point for the ac dc converters.The MIC38HC42 family allows you to search for similar acdc converters.The number of outputs to run is 1 .Current output is set to 1kA .Its output voltage amounts to 5V . MIC38HC42-1YN FeaturesPackaged with 14-DIP (0.300, 7.62mm) Switching Frequency at 500kHz With 14 pins Output Current at 1kA MIC38HC42-1YN ApplicationsThere are a lot of Microchip Technology MIC38HC42-1YN AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC2580DTR-2 OverviewThis ac to dc converter is included in the package 16-SOIC (0.154, 3.90mm Width) .The AC/DC power converter type is Tape & Reel (TR) .In this case, the AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -55°C~150°C TJ °C.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.The AC/DC converter is capable of being used when the supply voltage is 8.5V~15V (Vcc/Vdd).There are a total of 16 terminations.It contains 16 pins.The ac-dc converter has 16 pins.Surface Mount is the recommended mounting method for the ac dc converters.The UCC2580 family can be used to search for similar acdc converters.AC to DC converter is necessary to run 2 outputs.The following ac to dc conversions are contained in Switching Regulator or Controllers .It has been set to 100mA for the output current.There is 400mV output voltage from this AC/DC converter.The power AC DC is capable of high efficiency when operated at a frequency of 1MHz .It is possible to ensure a maximum value of 14V for the input voltage using a unique technique.This AC to DC converter should always be set to 12V . UCC2580DTR-2 FeaturesPackaged with 16-SOIC (0.154, 3.90mm Width) With 16 pins Output Current at 100mA UCC2580DTR-2 ApplicationsThere are a lot of Texas Instruments UCC2580DTR-2 AC DC Converters applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | UCC3802DG4 OverviewThe ac to dc converter is embedded in 8-SOIC (0.154, 3.90mm Width) package.The AC/DC power converter is available in Tube .In this case, the AC/DC converter is mounted in the way of Surface Mount .The ac dc converter needs to be operated at -40°C~85°C TA °C in order to perform.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.When the switching frequency reaches Up to 1MHz , the process is complete.A range of 8.3V~12V supply voltages (Vcc/Vdd) can be used.As a result, it has had 8 terminations.The ac/dc converter has 8 pins.In this ac-dc converter, there are 8 pins.Surface Mount are the recommended mounting method for the ac dc converters.If you select the UCC3802 family, you will be able to search for similar acdc converters.A total of 1 outputs are available for processing.The following ac to dc conversions are contained in Switching Regulator or Controllers .Currently, the output current is set to 1A .In this AC to DC transformer, the output voltage is 5V .AC to DC converter reaches high efficiency when operated at a frequency of 1MHz .In the following link, you will find the REACH SVHC standard: No SVHC .Remember that this AC to DC converter should be set to 10V at all times. UCC3802DG4 FeaturesPackaged with 8-SOIC (0.154, 3.90mm Width) Switching Frequency at Up to 1MHz With 8 pins Output Current at 1A UCC3802DG4 ApplicationsThere are a lot of Texas Instruments UCC3802DG4 AC DC Converters applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.