|
|
Cherry Americas LLC |
TLE7250VSJXUMA1 Overview This driver chip is excellent for driving common LEDs due to its enhanced 8-SOIC (0.154, 3.90mm Width) package.The Tape & Reel (TR) package contains this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.On any Surface Mount-type PCB or development board, you can install this wide receiver.It takes 4.5V~5.5V from the power supply to run this differential driver.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.IC receiver is designed for applications with a temperature of -40°C~150°C.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.Integrated into this wide receiver are 8 terminations that are used for driving and receiving signals from data.An enhanced power dissipation control is provided by this 8-pin driver IC.This transceiver module is designed to operate from an input voltage supply of 3.3V.The module isolated transceiver implements a total of 1 transceivers.
TLE7250VSJXUMA1 Features Tape & Reel (TR) package 8 pins
TLE7250VSJXUMA1 Applications There are a lot of Infineon Technologies TLE7250VSJXUMA1 Drivers/Receivers/Transceivers applications.
- Tuner
- Satellite communication
- Shortwave receiver
- Interconnection between switches and computers
- Satellite ground stations
- Satellite radio receiver
- Desktop PC
- Desktop radio
- Cordless telephone
- Satellite communications networks
|
|
999
In-stock
|
Get Quote
|
|
|
Ultralife |
SN75189D Overview An excellent driver IC for common LEDs thanks to its enhanced 14-SOIC (0.154, 3.90mm Width) package.This receiver is mounted in the Tube package.Since this part is a Receiver can transceiver, a number of solutions have been able to utiliReceivere it for various purposes.You can place this wide receiver to any Surface Mount-type PCB or development board.Power supply requirements for this differential driver are 4.5V~5.5V.At any one time, this electronic part can have up to 0/4 eligible receivers/drivers.This ic receiver has been primarily designed for applications where the operating temperature is 0°C~70°C.With a voltage range of 5V, this driver IC can operate efficiently.Wide receiver has 14 terminations built in for driving or receiving signals from data.There are 14 pinouts available on this transceiver which are market standard.As the base part number SN75189 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.This is a 14-pin driver IC with enhanced power dissipation control.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.There is a voltage supply of 5V required in order for this transceiver module to be operated.This driver IC is designed to operate from a 5V power supply.In module isolated transceiver are 4 receivers.0 drivers are embedded on the integrator circuit.Additionally, this optical transceiver module features the RESPONSE CONTROL function, which improves the stability and accuracy of signal management in general.In addWide receiverion to delivering voltage at 5V, Wide receiver also has the abilWide receivery to measure voltage.
SN75189D Features Tube package 14 pin count 14 pins 5V power supply
SN75189D Applications There are a lot of Texas Instruments SN75189D Drivers/Receivers/Transceivers applications.
- Wireless network systems
- Fast Ethernet
- Remote controls
- Broadcast application
- Wireless transmission
- transmission relay
- Televisions
- Aircraft navigation
- Data center
- Ethernet circuitry
|
|
999
In-stock
|
Get Quote
|
|
|
Ultralife |
DS90LV012ATMF OverviewDriver ICs with enhanced SC-74A, SOT-753 packages are excellent for driving LEDs with common characteristics.In the Tape & Reel (TR) package, this receiver is mounted.With its Receiver can transceiver design, this part can be incorporated into a wide range of solutions.The wide receiver can be mounted on any Surface Mount-type PCB or development board.In terms of power supply, this differential driver utilizes 2.7V~3.6V.As many as 0/1 eligible receivers/drivers can be used simultaneously with this electronic part.Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.There is a voltage range of 3.3V for this line driver ic, so it can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.DS90LV012 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.An enhanced power dissipation control is provided by this 5-pin driver IC.As a result of optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size has been greatly reduced.As a rule of thumb, this receiver is typically specified with a resolution of 1 bits.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 3.3V.The integrated circuit consists of 1 elements that ensure effintegrated circuitient handling of multiple tasks. DS90LV012ATMF FeaturesTape & Reel (TR) package 5 pin count 5 pins 1 elements DS90LV012ATMF ApplicationsThere are a lot of Texas Instruments DS90LV012ATMF Drivers/Receivers/Transceivers applications. - Wireless network systems
- Satellite communications networks
- Ethernet circuitry
- Wired telephone
- Cordless telephone
- Desktop PC
- Notebook
- Pocket PC
- Desktop radio
- Clock radio
|
|
3966
In-stock
|
Get Quote
|
|
|
Ultralife |
SN65HVD1050AQDRQ1 Overview An excellent driver IC for common LEDs thanks to its enhanced 8-SOIC (0.154, 3.90mm Width) package.This receiver is mounted in the Tape & Reel (TR) package.The Transceiver can transceiver type enables this part to be used in a wide range of applications.This wide receiver can be placed on any Surface Mount-type PCB or development board.Power supply for this differential driver is 4.75V~5.25V.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~125°C.An output voltage range of 5V is sufficient to run this line driver ic efficiently.Wide receiver has 8 terminations built in for driving or receiving signals from data.There are 8 pinouts available on this transceiver which are market standard.You can search with 65HVD1050 to get more variants of this part, since it identifies the product type, temperature, package, etc.It is a 8-pin driver IC with enhanced power dissipation controls.There are two types of input voltage supply available for this IC, 5V.A Network Interfaces subcategory can be assigned to this rf transceiver module.Driver ICs such as this one are designed to operate from 5V power sources.The module isolated transceivers are 1 receivers.Using the input voltage of 70mA, this integrating circuit is capable of driving LEDs with an output voltage of 12 volts.This line driver integrating circuit represents a power-saving technique that is part of the Automotive, AEC-Q100 series.
SN65HVD1050AQDRQ1 Features Tape & Reel (TR) package 8 pin count 8 pins 5V power supply Automotive, AEC-Q100 series
SN65HVD1050AQDRQ1 Applications There are a lot of Texas Instruments SN65HVD1050AQDRQ1 Drivers/Receivers/Transceivers applications.
- WDM transmission
- Wireless network systems
- Bridges
- IPTV front end
- Wireless showroom
- Car radio
- Laser diode bonding
- Wireless smart house
- Sensor reporting
- Desktop PC
|
|
999
In-stock
|
Get Quote
|
|
|
Ultralife |
SN75188D OverviewWith the enhanced 14-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.This receiver is mounted in the Tube package.Being a Driver can transceiver, this part has empowered many solutions to serve for a variety of applications.You can place this wide receiver to any Surface Mount-type PCB or development board.With respect to the power supply, this differential driver uses ±7.5V~15V.This electronic part can have up to 4/0 eligible receivers/drivers on the field at once. This ic receiver has been primarily designed for applications where the operating temperature is 0°C~70°C.This line driver ic can operate efficiently with a supply voltage range of 9V.For driving and receiving signals from data, this wide receiver has 14 terminations integrated.This transceiver is packaged with 14 market standard pinoutsAs the base part number SN75188 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.This is a 14-pin driver IC with enhanced power dissipation control.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.This transceiver module is designed to operate from an input voltage supply of 9V.This electronic part can have up to 4 eligible drivers on the field at once. According to the datasheet, when you try to enhance the line driver ic performance using negative voltage, -9V would be ideal for this purpose.Wide receiver provides the output voltage of 10.5V.This integrator circuit includes a 15V V maximum dual supply voltage arrangement.When this can transceiver is dealing with dual supply voltage, you'd better choose a power supply applcan transceiverable for 7.5V V output. SN75188D FeaturesTube package 14 pin count 14 pins SN75188D ApplicationsThere are a lot of Texas Instruments SN75188D Drivers/Receivers/Transceivers applications. - Televisions
- Cell phones
- Wireless modems
- Remote controls
- Wireless network systems
- Satellite communications networks
- Ethernet circuitry
- Wired telephone
- Cordless telephone
- Desktop PC
|
|
25476
In-stock
|
Get Quote
|
|
|
Cherry Americas LLC |
TLE7250GXUMA1 OverviewAn excellent driver IC for common LEDs thanks to its enhanced 8-SOIC (0.154, 3.90mm Width) package.The Tape & Reel (TR) package houses this receiver.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.A Surface Mount-type PCB or development board can be used to place this wide receiver.Power supply requirements for this differential driver are 4.75V~5.25V.At any one time, this electronic part can have up to 1/1 eligible receivers/drivers.An operating voltage range of 5V is suitable for this line driver ic.This wide receiver has 8 terminations for driving and receiving data signals.Since the part number TLE7250 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.The driver IC has improved power dissipation control.There is a 5V input voltage supply that can be used to operate this transceiver module.The module isolated transceiver implements a total of 1 transceivers. TLE7250GXUMA1 FeaturesTape & Reel (TR) package 8 pins TLE7250GXUMA1 ApplicationsThere are a lot of Infineon Technologies TLE7250GXUMA1 Drivers/Receivers/Transceivers applications. - Remote controls
- Wireless network systems
- Satellite communications networks
- Ethernet circuitry
- Wired telephone
- Cordless telephone
- Desktop PC
- Notebook
- Pocket PC
- Desktop radio
|
|
50
In-stock
|
Get Quote
|
|
|
Ultralife |
SN75189AD OverviewDue to the enhanced 14-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.Tube package is used for this receiver.Several solutions have used this Receiver can transceiver in a variety of applications due to its Receiver IC nature.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.A power supply of 4.5V~5.5V is used by this differential driver.Up to 0/4 receivers/drivers can be installed simultaneously on this electronic part.For applications where the operating temperature is 0°C~70°C, this ic receiver was designed primarily.With a voltage range of 5V, this driver IC can operate efficiently.In order to drive and receive signals from data, this wide receiver has 14 terminations integrated.In this package, you will find 14 market-standard pinouts for this transceiver.This part number SN75189 can be used to search for more variants based on the product type, temperature, package, etc.An enhanced power dissipation driver IC with 14 pins.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Surface Mount mounting technologies.There is typically a resolution of 4 bits specified with this receiver.This transceiver module is designed to operate from an input voltage supply of 5V.Driver ICs such as this one are designed to operate from 5V power sources.0 drivers are embedded on the integrator circuit.A RESPONSE CONTROL function is also included on this optical transceiver module, which improves the overall signal management accuracy and stability.There are a total of 4 channels embedded in this optical transceiver. SN75189AD FeaturesTube package 14 pin count 14 pins 5V power supply 4 channels SN75189AD ApplicationsThere are a lot of Texas Instruments SN75189AD Drivers/Receivers/Transceivers applications. - Wireless modems
- Remote controls
- Wireless network systems
- Satellite communications networks
- Ethernet circuitry
- Wired telephone
- Cordless telephone
- Desktop PC
- Notebook
- Pocket PC
|
|
70023
In-stock
|
Get Quote
|
|
|
Ultralife |
TUSB1106PWR OverviewDesigned for common LEDs, this driver IC features an enhanced 16-TSSOP (0.173, 4.40mm Width) package.There is a Tape & Reel (TR) package for this receiver.The Transceiver can transceiver type enables this part to be used in a wide range of applications.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.A differential driver like this uses 1.65V~3.6V of power.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.IC receiver's like this are designed for applications requiring a -40°C~85°C operating temperature.An output voltage range of 5V is sufficient to run this line driver ic efficiently.There are 16 terminations in this wide receiver so that signals can be driven from the data and received.The transceiver is packaged with 16 market standard pinouts so that it can be easily used.You can search with TUSB1106 to get more variants of this part, since it identifies the product type, temperature, package, etc.16-pin driver chip with enhanced power dissipation.There are two types of input voltage supply available for this IC, 5V.A IT REQUIRES 3.3V SUPPLY function is also included in this optical transceiver module, which improves stability and accuracy of signal management.With an input voltage of 6mA, this integrating circuit has the ability to drive LEDs with an output voltage of 6mA.It requires a voltage supply of at least 4V in order to run. TUSB1106PWR FeaturesTape & Reel (TR) package 16 pin count 16 pins TUSB1106PWR ApplicationsThere are a lot of Texas Instruments TUSB1106PWR Drivers/Receivers/Transceivers applications. - Wired telephone
- Cordless telephone
- Desktop PC
- Notebook
- Pocket PC
- Desktop radio
- Clock radio
- Tuner
- Portable radio
- Car radio
|
|
6221
In-stock
|
Get Quote
|
|
|
Ultralife |
SN751178NS OverviewThis LED driver IC features an enhanced 16-SOIC (0.209, 5.30mm Width) package for driving common LEDs.As a Transceiver can transceiver, this part has enabled many applications to be served.This wide receiver can be placed on any Surface Mount-type PCB or development board.This differential driver uses 4.75V~5.25V for power supply.There can be up to 2/2 eligible receivers/drivers on the field at the same time with this electronic part.IC receiver has been designed primarily for applications operating at -20°C~85°C TA.With a supply voltage range of 5V, this line driver ic operates efficiently.16 terminations are integrated into this wide receiver for driving and receiving signals from data.It is packaged with 16 pinouts that are market standard for this particular transceiver.The base part number SN751178 identifies the product type, temperature, package, etc., so you can search for more variants by using it.A 16-pin driver IC with enhanced power dissipation control is featured here.Using this ic receiver, you were able to achieve a resolution of 2 bits.It is typical for this receiver to have a resolution of 2 bits when it is specified.Line Driver or Receivers is a subcategory of this rf transceiver module.The driver IC in this product is designed so that it can be powered by 5V.The TRISTATABLE RECEIVERS function of this optical transceiver module improves the overall stability and accuracy of signal management.The VCC pin of the ic receiver should receive enough but not more than 110mA of input current. SN751178NS Features16 pin count 16 pins 5V power supply SN751178NS ApplicationsThere are a lot of Texas Instruments SN751178NS Drivers/Receivers/Transceivers applications. - Cell phones
- Wireless modems
- Remote controls
- Wireless network systems
- Satellite communications networks
- Ethernet circuitry
- Wired telephone
- Cordless telephone
- Desktop PC
- Notebook
|
|
5080
In-stock
|
Get Quote
|
|
|
APS |
KSZ9021GQI OverviewLED drivers with the enhanced 128-BFQFP package will be able to drive a variety of common LEDs with ease.In this package, the receiver is mounted in the Tray format.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.Power supply for this differential driver is 3.135V~3.465V.It is possible to have up to 8/8 receivers/drivers in use simultaneously with this electronic part.The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.With the part number KSZ9021 identifying the product type, temperature, package, etc., you can search with it to see more variants.It is a 128-pin driver IC with enhanced power dissipation controls.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.There is a voltage supply of 3.3V required in order for this transceiver module to be operated.There are 1 transceivers in total that this module isolated transceiver implements.The box contains 1 receivers.A transceiver module's temperature less than 85°C must be used for operation.This optical transceiver must not be operated at a temperature below -40°C when it is at its minimum operating temperature.It is specified that the transceiver's maximum supply voltage for this IC shall be 3.465V.In the case of input current exceeding 555mA, this can transceiver may malfunction.This line driver ic requires a minimum voltage supply of 3.135V in order to operate properly.As part of the 128-PQFP (14x20) supplier package, this line driver ic is integrated into the system.optical transceivers such as this one have a total of 1 channels embedded into them. KSZ9021GQI FeaturesTray package 128 pins 1 channels KSZ9021GQI ApplicationsThere are a lot of Microchip Technology KSZ9021GQI Drivers/Receivers/Transceivers applications. - Ethernet circuitry
- Wired telephone
- Cordless telephone
- Desktop PC
- Notebook
- Pocket PC
- Desktop radio
- Clock radio
- Tuner
- Portable radio
|
|
5247
In-stock
|
Get Quote
|
|
|
Ultralife |
ISO1410DW OverviewThe enhanced 16-SOIC (0.295, 7.50mm Width) package makes it an excellent LED driver.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.On any Surface Mount-type PCB or development board, this wide receiver can be placed.This differential driver consumes 1.71V~1.89V 2.25V~5.5V for its power supplyAs many as 1/1 receivers/drivers are eligible for use on this electronic part.In most applications, this ic receiver is used in environments where -40°C~125°C TA is the operating temperature.Wide receiver can operate within the range of 3.3V supply voltages efficiently.This integrated circuit has 16 terminations designed for driving and receiving signals from data.Since the base part number ISO1410 describes the product type, temperature, package, etc., you might get more options by searching with it.An important feature of this ic receiver was its 1-bit resolution capability.There is usually a 1-bit resolution specified for this receiver when it is used. ISO1410DW FeaturesISO1410DW ApplicationsThere are a lot of Texas Instruments ISO1410DW Drivers/Receivers/Transceivers applications. - Desktop PC
- Notebook
- Pocket PC
- Desktop radio
- Clock radio
- Tuner
- Portable radio
- Car radio
- Satellite radio receiver
- Shortwave receiver
|
|
2244
In-stock
|
Get Quote
|
|
|
Ultralife |
ISO1042BQDWQ1 OverviewWith the enhanced 16-SOIC (0.295, 7.50mm Width) package, this driver IC is excellent for driving common LEDs.This receiver is mounted in the Tube package.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.You can place this wide receiver to any Surface Mount-type PCB or development board.With respect to the power supply, this differential driver uses 1.71V~1.89V 2.25V~5.5V.This electronic part can have up to 1/1 eligible receivers/drivers on the field at once. This ic receiver has been primarily designed for applications where the operating temperature is -40°C~125°C.This line driver ic can operate efficiently with a supply voltage range of 1.8V.For driving and receiving signals from data, this wide receiver has 16 terminations integrated.As the base part number ISO1042 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.This integrating circuit is one of the Automotive, AEC-Q100 series, representing an enhanced power-saving technique. ISO1042BQDWQ1 FeaturesTube package Automotive, AEC-Q100 series ISO1042BQDWQ1 ApplicationsThere are a lot of Texas Instruments ISO1042BQDWQ1 Drivers/Receivers/Transceivers applications. - Televisions
- Cell phones
- Wireless modems
- Remote controls
- Wireless network systems
- Satellite communications networks
- Ethernet circuitry
- Wired telephone
- Cordless telephone
- Desktop PC
|
|
5573
In-stock
|
Get Quote
|
|
|
Kraft Tool Co |
AEIC-7273-S16 OverviewThe enhanced 16-SOIC (0.154, 3.90mm Width) package makes it an excellent LED driver.Tube package is used to mount this receiver.The Driver can transceiver technology has enabled this part to power many solutions for a variety of uses.On any Surface Mount-type PCB or development board, this wide receiver can be placed.This differential driver consumes 3.5V~30V for its power supplyAs many as 4/0 receivers/drivers are eligible for use on this electronic part.In most applications, this ic receiver is used in environments where -55°C~125°C TA is the operating temperature.This integrated circuit has 16 terminations designed for driving and receiving signals from data.Since the base part number AEIC-7273 describes the product type, temperature, package, etc., you might get more options by searching with it.Wide receiver with enhanced power dissipation control, 16-pin.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.An important feature of this ic receiver was its 1-bit resolution capability.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.It is designed to be operated from a 3.5/30V power supply, so the module isolated transceiver will work effectively.A can transceiver that has a current input of 18.5mA or greater may be affected by malfunctions. AEIC-7273-S16 FeaturesTube package 16 pins 3.5/30V power supply AEIC-7273-S16 ApplicationsThere are a lot of Broadcom Limited AEIC-7273-S16 Drivers/Receivers/Transceivers applications. - Desktop PC
- Notebook
- Pocket PC
- Desktop radio
- Clock radio
- Tuner
- Portable radio
- Car radio
- Satellite radio receiver
- Shortwave receiver
|
|
10573
In-stock
|
Get Quote
|
|
|
Ultralife |
DS92CK16TMTC/NOPB OverviewAn excellent driver IC for common LEDs thanks to its enhanced 24-TSSOP (0.173, 4.40mm Width) package.The Tube package houses this receiver.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.A Surface Mount-type PCB or development board can be used to place this wide receiver.Power supply requirements for this differential driver are 3V~3.6V.At any one time, this electronic part can have up to 1/1 eligible receivers/drivers.As its name implies, this ic receiver is designed for applications where -40°C~85°C is the operating temperature.An operating voltage range of 3.3V is suitable for this line driver ic.This wide receiver has 24 terminations for driving and receiving data signals.There are 24 pinouts available on this transceiver which are market standard.Since the part number DS92CK16 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.The driver IC has improved power dissipation control.Its package size is drastically reduced by downsizing ICs and utilizing high-density Surface Mount mounting techniques.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.The module isolated transceivers are 1 receivers.It is capable of driving LEDs with a voltage of 25mA as the input voltage to this integrating circuit.If the input current exceeds 25mA, this can transceiver could malfunction. DS92CK16TMTC/NOPB FeaturesTube package 24 pin count 24 pins DS92CK16TMTC/NOPB ApplicationsThere are a lot of Texas Instruments DS92CK16TMTC/NOPB Drivers/Receivers/Transceivers applications. - Remote controls
- Wireless network systems
- Satellite communications networks
- Ethernet circuitry
- Wired telephone
- Cordless telephone
- Desktop PC
- Notebook
- Pocket PC
- Desktop radio
|
|
3020
In-stock
|
Get Quote
|
|
|
Ultralife |
SN65LBC180AN OverviewDue to the enhanced 14-DIP (0.300, 7.62mm) package, this driver IC is excellent for driving common LEDs.Tube package is used for this receiver.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.PCBs or development boards with Through Hole-types can accommodate this wide receiver.A power supply of 4.75V~5.25V is used by this differential driver.Up to 1/1 receivers/drivers can be installed simultaneously on this electronic part.For applications where the operating temperature is -40°C~85°C, this ic receiver was designed primarily.With a voltage range of 5V, this driver IC can operate efficiently.In order to drive and receive signals from data, this wide receiver has 14 terminations integrated.In this package, you will find 14 market-standard pinouts for this transceiver.This part number 65LBC180 can be used to search for more variants based on the product type, temperature, package, etc.An enhanced power dissipation driver IC with 14 pins.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Through Hole mounting technologies.It is important to note that this ic receiver had a maximum resolution of 1 bits.This transceiver module is designed to operate from an input voltage supply of 5V.There is a subcategory named Line Driver or Receivers for this rf transceiver module.Driver ICs such as this one are designed to operate from 5V power sources.The module isolated transceiver contains 1 receivers.An input voltage of 15mA is recommended for this integrating circuit to be able to drive LEDs. SN65LBC180AN FeaturesTube package 14 pin count 14 pins 5V power supply SN65LBC180AN ApplicationsThere are a lot of Texas Instruments SN65LBC180AN Drivers/Receivers/Transceivers applications. - Wireless modems
- Remote controls
- Wireless network systems
- Satellite communications networks
- Ethernet circuitry
- Wired telephone
- Cordless telephone
- Desktop PC
- Notebook
- Pocket PC
|
|
11326
In-stock
|
Get Quote
|
|
|
Ultralife |
SN75ALS171ADW OverviewLED drivers with the enhanced 20-SOIC (0.295, 7.50mm Width) package will be able to drive a variety of common LEDs with ease.In this package, the receiver is mounted in the Tube format.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.Power supply for this differential driver is 4.75V~5.25V.It is possible to have up to 3/3 receivers/drivers in use simultaneously with this electronic part.The operating temperature of this ic receiver is 0°C~70°C. It is primarily designed for applications with low temperatures.Driver ICs with a supply voltage range of 5V can operate efficiently.Integrated into this wide receiver are 20 terminations that are used for driving and receiving signals from data.A package consisting of 20 market standard pinouts is provided with this integrated circuit.With the part number 75ALS171 identifying the product type, temperature, package, etc., you can search with it to see more variants.It is a 20-pin driver IC with enhanced power dissipation controls.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.Typically, the resolution of this receiver is specified to be 3 bits.There is a voltage supply of 5V required in order for this transceiver module to be operated.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.IC5V is a high performance driver IC designed to work with a 5V power supply.There are 1 transceivers in total that this module isolated transceiver implements.On the integrator circuit are embedded 3 drivers.Additionally, the optical transceiver module's COMMON I/O; ADDITIONAL COMMON ENABLE INPUT function provides improved signal management accuracy and stability.Using a 90mA input voltage, this integrating circuit is capable of driving LEDs with an output voltage of 20 V. SN75ALS171ADW FeaturesTube package 20 pin count 20 pins 5V power supply SN75ALS171ADW ApplicationsThere are a lot of Texas Instruments SN75ALS171ADW Drivers/Receivers/Transceivers applications. - Ethernet circuitry
- Wired telephone
- Cordless telephone
- Desktop PC
- Notebook
- Pocket PC
- Desktop radio
- Clock radio
- Tuner
- Portable radio
|
|
14915
In-stock
|
Get Quote
|
|
|
Ultralife |
SN75188NSR Overview An excellent driver IC for common LEDs thanks to its enhanced 14-SOIC (0.209, 5.30mm Width) package.Tape & Reel (TR) package is used to mount this receiver.Several solutions have used this Driver can transceiver in a variety of applications due to its Driver IC nature.A Surface Mount-type PCB or development board can be used to place this wide receiver.A differential driver like this uses ±7.5V~15V of power.The field can have up to 4/0 eligible receivers/drivers at once when using this electronic part.IC receiver has been designed primarily for applications operating at 0°C~70°C.There is a voltage range of 9V for this line driver ic, so it can operate efficiently.14 terminations are integrated into this wide receiver for driving and receiving signals from data.There are 14 pinouts available on this transceiver which are market standard.With the part number SN75188 identifying the product type, temperature, package, etc., you can search with it to see more variants.A 14-pin driver IC with enhanced power dissipation control is featured here.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 9V.This electronic part can have?up to 4 eligible drivers on the field at once.?A temperature of at least -9V should be maintained when the line driver ic is in operation.A dual supply voltage arrangement of maximum 15V is included in this integrator circuit.If this can transceiver has a dual supply voltage, you should select a power supply that is suitable for 7.5V outputs.
SN75188NSR Features Tape & Reel (TR) package 14 pin count 14 pins
SN75188NSR Applications There are a lot of Texas Instruments SN75188NSR Drivers/Receivers/Transceivers applications.
- Changeing the frequency from IF to RF
- Sensor reporting
- Wireless transmission
- Gigabit Ethernet
- Servers
- Wired telephone
- Switching system
- Datacom networking applications
- Satellite communication
- Radio transmission
|
|
999
In-stock
|
Get Quote
|
|
|
Ultralife |
<h3>AM26LS31CDR Overview</h3><div><br/>Due to the enhanced 16-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.Tape & Reel (TR) package is used to mount this receiver.Since this is a Driver can transceiver, many solutions can use it for a variety of functions.On any Surface Mount-type PCB or development board, you can install this wide receiver.This differential driver uses 4.75V~5.25V for power supply.Up to 4/0 receivers/drivers can be installed simultaneously on this electronic part.In most applications, this ic receiver is used in environments where 0°C~70°C is the operating temperature.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.For driving and receiving signals from data, this wide receiver has 16 terminations integrated.There are 16 pinouts available on this transceiver which are market standard.For more variants of this part, try searching with the base part number AM26LS31, which indicates the product type, temperature, package, etc.16-pin driver chip with enhanced power dissipation.There is a 5V input voltage supply that can be used to operate this transceiver module.There is one driver IC in this package which is intended to be operated by 5V of power.The integrator circuit is embedded with 4 drivers.In the case of input current exceeding 80mA, this can transceiver may malfunction.<br/><br/></div><h3>AM26LS31CDR Features</h3><div><br/>Tape & Reel (TR) package<br/>16 pin count<br/> 16 pins<br/>5V power supply<br/><br/></div><h3>AM26LS31CDR Applications</h3><div><br/>There are a lot of Texas Instruments AM26LS31CDR Drivers/Receivers/Transceivers applications. <br/><br/></div><ul style="list - style: none; padding: 0; margin: 0; "><li>IP cameras<!--<li--></li><li>Bridges<!--<li--></li><li>Wireless 3D game<!--<li--></li><li>Metro access rings<!--<li--></li><li>LAN, SAN, WAN (local, storage, work area networks)<!--<li--></li><li>Car alarm systems<!--<li--></li><li>Wireless modems<!--<li--></li><li>IPTV front end<!--<li--></li><li>Wireless network systems<!--<li--></li><li>Servers<!--<li--></li></ul> |
|
999
In-stock
|
Get Quote
|
|
|
Klein Tools, Inc. |
ST232ABTR OverviewAn excellent driver IC for common LEDs thanks to its enhanced 16-TSSOP (0.173, 4.40mm Width) package.The Tape & Reel (TR) package houses this receiver.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.A Surface Mount-type PCB or development board can be used to place this wide receiver.Power supply requirements for this differential driver are 4.5V~5.5V.At any one time, this electronic part can have up to 2/2 eligible receivers/drivers.As its name implies, this ic receiver is designed for applications where -40°C~85°C is the operating temperature.An operating voltage range of 5V is suitable for this line driver ic.This wide receiver has 16 terminations for driving and receiving data signals.There are 16 pinouts available on this transceiver which are market standard.Since the part number ST232 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.The driver IC has improved power dissipation control.Its package size is drastically reduced by downsizing ICs and utilizing high-density Surface Mount mounting techniques.In terms of resolution, this ic receiver was capable of providing a 2-bit resolution.There is a 5V input voltage supply that can be used to operate this transceiver module.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 5V-pin power supply.The module isolated transceiver implements a total of 1 transceivers.The module isolated transceivers are 2 receivers. ST232ABTR FeaturesTape & Reel (TR) package 16 pin count 16 pins 5V power supply ST232ABTR ApplicationsThere are a lot of STMicroelectronics ST232ABTR Drivers/Receivers/Transceivers applications. - Remote controls
- Wireless network systems
- Satellite communications networks
- Ethernet circuitry
- Wired telephone
- Cordless telephone
- Desktop PC
- Notebook
- Pocket PC
- Desktop radio
|
|
1244
In-stock
|
Get Quote
|
|
|
Ultralife |
SN75107BDR OverviewThis driver chip is excellent for driving common LEDs due to its enhanced 14-SOIC (0.154, 3.90mm Width) package.The package of this receiver is Cut Tape (CT).It has proved to be a valuable component for a variety of applications since it is a Receiver can transceiver.On any Surface Mount-type PCB or development board, you can install this wide receiver.It takes ±4.75V~5.25V from the power supply to run this differential driver.During operation, this electronic part may have up to 0/2 eligible receivers/drivers.IC receiver is designed for applications with a temperature of 0°C~70°C.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.Wide receiver has 14 terminations built in for driving or receiving signals from data.As a standard package, this transceiver comes with a 14-pin layout that follows the market standard.Since the base part number SN75107 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.14-pin driver IC with improved power dissipation control.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.Additionally, there are 2 receivers included in the package.On the part, 0 drivers are embedded in order to facilitate the operation of the device.ICs with ADDITIONAL COMMON STROBE INPUT functions also improve the overall stability and accuracy of signal management.There is no matter what the input voltage is. The integrating circuit is able to drive LEDs with an input voltage of 30mA.There should be an increase in the line driver ic's operating temperature from -5V.integrator circuits like this one have a maximum dual supply voltage configuration of up to 5.25V.This can transceiver works with dual supply voltage, so you should choose a power supply suitable for 4.75V. SN75107BDR FeaturesCut Tape (CT) package 14 pin count 14 pins SN75107BDR ApplicationsThere are a lot of Texas Instruments SN75107BDR Drivers/Receivers/Transceivers applications. - Cordless telephone
- Desktop PC
- Notebook
- Pocket PC
- Desktop radio
- Clock radio
- Tuner
- Portable radio
- Car radio
- Satellite radio receiver
|
|
7236
In-stock
|
Get Quote
|
|
|
Ultralife |
GD75232DWR OverviewThe enhanced 20-SOIC (0.295, 7.50mm Width) package makes it an excellent LED driver.Tape & Reel (TR) package is used to mount this receiver.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.On any Surface Mount-type PCB or development board, this wide receiver can be placed.This differential driver consumes 5V ±7.5V~15V for its power supplyAs many as 3/5 receivers/drivers are eligible for use on this electronic part.In most applications, this ic receiver is used in environments where 0°C~70°C is the operating temperature.Wide receiver can operate within the range of 5V supply voltages efficiently.This integrated circuit has 20 terminations designed for driving and receiving signals from data.ICs that are packaged with market standard pinouts are available on the market.Since the base part number GD75232 describes the product type, temperature, package, etc., you might get more options by searching with it.Wide receiver with enhanced power dissipation control, 20-pin.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.This IC implements 1 transceivers overall.There are also 5 receivers in it as well.The part is embedded with 3 drivers, so it can be used with 3 devices.In addition, the optical transceiver module's EASY INTERFACE BETWEEN UART, SERIAL-PORT CONNECTOR OF IBM PC/AT function improves signal management accuracy and stability overall.One of the GD series, representing an enhanced power-saving method, is this integrating circuit.It is advisable to maintain a line driver ic's operating temperature above -9V during operation. GD75232DWR FeaturesTape & Reel (TR) package 20 pin count 20 pins GD series GD75232DWR ApplicationsThere are a lot of Texas Instruments GD75232DWR Drivers/Receivers/Transceivers applications. - Desktop PC
- Notebook
- Pocket PC
- Desktop radio
- Clock radio
- Tuner
- Portable radio
- Car radio
- Satellite radio receiver
- Shortwave receiver
|
|
2
In-stock
|
Get Quote
|
|
|
Ultralife |
GD65232PWR OverviewLED drivers benefit from this IC's enhanced 20-TSSOP (0.173, 4.40mm Width) package.The Tape & Reel (TR) package contains this receiver.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.Any Surface Mount-type PCB or development board can be used with this wide receiver.This differential driver requires a 5V ±7.5V~15V power supply.At any given time, there can be up to 3/5 eligible receivers/drivers for this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~85°C.5V is the supply voltage range that this line driver ic can efficiently operate with.In this wide receiver, 20 terminations are integrated for driving and receiving signals from data.Transceiver comes with 20 standard pinouts that meet the market's requirements.For more variants of this part, try searching with the base part number GD65232, which indicates the product type, temperature, package, etc.An enhanced power dissipation control driver IC featuring 20 pins.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Surface Mount mounting techniques.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.ICs implement a total of 1 transceivers.There are 5 receivers inside.The integrator circuit comes with embedded 3 drivers.In addition, the optical transceiver module incorporates a EASY INTERFACE BETWEEN UART, SERIAL-PORT CONNECTOR OF IBM PC/AT function that improves the overall stability and accuracy of the signal management.Integrating circuits from the GD series are power-saving integrating circuits.Ideally, the operating temperature of line driver ic should be kept at or above -9V. GD65232PWR FeaturesTape & Reel (TR) package 20 pin count 20 pins GD series GD65232PWR ApplicationsThere are a lot of Texas Instruments GD65232PWR Drivers/Receivers/Transceivers applications. - Satellite communications networks
- Ethernet circuitry
- Wired telephone
- Cordless telephone
- Desktop PC
- Notebook
- Pocket PC
- Desktop radio
- Clock radio
- Tuner
|
|
1886
In-stock
|
Get Quote
|
|
|
Cherry Americas LLC |
TLE7259GNT OverviewAn excellent driver IC for common LEDs thanks to its enhanced 8-SOIC (0.154, 3.90mm Width) package.The Tape & Reel (TR) package houses this receiver.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.A Surface Mount-type PCB or development board can be used to place this wide receiver.Power supply requirements for this differential driver are 7V~27V.At any one time, this electronic part can have up to 1/1 eligible receivers/drivers.As its name implies, this ic receiver is designed for applications where -40°C~150°C is the operating temperature.This wide receiver has 8 terminations for driving and receiving data signals.There are 8 pinouts available on this transceiver which are market standard.Since the part number TLE7259 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.The driver IC has improved power dissipation control.Its package size is drastically reduced by downsizing ICs and utilizing high-density Surface Mount mounting techniques.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.There are typically 1 bits of resolution specified in the specifications of this receiver. TLE7259GNT FeaturesTape & Reel (TR) package 8 pin count 8 pins TLE7259GNT ApplicationsThere are a lot of Infineon Technologies TLE7259GNT Drivers/Receivers/Transceivers applications. - Remote controls
- Wireless network systems
- Satellite communications networks
- Ethernet circuitry
- Wired telephone
- Cordless telephone
- Desktop PC
- Notebook
- Pocket PC
- Desktop radio
|
|
999
In-stock
|
Get Quote
|
|
|
APS |
MCP2544FDT-H/MNY OverviewLED drivers benefit from this IC's enhanced 8-WFDFN Exposed Pad package.The Tape & Reel (TR) package contains this receiver.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.Any Surface Mount-type PCB or development board can be used with this wide receiver.This differential driver requires a 4.5V~5.5V power supply.At any given time, there can be up to 1/1 eligible receivers/drivers for this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~150°C.5V is the supply voltage range that this line driver ic can efficiently operate with.In this wide receiver, 8 terminations are integrated for driving and receiving signals from data.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Surface Mount mounting techniques. MCP2544FDT-H/MNY FeaturesTape & Reel (TR) package MCP2544FDT-H/MNY ApplicationsThere are a lot of Microchip Technology MCP2544FDT-H/MNY Drivers/Receivers/Transceivers applications. - Satellite communications networks
- Ethernet circuitry
- Wired telephone
- Cordless telephone
- Desktop PC
- Notebook
- Pocket PC
- Desktop radio
- Clock radio
- Tuner
|
|
47723
In-stock
|
Get Quote
|
|
|
APS |
MCP2544FDT-H/MF OverviewThe enhanced 8-VDFN Exposed Pad package makes it an excellent LED driver.Tape & Reel (TR) package is used to mount this receiver.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.On any Surface Mount-type PCB or development board, this wide receiver can be placed.This differential driver consumes 4.5V~5.5V for its power supplyAs many as 1/1 receivers/drivers are eligible for use on this electronic part.In most applications, this ic receiver is used in environments where -40°C~150°C is the operating temperature.Wide receiver can operate within the range of 5V supply voltages efficiently.This integrated circuit has 8 terminations designed for driving and receiving signals from data.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays. MCP2544FDT-H/MF FeaturesTape & Reel (TR) package MCP2544FDT-H/MF ApplicationsThere are a lot of Microchip Technology MCP2544FDT-H/MF Drivers/Receivers/Transceivers applications. - Desktop PC
- Notebook
- Pocket PC
- Desktop radio
- Clock radio
- Tuner
- Portable radio
- Car radio
- Satellite radio receiver
- Shortwave receiver
|
|
17404
In-stock
|
Get Quote
|
|
|
Klein Tools, Inc. |
ST202ECDR OverviewThis LED driver IC features an enhanced 16-SOIC (0.154, 3.90mm Width) package for driving common LEDs.The receiver is packaged in a Tape & Reel (TR) package.As a Transceiver can transceiver, this part has enabled many applications to be served.This wide receiver can be placed on any Surface Mount-type PCB or development board.This differential driver uses 4.5V~5.5V for power supply.There can be up to 2/2 eligible receivers/drivers on the field at the same time with this electronic part.IC receiver has been designed primarily for applications operating at 0°C~70°C.With a supply voltage range of 5V, this line driver ic operates efficiently.16 terminations are integrated into this wide receiver for driving and receiving signals from data.It is packaged with 16 pinouts that are market standard for this particular transceiver.The base part number ST202 identifies the product type, temperature, package, etc., so you can search for more variants by using it.A 16-pin driver IC with enhanced power dissipation control is featured here.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.Using this ic receiver, you were able to achieve a resolution of 2 bits.An input voltage supply of 5V is required to operate the transceiver module.The driver IC in this product is designed so that it can be powered by 5V.There are 1 transceivers implemented in this module isolated transceiver.In module isolated transceiver are 2 receivers. ST202ECDR FeaturesTape & Reel (TR) package 16 pin count 16 pins 5V power supply ST202ECDR ApplicationsThere are a lot of STMicroelectronics ST202ECDR Drivers/Receivers/Transceivers applications. - Cell phones
- Wireless modems
- Remote controls
- Wireless network systems
- Satellite communications networks
- Ethernet circuitry
- Wired telephone
- Cordless telephone
- Desktop PC
- Notebook
|
|
5407
In-stock
|
Get Quote
|
|
|
Klein Tools, Inc. |
ST232BDR Overview Due to the enhanced 16-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.The Tape & Reel (TR) package houses this receiver.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.A Surface Mount-type PCB or development board can be used to place this wide receiver.It takes 4.5V~5.5V from the power supply to run this differential driver.At any given time, there can be up to 2/2 eligible receivers/drivers for this electronic part.In most applications, this ic receiver is used in environments where -40°C~85°C is the operating temperature.An output voltage range of 5V is sufficient to run this line driver ic efficiently.This wide receiver has 16 terminations for driving and receiving data signals.A package consisting of 16 market standard pinouts is provided with this integrated circuit.Since the base part number ST232 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.The driver IC has improved power dissipation control.As a result of optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size has been greatly reduced.As a result of the ic receiver, the resolution of the driver was increased to 2 bits.This transceiver module is designed to operate from an input voltage supply of 5V.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.It implements 1 transceivers in total.In addition to that, it contains 2 receivers as well.A can transceiver that has a current input of 10mA or greater may be affected by malfunctions.
ST232BDR Features Tape & Reel (TR) package 16 pin count 16 pins 5V power supply
ST232BDR Applications There are a lot of STMicroelectronics ST232BDR Drivers/Receivers/Transceivers applications.
- Radio transmission
- Routers
- Portable radio
- transmission relay
- Metro access rings
- AV receiver
- Gigabit Ethernet
- Wireless multimedia center in smart home
- Switching system
- Bar, KTV wireless entertainment
|
|
999
In-stock
|
Get Quote
|
|
|
Ultralife |
DSLVDS1047PWR OverviewDriver ICs with enhanced 16-TSSOP (0.173, 4.40mm Width) packages are excellent for driving LEDs with common characteristics.In the Tape & Reel (TR) package, this receiver is mounted.With its Driver can transceiver design, this part can be incorporated into a wide range of solutions.The wide receiver can be mounted on any Surface Mount-type PCB or development board.In terms of power supply, this differential driver utilizes 3V~3.6V.As many as 4/0 eligible receivers/drivers can be used simultaneously with this electronic part.Applications with operating temperatures of -40°C~85°C TA have been designed primarily for this ic receiver.There is a voltage range of 3.3V for this line driver ic, so it can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.DSLVDS1047 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.As a result of the ic receiver, the resolution of the driver was increased to 4 bits. DSLVDS1047PWR FeaturesTape & Reel (TR) package DSLVDS1047PWR ApplicationsThere are a lot of Texas Instruments DSLVDS1047PWR Drivers/Receivers/Transceivers applications. - Wireless network systems
- Satellite communications networks
- Ethernet circuitry
- Wired telephone
- Cordless telephone
- Desktop PC
- Notebook
- Pocket PC
- Desktop radio
- Clock radio
|
|
7455
In-stock
|
Get Quote
|
|
|
APS |
MCP2003BT-E/MC OverviewLED drivers with the enhanced 8-VFDFN Exposed Pad package will be able to drive a variety of common LEDs with ease.In this package, the receiver is mounted in the Tape & Reel (TR) format.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.Power supply for this differential driver is 5.5V~30V.It is possible to have up to 1/1 receivers/drivers in use simultaneously with this electronic part.The operating temperature of this ic receiver is -40°C~125°C. It is primarily designed for applications with low temperatures.Driver ICs with a supply voltage range of 12V can operate efficiently.Integrated into this wide receiver are 8 terminations that are used for driving and receiving signals from data.With the part number MCP2003 identifying the product type, temperature, package, etc., you can search with it to see more variants.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.There is a capability of 1-bit resolution with this ic receiver.Typically, the resolution of this receiver is specified to be 1 bits. MCP2003BT-E/MC FeaturesTape & Reel (TR) package MCP2003BT-E/MC ApplicationsThere are a lot of Microchip Technology MCP2003BT-E/MC Drivers/Receivers/Transceivers applications. - Ethernet circuitry
- Wired telephone
- Cordless telephone
- Desktop PC
- Notebook
- Pocket PC
- Desktop radio
- Clock radio
- Tuner
- Portable radio
|
|
3174
In-stock
|
Get Quote
|
|
|
Ultralife |
SN75C188DR OverviewDesigned for common LEDs, this driver IC features an enhanced 14-SOIC (0.154, 3.90mm Width) package.There is a Cut Tape (CT) package for this receiver.The Driver can transceiver type enables this part to be used in a wide range of applications.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.A differential driver like this uses ±4.5V~15V of power.The field can have up to 4/0 eligible receivers/drivers at once when using this electronic part.IC receiver's like this are designed for applications requiring a 0°C~70°C operating temperature.An output voltage range of 12V is sufficient to run this line driver ic efficiently.There are 14 terminations in this wide receiver so that signals can be driven from the data and received.The transceiver is packaged with 14 market standard pinouts so that it can be easily used.You can search with 75C188 to get more variants of this part, since it identifies the product type, temperature, package, etc.14-pin driver chip with enhanced power dissipation.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.There are two types of input voltage supply available for this IC, 12V.Embedded 4 drivers are included on the integrator circuit.In the event that the input current reaches or exceeds 160μA, the can transceiver may malfunction.You should keep the temperature of the line driver ic above -12V during operation.It includes a dual supply voltage arrangement of 15V maximum that can be applied to this integrator circuit.If you are considering to use a power supply for this can transceiver, you'd better choose one with a 4.5V output voltage since the can transceiver operates with dual supply voltages. SN75C188DR FeaturesCut Tape (CT) package 14 pin count 14 pins SN75C188DR ApplicationsThere are a lot of Texas Instruments SN75C188DR Drivers/Receivers/Transceivers applications. - Wired telephone
- Cordless telephone
- Desktop PC
- Notebook
- Pocket PC
- Desktop radio
- Clock radio
- Tuner
- Portable radio
- Car radio
|
|
6850
In-stock
|
Get Quote
|