Shine Ever will be exhibiting at ELECTRONICA in Munich Nov 12-15, 2024! COME VISIT US AT BOOTH 118/2, Hall C5
My CartProximity/Occupancy Sensors Finished Units(6976)
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
| Ultralife | TL594IPWR OverviewWith a 16-TSSOP (0.173, 4.40mm Width) package, the switching controller is suitable for a wide range of applications. It is sufficient to generate 2 outputs with this dc motor controller. PMIC is packaged in a solid enclosure of Cut Tape (CT). Transistor Driver dc switching's outputs (s) can be handled by it. This dc control has a supply voltage and operating voltage of 7V~40V. Suitable for working in an dc switcher that has a -40°C~85°C TA. With this switching controller, you can switch at 1kHz~300kHz. dc dc regulator is made easier with Surface Mount. To ensure efficient switching, this dcdc regulator features a Dead Time Control, Frequency Control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. An array of 16 terminations of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input is 15V. Other relevant dc to dc converter ics will be returned if you search "TL594". 16 pins are present on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. An input voltage of 7V is the minimum required for the dc dc voltage regulator. Statistically, DC regulator outputs 40V volts. In most cases, the dc dc regulator's output current is 200mA. This information should be noted when you begin working with the component. A duty cycle set at 45 % ensures voltage regulator dc to dc reliability during power-on and power-off. There is 300kHz frequency setting on the switching controller. In a dormant state, the dc switching uses 12.4mA. Switching controller is necessary to supply a voltage of 15V. TL594IPWR FeaturesTransistor Driver Outputs Switching Frequency: 1kHz~300kHz Dead Time Control, Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 45 % Frequency: 300kHz TL594IPWR ApplicationsThere are a lot of Texas Instruments TL594IPWR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | LM25118MH/NOPB OverviewThis switching controller fits most application requirements since it is packaged in a 20-PowerTSSOP (0.173, 4.40mm Width) package. There is a Tube solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. 3V~42V is the operating voltage and supply voltage of the dc control. A -40°C~125°C TJ dc switcher is not a problem. Using this switching controller, it is possible to switch at Up to 500kHz. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Frequency Control, Ramp, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of dc switching's functions can be performed on 20 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input is 24V. Search for "LM25118" to find other relevant dc to dc converter ics. In total, switching converter has 20 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. As determined by the test statistics, the output voltage of DC regulator is 38V. normally, the dc dc regulator's output current is 3.5A, which you should keep in mind when starting a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 75 %. DC switcher's Surface Mount qualifies it for most applications and prototypes. DC regulator has a maximum frequency of 575kHz. As long as the dc switching is in a dormant state, it utilizes 4.5mA. Because the dc switcher's maximum input voltage is 42V users must limit the voltage accordingly. A voltage of 3V is required for the supply. Input current cannot exceed 4A with this dc switcher. A datasheet states that the switching converter can output 38V volts at its maximum. The supply current of the voltage controller is 4.5mA. Neither the voltage controller's lowest voltage output 1.23Vr its highest voltage output is less than 1.23V. Switches with 1 phases are used in this controller. LM25118MH/NOPB FeaturesTransistor Driver Outputs Switching Frequency: Up to 500kHz Enable, Frequency Control, Ramp, Soft Start PULSE WIDTH MODULATION Max Duty Cycle: 75 % LM25118MH/NOPB ApplicationsThere are a lot of Texas Instruments LM25118MH/NOPB DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | UC2825ADW OverviewCapsuled in the 16-SOIC (0.295, 7.50mm Width) package, the switching controller suits most application needs. 2 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. With this function, you can deal with Transistor Driver dc switching's outputs (s). 8.4V~22V is the operating voltage and supply voltage of the dc control. Qualified to work in an dc switcher with -40°C~85°C TA. The switching controller can be switched at 400kHz~1MHz. It is suitable for general dc dc regulator when it is set to Surface Mount. To provide efficient switching control, Current Limit, Frequency Control, Ramp, Soft Start is included in the dcdc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Terminal (s) of the switching converters are designed at the DUAL position. 16 terminations with a variety of function. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input of 12V. UC2825 can be used to locate other relevant dc to dc converter ics. Pins number 16 of switching converter in total. There is a particular type of Switching Regulator or Controllers in switching converter. Input voltage of dc dc voltage regulator must be 8.8V. DC regulator outputs 2V voltage based on test statistics. normally, the dc dc regulator's output current is 500mA, which you should keep in mind when starting a project. The duty cycle of the voltage regulator dc to dc can be set to 50 % on power-up or power-down to ensure reliability. Switching controller operates at a frequency of 1MHz. The value of DC to DC voltage regulator is set to CAN ALSO BE CONFIGURED IN CURRENT MODE in order to better satisfy the requirement. Switching controller is necessary to supply a voltage of 12V. 36mA more than 36mA current should be supplied to the controller. 28mA current flow input could satisfy the switching converter for operation. UC2825ADW FeaturesTransistor Driver Outputs Switching Frequency: 400kHz~1MHz Current Limit, Frequency Control, Ramp, Soft Start PULSE WIDTH MODULATION Max Duty Cycle: 50 % Frequency: 1MHz CAN ALSO BE CONFIGURED IN CURRENT MODE UC2825ADW ApplicationsThere are a lot of Texas Instruments UC2825ADW DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | UCC2813QDR-1Q1 OverviewCapsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. dc motor controller is suitable for 1 output generation. An enclosure of Tape & Reel (TR) is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 7.4V~12V. Suitable for a -40°C~125°C TJ dc switcher. dc dc regulator is made easier with Surface Mount. In order to control switching efficiently, the dcdc regulator features Frequency Control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. Different dc switching's functions can be applied to 8 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 10V is input. Searching "UCC2813" will return other relevant dc to dc converter ics. Total pins of switching converter are 8. The type is a particular Switching Regulator or Controllers of switching converter. Test statistics indicate DC regulator outputs 400mV voltage. normally, the dc dc regulator's output current is 200mA, which you should keep in mind when starting a project. The duty cycle of the voltage regulator dc to dc can be set to 50 % on power-up or power-down to ensure reliability. Switching controller operates at 1MHz Hz. The dc to dc voltage regulator belongs to the Automotive, AEC-Q100 series. For nominal working status, the input voltage can be set as 48V. The nominal current supply of this the controllers dc is 500μA. At 1MHz, this controller will mostly work as expected. UCC2813QDR-1Q1 FeaturesTransistor Driver Outputs Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 50 % Frequency: 1MHz Switching Frequency: 1MHz UCC2813QDR-1Q1 ApplicationsThere are a lot of Texas Instruments UCC2813QDR-1Q1 DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | LM3475MFX/NOPB OverviewWith a SC-74A, SOT-753 package, the switching controller is suitable for a wide range of applications. 1 outputs can be generated with the dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control operates at 2.7V~10V and has a 2.7V~10V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. A generalization of dc dc regulator can be made using Surface Mount. To provide efficient switching control, Enable is included in the dcdc regulator. Connected to a SWITCHING REGULATOR analog IC, the switch converters are connected to a power supply. The switching converters's terminals (s) are designed at DUAL. 5 terminations with a variety of function. It includes HYSTERETIC CURRENT MODE as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis set to 5V. Searching "LM3475" will return other relevant dc to dc converter ics. In total, switching converter has 5 pins. The type is a particular Switching Regulator or Controllers of switching converter. It is recommended that the dc dc voltage regulator's minimum input voltage be 2.7V. As determined by the test statistics, the output voltage of DC regulator is 10V. In most cases, the output current of the dc dc regulator will be 5A, so note that when you start the project. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. The max frequency of the pmic can reach 2MHz. Users should apply 10V to operate the voltage regulator dc to dc safely and reliably. In a dormant state, the dc switching uses 260μA. This controller performs best at a frequency of 2MHz. LM3475MFX/NOPB FeaturesTransistor Driver Outputs Enable HYSTERETIC CURRENT MODE Switching Frequency: 2MHz LM3475MFX/NOPB ApplicationsThere are a lot of Texas Instruments LM3475MFX/NOPB DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | UC2845AQDR OverviewCapsuled in the 14-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. An enclosure of Cut Tape (CT) is used to package the PMIC. A total of Transistor Driver dc switching's outputs can be handled by it. 7.6V~30V is the supply voltage and the operating voltage of the dc control. A -40°C~125°C TJ dc switcher is not a problem. dc dc regulators can be carried out with Surface Mount. Frequency Control is used for efficient switching control in the dcdc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Thare switching converters has a terminal (s) at DUAL . A variety of dc switching's functions can be performed on 14 terminations. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. In addition to "UC2845", there are other relevant dc to dc converter ics you can find. In total, switching converter has 14 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 15V voltage according to the test statistics. The dc to dc regulator is limited to 25V input voltage. You should note down the dc dc regulator's usual output current of 200mA when you start a project. The duty cycle of the voltage regulator dc to dc can be set to 50 % on power-up or power-down to ensure reliability. Switching controllers work at 500kHz Hz. It belongs to the dc to dc voltage regulator series Automotive, AEC-Q100. In a dormant state, the dc switching uses 11mA. UC2845AQDR FeaturesTransistor Driver Outputs Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 50 % Frequency: 500kHz UC2845AQDR ApplicationsThere are a lot of Texas Instruments UC2845AQDR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | UCC25630-3DDBR OverviewThis switching controller fits most application requirements since it is packaged in a 16-SOIC (0.154, 3.90mm Width), 14 Leads package. There is sufficient capacity to generate switching controller for outputs 1. Tape & Reel (TR) solid enclosure protects the pmic. The system can process Transistor Driver dc switching's outputs (s). dc controls with 11.25V~26V voltage are supplied and operated. Work well in dc switchers with a -40°C~125°C TJ. The switching controller is capable of switching at the 35kHz~1MHz position. dc dc regulator is made easier with Surface Mount. For efficient switching control, the dcdc regulator features Hybrid Hysteretic Control (HHC). An analog IC with the POWER FACTOR CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of terminations with 14 of dc switching. A few of the control techniques these dc dc converter ics adapt include HYSTERETIC CURRENT MODE. A DC switcher's nominal voltage of 15V is input. Search for "UCC25630" to find other relevant dc to dc converter ics. In total, switching converter has 14 pins. The dc to dc regulator is limited to 26V input voltage. 1 functions (s) are included in the switch converters. Voltage 15V is required for supply. UCC25630-3DDBR FeaturesTransistor Driver Outputs Switching Frequency: 35kHz~1MHz Hybrid Hysteretic Control (HHC) HYSTERETIC CURRENT MODE UCC25630-3DDBR ApplicationsThere are a lot of Texas Instruments UCC25630-3DDBR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TL1451ACNSR OverviewIt comes in a 16-SOIC (0.209, 5.30mm Width) package, so switching controller can be used for most applications. 2 outputs are supported by the dc motor controller. There is a Tape & Reel (TR) solid enclosure around the pmic. The program can handle Transistor Driver dc switching's outputs (s). dc controls with 3.6V~50V voltage are supplied and operated. Worked in an dc switcher with a -20°C~85°C TA rating. With this switching controller, you can switch at 1kHz~500kHz. The Surface Mount value makes it suitable for general dc dc regulator. Switching control is made easier with the dcdc regulator's Frequency Control. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. Switching converters are designed with the terminal (s) at position DUAL . There are many different types of terminations for 16. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input is 6V. Search for "TL1451" to find other relevant dc to dc converter ics. Pins number 16 of switching converter in total. Specially, switching converter corresponds to type Switching Regulator or Controllers. Statistically, DC regulator outputs 50V volts. You should note down the dc dc regulator's usual output current of 3A when you start a project. Switching controllers work at 500kHz Hz. Users should apply 50V to operate the voltage regulator dc to dc safely and reliably. DC switching uses 1.7mA when it is dormant. Since the dc switcher's maximum input voltage is 50V, the voltage must be regulated accordingly. This voltage controller requires a supply voltage of 6V. There must be a 3.6V supply voltage. There will be 3A output current greater than 3A from the dc switcher. Its datasheet indicates the switching converter can output a maximum of 50V volts. 1V voltage output is lower than 1V. TL1451ACNSR FeaturesTransistor Driver Outputs Switching Frequency: 1kHz~500kHz Frequency Control PULSE WIDTH MODULATION Frequency: 500kHz TL1451ACNSR ApplicationsThere are a lot of Texas Instruments TL1451ACNSR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | TL1451ACDBR OverviewIt comes in the 16-SSOP (0.209, 5.30mm Width) package, which makes switching controller suitable for most applications. It is sufficient to generate 2 outputs with this dc motor controller. PMIC packaging is solid with a Cut Tape (CT) enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's3.6V~50V is the operating voltage and supply voltage of the dc control. Worked in an dc switcher with a -20°C~85°C TA rating. In this switching controller, the switch can be set to 1kHz~500kHz. dc dc regulator is made easier with Surface Mount. DCDC regulator is controlled efficiently by Frequency Control. An analog IC with the DUAL SWITCHING CONTROLLER signal is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of terminations with 16 of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 6V. You can find other relevant dc to dc converter ics by searching "TL1451". In total, switching converter has 16 pins. There is a particular type of Switching Regulator or Controllers in switching converter. Statistically, the DC regulator outputs 50V voltage. It's important to remember that the dc dc regulator's normaloutput current is 3A, so you should note it down when starting a new project. A frequency of 500kHz is used by the switching controller. It is suggested that users apply 50V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. DC switchings that are dormant use 1.7mA. The maximum input voltage of dc switcher is 50V, so users should limit their voltage accordingly. Switching controller is necessary to supply a voltage of 6V. Voltage 3.6V is necessary for the supply. There will be 3A current output from the dc switcher above 3A. The switching converter can output 50V volts at its utmost, according to the datasheet. At its lowest voltage, the voltage controller does not produce less than 1V. TL1451ACDBR FeaturesTransistor Driver Outputs Switching Frequency: 1kHz~500kHz Frequency Control PULSE WIDTH MODULATION Frequency: 500kHz TL1451ACDBR ApplicationsThere are a lot of Texas Instruments TL1451ACDBR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
| APS | MIC38C45YM-TR OverviewCapsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. The dc motor controller is adquate to generate for 1 outputs. The pmic is packaged in Tape & Reel (TR) solid enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. The supply and operating voltage of the dc control are 7.6V~20V. Worked in a -40°C~85°C TA dc switcher before. There is a switch at 500kHz that can be used with this controller. The Surface Mount makes it ideal for general dc dc regulator. To provide efficient switching control, Frequency Control is included in the dcdc regulator. Other relevant dc to dc converter ics can be found by searching "MIC38C45". 8 pins are on switching converter. Test statistics indicate DC regulator outputs 5V voltage. You should note down the dc dc regulator's usual output current of 500A when you start a project. voltage regulator dc to dcs with a 50 % duty cycle are designed to be reliable when powered on and powered off. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. DC regulator's maximum frequency is 500kHz. A frequency of 500kHz is used by the switching controller. At least -40°C°C is recommended. The temperature should not exceed 85°C degrees Celsius. There is 8-SOIC dc dc controller package associated with this part. Switches with 1 phases are used in this controller. When it comes to maximum supply voltage, switching voltage regulators is rated 20V. In the presence of a current greater than 6mA, the component may fail to operate properly and may be damaged. MIC38C45YM-TR FeaturesTransistor Driver Outputs Switching Frequency: 500kHz Frequency Control Max Duty Cycle: 50 % Frequency: 500kHz MIC38C45YM-TR ApplicationsThere are a lot of Microchip Technology MIC38C45YM-TR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | LM3485Q1MM/NOPB OverviewAs a result of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) compact design, the switching controller is compatible with most applications. For 1 outputs, the dc motor controller is appropriate. PMIC is packaged in a solid enclosure of Tape & Reel (TR). There are Transistor Driver dc switching's output (s) that it can handle. dc controls with 4.5V~35V voltage are supplied and operated. Qualified to work in an dc switcher with -40°C~125°C TJ. It is suitable for general dc dc regulator when it is set to Surface Mount. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. DUAL are the position of the terminal of the switching converters. A variety of terminations with 8 of dc switching. The control methods that these dc dc converter ics use include HYSTERETIC CURRENT MODE. A DC switcher's nominal voltage of 12V is input. In addition to "LM3485", there are other relevant dc to dc converter ics you can find. Pins number 8 of switching converter in total. It is recommended that the input voltage of the dc dc voltage regulator be 4.5V. Test statistics indicate DC regulator outputs 35V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 4A. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. This dc regulatorhas a max frequency of 1MHz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 35V. It belongs to the Automotive, AEC-Q100 series of dc to dc voltage regulator. DC switching uses 250μA when it is dormant. LM3485Q1MM/NOPB FeaturesTransistor Driver Outputs HYSTERETIC CURRENT MODE Max Duty Cycle: 100 % LM3485Q1MM/NOPB ApplicationsThere are a lot of Texas Instruments LM3485Q1MM/NOPB DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | UCC28C44QDRQ1 OverviewWith a 8-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. dc motor controller is suitable for 1 output generation. PMIC is packaged in a solid enclosure of Tape & Reel (TR). With Transistor Driver dc switching's output (s), it is able to handle it. DC control operates at 9V~18V volts and has 9V~18V supply voltage. Worked in an dc switcher with a -40°C~125°C TA rating. There is a switch at Up to 1MHz that can be used with this controller. In order to control switching efficiently, the dcdc regulator features Frequency Control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminal (s) are designed at DUAL . A variety of 8 terminations are available in dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. UCC28C44 can be used to locate other relevant dc to dc converter ics. Pins number 8 of switching converter in total. Switching converter outputs current to the greatest value of 1A. The dc to dc voltage regulator belongs to the Automotive, AEC-Q100 series. UCC28C44QDRQ1 FeaturesTransistor Driver Outputs Switching Frequency: Up to 1MHz Frequency Control PULSE WIDTH MODULATION UCC28C44QDRQ1 ApplicationsThere are a lot of Texas Instruments UCC28C44QDRQ1 DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | <h3>UCC28C45QDRQ1 Overview</h3><div><br/>This switching controller fits most application requirements since it is packaged in a 8-SOIC (0.154, 3.90mm Width) package. This dc motor controller can be used to generate outputs with 1 numbers. Tape & Reel (TR) solid enclosure protects the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. 7.6V~18V is the supply voltage and the operating voltage of the dc control. Suitable for work in a -40°C~125°C TA dc switcher. This switching controller can switch at Up to 1MHz. dc dc regulator can be generalized using Surface Mount. To ensure efficient switching, this dcdc regulator features a Frequency Control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. DUAL are the position of the terminal of the switching converters. Various 8 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. Search for "UCC28C45" to find other relevant dc to dc converter ics. 8 pins are on switching converter. Switching converter is a special type of Switching Regulator or Controllers. As a result, switching converter outputs current to the greatest value possible (1A). Automotive, AEC-Q100 series dc to dc voltage regulator belong to this series. <br/><br/></div><h3>UCC28C45QDRQ1 Features</h3><div><br/>Transistor Driver Outputs<br/>Switching Frequency: Up to 1MHz<br/>Frequency Control<br/>PULSE WIDTH MODULATION<br/><br/></div><h3>UCC28C45QDRQ1 Applications</h3><div><br/>There are a lot of Texas Instruments UCC28C45QDRQ1 DC to DC converter applications. <br/><br/></div><ul style="list - style: none; padding: 0; margin: 0; "><li>Computer-related products<!--<li--></li><li>ATMs<!--<li--></li><li>Communication system<!--<li--></li><li>Constant current circuits<!--<li--></li><li>Television equipment<!--<li--></li><li>Textile machinery<!--<li--></li><li>Electrical distribution systems<!--<li--></li><li>Program control systems<!--<li--></li><li>Digital precision reference circuits<!--<li--></li><li>Automatic plug-in machines<!--<li--></li></ul> |
999
In-stock
|
Get Quote | |||
| Ultralife | TL1451CNSR OverviewWith a 16-SOIC (0.209, 5.30mm Width) package, the switching controller is suitable for a wide range of applications. It is sufficient to generate 2 outputs with this dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). It is capable of handling Transistor Driver dc switching's outputs (s). dc controls with 3.6V~50V voltage are supplied and operated. Workable in an dc switcher where -20°C~85°C TA is the -20°C~85°C TArm. Switching can be done at 1kHz~500kHz with this switching controller. As it has a Surface Mount value, it can be used for general dc dc regulator. The dcdc regulator features Frequency Control for efficient switching control. The switch converters are connected to an analog IC with a DUAL SWITCHING CONTROLLER output. DUAL are the position of the terminal of the switching converters. Various 16 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. 6V nominal DC switcher's voltage input. A search for "TL1451" will reveal other relevant dc to dc converter ics. 16 pins are on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 2.5V voltage based on test statistics. It should be noted that the dc to dc regulator only accepts 50V voltage as input voltage. The dc dc regulator's usual output current is 20mA, which should be noted down when you start a project. DC regulators have a maximum frequency of 500kHz. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 6V. There must be a voltage supply of 6V volts. 1.7mA volts is the supply current. TL1451CNSR FeaturesTransistor Driver Outputs Switching Frequency: 1kHz~500kHz Frequency Control PULSE WIDTH MODULATION TL1451CNSR ApplicationsThere are a lot of Texas Instruments TL1451CNSR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | LM51551DSSR OverviewIt comes in a 12-WFDFN Exposed Pad package, so switching controller can be used for most applications. For outputs of 1, this dc motor controller is suitable. Tape & Reel (TR) solid enclosure protects the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. Voltages 2.97V~45V are the dc control's supply voltage and operating voltage, respectively. Worked in a -40°C~125°C TJ dc switcher before. In this switching controller, the switch can be set to 100kHz~2.2MHz. Switching control is made easier with the dcdc regulator's Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. There are a DUAL terminal on the switching converters. 12 terminations with a variety of function. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. Other relevant dc to dc converter ics will be returned if you search "LM51551". dc dc voltage regulators should have a minimum input voltage of 2.97V. Voltages 45V are the maximum that the dc to dc regulator will accept. LM51551DSSR FeaturesTransistor Driver Outputs Switching Frequency: 100kHz~2.2MHz Soft Start PULSE WIDTH MODULATION LM51551DSSR ApplicationsThere are a lot of Texas Instruments LM51551DSSR DC to DC converter applications.
|
2532
In-stock
|
Get Quote | |||
| Ultralife | UC3525ADWTR OverviewThis switching controller fits most application requirements since it is packaged in a 16-SOIC (0.295, 7.50mm Width) package. This dc motor controller can be used to generate outputs with 2 numbers. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. A total of Transistor Driver dc switching's outputs can be handled by it. The supply and operating voltage of the dc control are 8V~35V. Worked in an dc switcher with a 0°C~70°C TA rating. The switching controller can be switched at 100Hz~400kHz. The Surface Mount allows it to be used for dc dc regulator in general. To ensure efficient switching, this dcdc regulator features a Enable, Frequency Control, Soft Start. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. There are many different types of terminations for 16. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 20V. Other relevant dc to dc converter ics can be found by searching "UC3525". Switching converter has a total of 16 pins. Switching converter is a type of Switching Regulator or Controllers in particular. According to the test statistics, DC regulator outputs 18V voltage. You should note that the dc dc regulator's usual output current is 100mA. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 49 %. Switching controller operates at a frequency of 450kHz. It is possible to set the input voltage as 35V for nominal working statuses. UC3525ADWTR FeaturesTransistor Driver Outputs Switching Frequency: 100Hz~400kHz Enable, Frequency Control, Soft Start PULSE WIDTH MODULATION Max Duty Cycle: 49 % Frequency: 450kHz UC3525ADWTR ApplicationsThere are a lot of Texas Instruments UC3525ADWTR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife |
16896
In-stock
|
Get Quote | ||||
| Ultralife | LM5033MMX/NOPB OverviewThe switching controller fits in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package and is ideal for most applications. This dc motor controller can be used to generate outputs with 2 numbers. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With PWM Signal dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 15V~90V. Qualified to work in an dc switcher with -40°C~125°C TJ. In this switching controller, the switch can be set to 200kHz 600kHz. A generalization of dc dc regulator can be made using Surface Mount. To provide efficient switching control, Frequency Control, Soft Start is included in the dcdc regulator. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Switching converters are designed with the terminal (s) at position DUAL . An array of 10 terminations of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis set to 48V. LM5033 can be searched for other relevant dc to dc converter ics. Switching converter has a total of 10 pins. Switching converter is a type of Switching Regulator or Controllers in particular. It should be noted that the dc to dc regulator only accepts 90V voltage as input voltage. The dc dc regulator's usual output current is 1.5A, which should be noted down when you start a project. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. This dc regulatorhas a max frequency of 1MHz. Users should apply 9.6V to operate the voltage regulator dc to dc safely and reliably. LM5033MMX/NOPB FeaturesPWM Signal Outputs Switching Frequency: 200kHz 600kHz Frequency Control, Soft Start PULSE WIDTH MODULATION LM5033MMX/NOPB ApplicationsThere are a lot of Texas Instruments LM5033MMX/NOPB DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
| APS | MIC2196YM-TR OverviewThe switching controller fits in the 8-SOIC (0.154, 3.90mm Width) package and is ideal for most applications. For 1 outputs, the dc motor controller is appropriate. The pmic is packaged in Tape & Reel (TR) solid enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sdc controls with 2.9V~14V voltage are supplied and operated. Qualified to work in an dc switcher with -40°C~125°C TJ. It can switch at 400kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Enable. Other relevant dc to dc converter ics will be returned if you search "MIC2196". The switching converter has a total of 8 pins. A duty cycle set at 85 % ensures voltage regulator dc to dc reliability during power-on and power-off. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThere is a maximum frequency of 440kHz for this dc regulators. A frequency of 400kHz is used by the switching controller. The temperature should be at least -40°C. Running the machine at 125°C is ideal. A 8-SOIC would be the supplier dc dc controller package for this part. The controller switches with phase number 1. Switching voltage regulators is rated 14V in terms of maximum supply voltage. MIC2196YM-TR FeaturesTransistor Driver Outputs Switching Frequency: 400kHz Enable Max Duty Cycle: 85 % Frequency: 400kHz MIC2196YM-TR ApplicationsThere are a lot of Microchip Technology MIC2196YM-TR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | LM3477MMX/NOPB OverviewIt comes in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, which makes switching controller suitable for most applications. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. The system can process Transistor Driver dc switching's outputs (s). This dc control operates at 2.97V~35V and has a 2.97V~35V supply voltage. Qualified to work in a -40°C~125°C TJ dc switcher. This switching controller can switch at 500kHz. dc dc regulator is made easier with Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . A variety of dc switching's functions can be performed on 8 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. Other relevant dc to dc converter ics will be returned if you search "LM3477". 8 pins are on switching converter. dc dc voltage regulators should have a minimum input voltage of 2.97V. DC regulator outputs 1.265V voltage according to the test statistics. The dc dc regulator's usual output current is 6A, which should be noted down when you start a project. A duty cycle set at 93 % ensures voltage regulator dc to dc reliability during power-on and power-off. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. 575kHz is the maximum frequency of this dc regulators. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 35V. The dc switching utilizes 2mA when it is in a dormant state. Switching with 1 phases is the property of this controller. LM3477MMX/NOPB FeaturesTransistor Driver Outputs Switching Frequency: 500kHz Enable PULSE WIDTH MODULATION Max Duty Cycle: 93 % LM3477MMX/NOPB ApplicationsThere are a lot of Texas Instruments LM3477MMX/NOPB DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | LM25085QMYE/NOPB OverviewWith its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller fits the needs of most applications. The dc motor controller is adquate to generate for 1 outputs. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. There are Transistor Driver dc switching's output (s) that it can handle. DC control operates at 4.5V~42V volts and has 4.5V~42V supply voltage. Worked in an dc switcher with a -40°C~125°C TJ rating. Switching can be done at Up to 1MHz with this switching controller. The Surface Mount makes it ideal for general dc dc regulator. Switching control is made easier with the dcdc regulator's Current Limit, Frequency Control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. There are a DUAL terminal on the switching converters. 8 terminations with a variety of function. A DC switcher's nominal voltage of 24V is input. LM25085 can be used to locate other relevant dc to dc converter ics. There are 8 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. Statistically, DC regulator outputs 42V volts. It's important to remember that the dc dc regulator's normaloutput current is 1.75A, so you should note it down when starting a new project. voltage regulator dc to dcs with a 100 % duty cycle are designed to be reliable when powered on and powered off. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sDC regulator has a maximum frequency of 1MHz. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 42V. Basically, it's a dc to dc voltage regulator from the Automotive, AEC-Q100 series. In dormant mode, 1.25mA is used. Since the dc switcher's maximum input voltage is 42V, the voltage must be regulated accordingly. The supply voltage must be 4.5V. DC switcher will not be able to provide an output current above 10A volts. The switching converter can output 42V volts at its utmost, according to the datasheet. 1.25V voltage output is lower than 1.25V. LM25085QMYE/NOPB FeaturesTransistor Driver Outputs Switching Frequency: Up to 1MHz Current Limit, Frequency Control Max Duty Cycle: 100 % LM25085QMYE/NOPB ApplicationsThere are a lot of Texas Instruments LM25085QMYE/NOPB DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | LM3488QMMX/NOPB OverviewThis switching controller fits most application requirements since it is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. 1 outputs can be generated with the dc motor controller. Tape & Reel (TR) solid enclosure protects the pmic. There are Transistor Driver dc switching's output (s) that it can handle. This dc control has a supply voltage and operating voltage of 2.97V~40V. Qualified to work in an dc switcher with -40°C~125°C TJ. In this switching controller, the switch can be set to 100kHz~1MHz. dc dc regulators can be carried out with Surface Mount. Enable, Frequency Control is used for efficient switching control in the dcdc regulator. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Thare switching converters has a terminal (s) at DUAL . An array of 8 terminations of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's voltage input of 12V. Search for "LM3488" to find other relevant dc to dc converter ics. In total, switching converter has 8 pins. Switching converter type is specifically Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 2.97V. Statistically, the DC regulator outputs 300V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 1A. It is set to 100 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. The Surface Mount makes DC switcher suitable for most applications and prototypes. There is a maximum frequency of 1MHz on this dc regulators. It is suggested that users apply 40V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. Basically, it's a dc to dc voltage regulator from the Automotive, AEC-Q100 series. As long as the dc switching is in a dormant state, it utilizes 2.7mA. Switching controller is necessary to supply a voltage of 12V. LM3488QMMX/NOPB FeaturesTransistor Driver Outputs Switching Frequency: 100kHz~1MHz Enable, Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 100 % LM3488QMMX/NOPB ApplicationsThere are a lot of Texas Instruments LM3488QMMX/NOPB DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
| APS | TC105333ECTTR OverviewThe switching controller fits in the SC-74A, SOT-753 package and is ideal for most applications. For 1 outputs, the dc motor controller is appropriate. There is a Tape & Reel (TR) solid enclosure around the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 2.2V~10V. Qualified to work in a -40°C~85°C TA dc switcher. Switching can be done at 300kHz with this switching controller. Surface Mount makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Enable. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . Different dc switching's functions can be applied to 5 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. Other relevant dc to dc converter ics will be returned if you search "TC105". 5 pins are on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 2.2V. A 3.3V voltage of DC regulator was detected in the test statistics. You should note that the dc dc regulator's usual output current is 1A. This Surface Mount makes DC switcher suitable for most prototypes and applications. DC regulator's maximum frequency is 345kHz. The value of DC to DC voltage regulator is set at PFM CONTROL TECHNIQUE IS ALSO POSSIBLE in order to fulfill the requirements more effectively. It is suggested that users apply 10V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. TC105333ECTTR FeaturesTransistor Driver Outputs Switching Frequency: 300kHz Enable PULSE WIDTH MODULATION PFM CONTROL TECHNIQUE IS ALSO POSSIBLE TC105333ECTTR ApplicationsThere are a lot of Microchip Technology TC105333ECTTR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife |
199
In-stock
|
Get Quote | ||||
| Ultralife | TPS40190DRCR OverviewAs a result of 10-VFDFN Exposed Pad compact design, the switching controller is compatible with most applications. 1 outputs can be generated with the dc motor controller. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) are supported. 4.5V~15V is the operating voltage and supply voltage of the dc control. Work well in dc switchers with a -40°C~85°C TA. It can switch at 300kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . An array of 10 terminations of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. A search for "TPS40190" will reveal other relevant dc to dc converter ics. There are only 10 pins on switching converter. A 12.75V voltage of DC regulator was detected in the test statistics. You should note down the dc dc regulator's usual output current of 20A when you start a project. It is estimated that this dc regulatorhas a maximum frequency of 360kHz. As long as the dc switching is in a dormant state, it utilizes 2.5mA. The maximum input voltage of this dc switcher is 15V, so users must limit the voltage accordingly. Voltage 4.5V is necessary for the supply. Input current cannot exceed 20A with this dc switcher. As per its datasheet, the switching converter has a maximum output of 12.75V volts. voltage controllers with a minimum voltage output of 600mV cannot operate. TPS40190DRCR FeaturesTransistor Driver Outputs Switching Frequency: 300kHz Enable PULSE WIDTH MODULATION TPS40190DRCR ApplicationsThere are a lot of Texas Instruments TPS40190DRCR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
| APS | MIC38HC43YM-TR OverviewWith its 8-SOIC (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. 1 outputs can be generated with the dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. The system can process Transistor Driver dc switching's outputs (s). dc controls with 7.6V~20V voltage are supplied and operated. Suitable for working in an dc switcher that has a -40°C~85°C TA. The Surface Mount value makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Frequency Control. You can find other relevant dc to dc converter ics by searching "MIC38HC43". The switching converter has a total of 8 pins. According to the test statistics, DC regulator outputs 5V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 1A. voltage regulator dc to dcs with a 96 % duty cycle are designed to be reliable when powered on and powered off. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulators have a maximum frequency of 500kHz. The switching controller works at a frequency of 500kHz. At -40°C and above, dc regulator should be kept. A temperature of 85°C more than 85°C degrees Celsius should be maintained in the undc regulator. In dormant mode, 4mA is used. There is 8-SOIC dc dc controller package associated with this part. 4mA volts is the supply current. Switches with 1 phases are used in this controller. According to its maximum supply voltage rating, the voltage controller is rated 20V. Having a current greater than 6mA may result in improper operation and possibly damage to the component. When this switching controller is running at frequency 500kHz, it can perform well in most cases. MIC38HC43YM-TR FeaturesTransistor Driver Outputs Frequency Control Max Duty Cycle: 96 % Frequency: 500kHz Switching Frequency: 500kHz MIC38HC43YM-TR ApplicationsThere are a lot of Microchip Technology MIC38HC43YM-TR DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife | LM3524DMX/NOPB OverviewWith a 16-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. PMIC is packaged in a solid enclosure of Tape & Reel (TR). With Transistor Driver dc switching's output (s), it is able to handle it. This dc control operates at 8V~40V and has a 8V~40V supply voltage. Qualified to work in an dc switcher with 0°C~125°C TJ. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. DUAL are the position of the terminal of the switching converters. A variety of terminations with 16 of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 20V. Search for "LM3524" to find other relevant dc to dc converter ics. Pins number 16 of switching converter in total. Specifically, switching converter falls under the Switching Regulator or Controllers category. This dc dc voltage regulator should be powered by a voltage of 8V. A 60V voltage of DC regulator was detected in the test statistics. The dc to dc regulator can only accept 40V input voltage. In most cases, the output current of the dc dc regulator will be 200mA, so note that when you start the project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 49 %. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. There is a maximum frequency of 350kHz for this dc regulators. When running the voltage regulator dc to dc in a circuit, users should apply 8V to ensure safety and reliability. DC switching uses 5mA when it is dormant. A current of 1mA is supplied to it. This controller performs best at a frequency of 350kHz. LM3524DMX/NOPB FeaturesTransistor Driver Outputs Current Limit, Enable, Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 49 % Switching Frequency: 350kHz LM3524DMX/NOPB ApplicationsThere are a lot of Texas Instruments LM3524DMX/NOPB DC to DC converter applications.
|
999
In-stock
|
Get Quote | |||
| Ultralife |
3004
In-stock
|
Get Quote | ||||
| Ultralife | LM5150QRUMTQ1 OverviewCapsuled in the 16-WQFN Exposed Pad package, the switching controller suits most application needs. 1 outputs can be generated with the dc motor controller. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. With this function, you can deal with Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 1.5V~42V. Suitable for working in an dc switcher that has a -40°C~125°C TA. The switching controller is capable of switching at the 220kHz~2.3MHz position. dc dc regulators can be carried out with Surface Mount. The dcdc regulator features Enable, Current Limit for efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminal (s) are designed at QUAD . An array of 16 terminations of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's voltage input is 1.7V. In addition to "LM5150", there are other relevant dc to dc converter ics you can find. In total, switching converter has 16 pins. As determined by the test statistics, the output voltage of DC regulator is 6.8V. It should be fully noted that the dc to dc regulator only accepts 42V input voltage at most. DC to DC voltage regulator has the value of OUTPUT VOLTAGE= 5V TO 42V to better satisfy the requirement. There are several dc to dc voltage regulator in the Automotive, AEC-Q100 series. LM5150QRUMTQ1 FeaturesTransistor Driver Outputs Switching Frequency: 220kHz~2.3MHz Enable, Current Limit PULSE WIDTH MODULATION OUTPUT VOLTAGE= 5V TO 42V LM5150QRUMTQ1 ApplicationsThere are a lot of Texas Instruments LM5150QRUMTQ1 DC to DC converter applications.
|
3000
In-stock
|
Get Quote | |||
| Ultralife | <h3>LM5022MMX/NOPB Overview</h3><div><br/>In the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller meets most application requirements. The dc motor controller is adquate to generate for 1 outputs. Tape & Reel (TR) solid enclosure protects the pmic. There are Transistor Driver dc switching's output (s) that it can handle. dc controls with 6V~60V voltage are supplied and operated. Qualified to work in a -40°C~125°C TJ dc switcher. This switching controller can switch at 200kHz~990kHz. The Surface Mount allows it to be used for dc dc regulator in general. Switching control is made easier with the dcdc regulator's Frequency Control, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . An array of 10 terminations of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 24V. LM5022 can be searched for other relevant dc to dc converter ics. There are a total of 10 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. Input voltage of dc dc voltage regulator must be 6V. Statistically, the DC regulator outputs 57V voltage. In most cases, the dc dc regulator's output current is 1A. This information should be noted when you begin working with the component. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 95 %. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThis dc regulatorhas a max frequency of 1.115MHz. When running the voltage regulator dc to dc in a circuit, users should apply 60V to ensure safety and reliability. Dormant dc switchings use 3.5mA. <br/><br/></div><h3>LM5022MMX/NOPB Features</h3><div><br/>Transistor Driver Outputs<br/>Switching Frequency: 200kHz~990kHz<br/>Frequency Control, Soft Start<br/>PULSE WIDTH MODULATION<br/>Max Duty Cycle: 95 %<br/><br/></div><h3>LM5022MMX/NOPB Applications</h3><div><br/>There are a lot of Texas Instruments LM5022MMX/NOPB DC to DC converter applications. <br/><br/></div><ul style="list - style: none; padding: 0; margin: 0; "><li>Servo drive system<!--<li--></li><li>Balance equipment<!--<li--></li><li>Correction machines<!--<li--></li><li>Surge protection circuits<!--<li--></li><li>Grinders<!--<li--></li><li>Hydraulic presses<!--<li--></li><li>Wind power<!--<li--></li><li>Plate bending machines<!--<li--></li><li>Computer-related products<!--<li--></li><li>Alternators<!--<li--></li></ul> |
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.
