Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Texas Instruments | FPC401RHUT OverviewIt is appropriate for the device to use the 56-WFQFN Exposed Padpackage.The package contains a Tape & Reel (TR) case.Surface Mountis used to install this component.Controllerapplies to this component.The device is capable of supplying voltages of 1.8V~3.3V volts.On the basis of the [0], it is possible to find related parts.This termination has 56terminations.When the supply voltage is set to [0], the potentiometer conducts.The component was designed to operate at a minimum temperature of -40°C.Using this device, it is also possible to establish [0]. FPC401RHUT FeaturesIt is based on FPC401. FPC401RHUT ApplicationsThere are a lot of Texas Instruments FPC401RHUT Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology | AT83C22OK103-RDTIM OverviewIt is appropriate for the device to use the 64-LQFPpackage.There is a Traycase included with it.Surface Mountis the way in which this component is installed.Devices that are capable of supplying 3.6V~5.5Vvolts may be used.Using the AT83C22can help you find related parts.By [0], it is mounted. AT83C22OK103-RDTIM FeaturesIt is based on AT83C22. AT83C22OK103-RDTIM ApplicationsThere are a lot of Microchip Technology AT83C22OK103-RDTIM Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | XIO2213BZAJ OverviewIt's a good fit for the 168-TFBGA package.It comes in a case with a [0].The component has been installed according to the Surface Mountmethod.It is appropriate for the component applied in PC's, PDA's.It is possible to find devices that supply 1.5V 3.3V volts.By using the [0], it is possible to find parts that are related.The number of terminations is 168.It is recommended that you set this device to 1.5V.There are a total of 168 pins on the device.168 pins are used for operation.It is mounted on Surface Mount.It operates at a minimum working temperature of -40°C to ensure reliability.It is imperative that the maximum value of 85°Cis maintained in order to ensure continued operation.Electronic components are of the Bus Controllersfamily.This device supports BUS CONTROLLER, PCIuPs/uCs/peripheral ICs.As a result, it is capable of delivering voltage at 1.53.3V.Performance requires that the output frequency of the device not exceed 98.304MHz. XIO2213BZAJ FeaturesIt is based on IO2213. Set the part at 1.5V volts BUS CONTROLLER, PCI of uPs/uCs/Peripheral ICs Type XIO2213BZAJ ApplicationsThere are a lot of Texas Instruments XIO2213BZAJ Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN65DSI85TPAPRQ1 OverviewThe 64-PowerTQFPpackage would be a good match for it.There is a Tape & Reel (TR)case included with it.Surface Mountis used to install this component.Automotiveapplies it to the appropriate component.The ability to supply 1.65V~1.95V volts is available with certain devices.It is possible to find related parts based on the 65DSI85.There are 64 terminations on it.Make sure this device is set to 1.8V.It contains a total of 64 pins.The device must operate at a minimum working temperature of -40°Cin order to be reliable.In addition to ensuring the consistency of the part, 105°Cis the maximum value possible.The electronic part in question belongs to the Automotive, AEC-Q100 series.TELECOM CIRCUITis the type of IC used in the device. SN65DSI85TPAPRQ1 FeaturesIt is based on 65DSI85. Set the part at 1.8V volts Telecom IC Type : TELECOM CIRCUIT SN65DSI85TPAPRQ1 ApplicationsThere are a lot of Texas Instruments SN65DSI85TPAPRQ1 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SCANSTA111SM/NOPB OverviewIt is appropriate for the device to use the 49-LFBGApackage.The item is packaged in a Tray case.In the way of [0], this component is installed.This component is suitable for the application in Testing Equipment.An output voltage of 3V~3.6V volts can be provided by the device.It is possible to find related parts based on the SCANSTA111.There are 49 terminations on it.It is important to note that this device should be set to 3.3V.49pins are on it in total.Operation is carried out through the 49pins.For optimum reliability, it operates at a temperature of [0].When 85°Cis the maximum value, the part will run consistently.There are electronic components in the Other Microprocessor ICs family.In this device, there are MICROPROCESSOR CIRCUIT uPs, uCs, or peripheral ICs.It is capable of delivering voltage at 3.3V degrees Celsius. SCANSTA111SM/NOPB FeaturesIt is based on SCANSTA111. Set the part at 3.3V volts MICROPROCESSOR CIRCUIT of uPs/uCs/Peripheral ICs Type SCANSTA111SM/NOPB ApplicationsThere are a lot of Texas Instruments SCANSTA111SM/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DS30EA101SQ/NOPB OverviewThis fits nicely with the 16-WQFN Exposed Pad package.A Tape & Reel (TR)case is provided with it.The component is installed according to Surface Mount.It is appropriate for the component applied in Security Systems.It is possible to obtain devices that supply 2.5V volts.Based on the [0], related parts can be found.In total, there are 16terminations.Keep in mind that this device should be set to 2.5V.In total, it contains 16pins.It is mounted by Surface Mount.It is designed to work at a minimum working temperature of -40°C to ensure reliability.When 85°Cis the maximum value, the part will run consistently.The electronic components is from Other Telecom ICs family.This interface IC operates at a voltage of 2.5V.A telecom IC type of LINE EQUALIZERis used in the device. DS30EA101SQ/NOPB FeaturesIt is based on DS30EA101. Set the part at 2.5V volts Telecom IC Type : LINE EQUALIZER DS30EA101SQ/NOPB ApplicationsThere are a lot of Texas Instruments DS30EA101SQ/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DS110DF111SQ/NOPB OverviewThe 24-WFQFN Exposed Padpackage fits the device well.It comes in a Tape & Reel (TR) case.There is no installation of this component in the way of Surface Mount.There is the potential for the device to supply 2.375V~2.625V 3V~3.6V volts.The DS110DF111can be used to find related parts.This termination has 24terminations.This device should be set to 2.5V.There are a total of 24 pins on the device.Surface Mountmounts it.A minimum working temperature of -40°Cis required to ensure the reliability of the device.When 85°Cis the maximum value, the part will run consistently.Interface ICs operate at a voltage level of 3.3V volts.With the use of this device, ALSO OPERATES WITH 3V TO 3.6Vcan also be established.There are 2 channels available on the device.A frequency of 400kHzis suitable for running the part. DS110DF111SQ/NOPB FeaturesIt is based on DS110DF111. Set the part at 2.5V volts DS110DF111SQ/NOPB ApplicationsThere are a lot of Texas Instruments DS110DF111SQ/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | XIO2221ZAY OverviewIt fits well with the package [0].It comes in a Tray case.In the way of [0], this component is installed.PCI Express to PCI Translation Bridgeis appropriate for this component.The device is capable of supplying 1.35V~1.65V 3V~3.6V volts.By using the [0], it is possible to find parts that are related.There are 167 terminations on it.Keep in mind that this device should be set to 1.5V.The device has a total of 167pins.A device's operation is controlled by the 167pins.In this case, it is mounted by Surface Mount.A minimum working temperature of 0°Cis required to ensure the reliability of the device.In addition to ensuring the consistency of the part, 70°Cis the maximum value possible.In this case, the electronic components are from the Bus Controllers family.This interface IC operates at a voltage of 3.6V.This device supports BUS CONTROLLER, PCIuPs/uCs/peripheral ICs.Voltage at 1.51.953.3Vcan be delivered by the device. XIO2221ZAY FeaturesIt is based on IO2221. Set the part at 1.5V volts BUS CONTROLLER, PCI of uPs/uCs/Peripheral ICs Type XIO2221ZAY ApplicationsThere are a lot of Texas Instruments XIO2221ZAY Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LMH0202MT/NOPB OverviewThe 16-TSSOP (0.173, 4.40mm Width)package is a good fit for this feature.It is packaged in a Tube case.The component has been installed according to the Surface Mountmethod.Displaysapplies the component appropriately.It is possible to obtain devices that supply 3.135V~3.465V volts.A LMH0202can be used to identify related parts.A total of 16terminations have been recorded.It is important to remember that this device should be set to 3.3V.There are a total of 16 pins on it.In order for the operation to be performed, the 16pins must be connected.In this case, it is mounted by Surface Mount.The unit operates at a minimum working temperature of 0°Cin order to ensure reliable operation.This value enables the part to run consistently with a maximum value of [0].Electronic components of the Line Driver or Receiversfamily are used.An interface IC operates with a supply voltage of 3.3V. LMH0202MT/NOPB FeaturesIt is based on LMH0202. Set the part at 3.3V volts LMH0202MT/NOPB ApplicationsThere are a lot of Texas Instruments LMH0202MT/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | PCI2250PGF OverviewThis fits well into the 176-LQFP package.It is packaged in a Tray case.Surface Mountis the way in which this component is installed.The component applied in PCI-to-PCI Bridgeis appropriate.There is the potential for the device to supply 3V~3.6V volts.By using the [0], it is possible to find parts that are related.This termination has 176terminations.This device should be set to 3.3V.It has a total of 176pins.In order to operate, we use the 176pins.It is mounted on Surface Mount.It is designed to work at a minimum working temperature of 0°C to ensure reliability.This value enables the part to run consistently with a maximum value of [0].Electronic components from the family Bus Controllersare used.An interface IC operates with a supply voltage of 5V.As long as the frequency is set to [0], the device is capable of achieving good efficiency. PCI2250PGF FeaturesIt is based on PCI2250. Set the part at 3.3V volts Run frequency at 33MHz PCI2250PGF ApplicationsThere are a lot of Texas Instruments PCI2250PGF Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | OPA4872MDREP OverviewThis fits nicely with the 14-SOIC (0.154, 3.90mm Width) package.There is a Tape & Reel (TR)case included with it.In this case, this component is installed in accordance with Surface Mount.This component applies to Multiplexer with Amplifier.Devices that are capable of supplying ±3.5V~6Vvolts may be used.On the basis of the [0], it is possible to find related parts.This termination has 14terminations.Keep in mind that this device should be set to 5V.It has a total of 14pins.Operation is carried out using the 14pins.The mount is Surface Mount.It is designed to work at a minimum working temperature of -55°C to ensure reliability.In addition to ensuring the consistency of the part, 125°Cis the maximum value possible.The electronic components belong to the Multiplexer or Switches family.Interface ICs operate at a voltage level of 5V volts.It uses an analog IC of type [0].The device has 1 channels on it.There are 4 inputs to operate. OPA4872MDREP FeaturesIt is based on OPA4872. Set the part at 5V volts Other Analog IC Type : SINGLE-ENDED MULTIPLEXER OPA4872MDREP ApplicationsThere are a lot of Texas Instruments OPA4872MDREP Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DS125DF111SQE OverviewIt fits well with the package [0].A case of Tape & Reel (TR)is provided.The component has been installed according to the Surface Mountmethod.Signal Retimerapplies it to the appropriate component.Devices that are capable of supplying 2.5V 3.3Vvolts may be used.On the basis of the [0], it is possible to find related parts.The termination count on it is [0].It is recommended that you set this device to 2.5V.It has a total of 24pins.Currently, Surface Mountis mounting it.A minimum working temperature of -40°Cis required to ensure the reliability of the device.This value enables the part to run consistently with a maximum value of [0].The interface IC conducts at a voltage of 2.5V.Using this device, ALSO OPERATE 3.3 VOLT SUPPLYcan also be established.In this device, there are 2channels.In this case, it is suitable to run the part at a maximum frequency of 12.5GHz. DS125DF111SQE FeaturesIt is based on DS125DF111. Set the part at 2.5V volts DS125DF111SQE ApplicationsThere are a lot of Texas Instruments DS125DF111SQE Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | SN65DSI86IPAPRQ1 OverviewThe 64-PowerTQFPpackage is a good fit for it.A case of Tape & Reel (TR)is provided.It is installed according to Surface Mount.In this case, it is appropriate for the component applied in Netbooks, Notebook PC, Tablet.There is the potential for the device to supply 1.14V~1.26V volts.On the basis of the [0], it is possible to find related parts.This termination has 64terminations.It is important to note that this device should be set to 1.2V.When the supply voltage is [0], the potentiometer conducts.There are several electronic parts in the Automotive, AEC-Q100series, including this one.It is designed to function at a minimum temperature of -40°C°C.TELECOM CIRCUITis the telecom IC type used in the device. SN65DSI86IPAPRQ1 FeaturesIt is based on 65DSI86. Set the part at 1.2V volts Telecom IC Type : TELECOM CIRCUIT SN65DSI86IPAPRQ1 ApplicationsThere are a lot of Texas Instruments SN65DSI86IPAPRQ1 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LMH0070SQ/NOPB Overview48-WFQFN Exposed Padis an appropriate package for this device.It is packaged in a Tape & Reel (TR) case.This component is installed in the way of Surface Mount.This is appropriate for the component that is applied in DisplaysThe device is capable of supplying 3.135V~3.465V volts.Using the LMH0070you can find related parts.The number of terminations is 48.Keep in mind that this device should be set to 2.5V.The device has a total of 48pins.Currently, Surface Mountis mounting it.The device operates at a minimum working temperature of -40°C in order to ensure its reliability.By setting the value of 85°Cto the maximum, this ensures that the part will run consistently.It is assumed that the interface IC conducts when its supply voltage is 3.3V.The part has embedded 1drivers. LMH0070SQ/NOPB FeaturesIt is based on LMH0070. Set the part at 2.5V volts with 1 Drivers LMH0070SQ/NOPB ApplicationsThere are a lot of Texas Instruments LMH0070SQ/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DS110DF410SQ/NOPB OverviewIt fits well with the package [0].It comes in a case with a [0].The component is installed according to Surface Mount.This component applies to Ethernet.The ability to supply 2.375V~2.625V volts is available with certain devices.A DS110DF410can be used to identify related parts.In total, there are 48terminations.It is important to keep in mind that this device should be set to 2.5V.It has a total of 48pins.In this case, it is mounted by Surface Mount.It is designed to work at a minimum working temperature of -40°C to ensure reliability.In order to maintain consistency, a maximum value of 85°Cis recommended.In the interface IC, the supply voltage is set to 2.5V.The device has 4 channels on it. DS110DF410SQ/NOPB FeaturesIt is based on DS110DF410. Set the part at 2.5V volts DS110DF410SQ/NOPB ApplicationsThere are a lot of Texas Instruments DS110DF410SQ/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DS100RT410SQE/NOPB OverviewIt fits well with the package [0].It comes in a Tape & Reel (TR) case.In the way of [0], this component is installed.In this case, it is appropriate for the component applied in Ethernet.A device capable of providing 2.375V~2.625V volts is available.The DS100RT410can be used to find related parts.This termination has 48terminations.It is important to keep in mind that this device should be set to 2.5V.It contains a total of 48 pins.In this case, it is mounted by Surface Mount.It is designed to work at a minimum working temperature of -40°C to ensure reliability.Keeping 85°Cas the maximum value will ensure consistency.In the interface IC, the supply voltage is set to 2.5V.In this device, there are 4channels.A frequency of 400kHzis suitable for running the part. DS100RT410SQE/NOPB FeaturesIt is based on DS100RT410. Set the part at 2.5V volts DS100RT410SQE/NOPB ApplicationsThere are a lot of Texas Instruments DS100RT410SQE/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LM96570SQ/NOPB OverviewThe 32-WFQFN Exposed Padpackage would be a good match for it.This product comes in a Tape & Reel (TR) case.In this case, this component is installed in accordance with Surface Mount.Ultrasound Imaging - Transmit Beamformerapplies to this component.There is the potential for the device to supply 1.71V~1.89V volts.The LM96570can be used to find related parts.This termination has 32terminations.A total of 32pins are located on it.A device's operation is controlled by the 32pins.Electronic components of the Other Consumer ICsfamily are used.A voltage of 70°Cpowers the potentiometer.It is capable of delivering voltage at 1.83.3V.You can sort parts by their consumer integrated circuit types by using [0]. LM96570SQ/NOPB FeaturesIt is based on LM96570. LM96570SQ/NOPB ApplicationsThere are a lot of Texas Instruments LM96570SQ/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LMH0070SQE/NOPB OverviewIt fits well with the package [0].It is packaged in a Tape & Reel (TR) case.The component is installed according to Surface Mount.Displaysis appropriate for this component.A device capable of providing 3.135V~3.465V volts is available.Based on the [0], related parts can be found.It has 48terminations.Keep in mind that this device should be set to 2.5V.There are a total of 48 pins on the device.Surface Mountmounts it.It is designed to work at a minimum working temperature of -40°C to ensure reliability.The maximum value of 85°C assures that the part runs consistently.This interface IC operates at a voltage of 3.3V.On the part, there are 1 drivers embedded. LMH0070SQE/NOPB FeaturesIt is based on LMH0070. Set the part at 2.5V volts with 1 Drivers LMH0070SQE/NOPB ApplicationsThere are a lot of Texas Instruments LMH0070SQE/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | TX517IZCQ OverviewA Traycase is provided with it.In the way of [0], this component is installed.This component applies to Medical.By using the [0], it is possible to find parts that are related.The number of terminations is 144.Make sure this device is set to 2.5V.There are a total of 144 pins on the device.In order to operate, we use the 144pins.The device operates at a minimum working temperature of 0°C in order to ensure its reliability.As long as the maximum value is [0], the part runs consistently.Electronic components of the Other Interface ICsfamily are used.It is capable of delivering voltage at +-52.5V degrees Celsius.The interface IC type of this part are classified as INTERFACE CIRCUIT.The maximum supply voltage it can handle is 5.25V. TX517IZCQ FeaturesIt is based on TX517. Set the part at 2.5V volts Interface IC Type : INTERFACE CIRCUIT TX517IZCQ ApplicationsThere are a lot of Texas Instruments TX517IZCQ Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LMH0340SQX/NOPB OverviewThe 48-WFQFN Exposed Padpackage is a good fit for it.The package contains a Tape & Reel (TR) case.In this case, this component is installed in accordance with Surface Mount.Video Equipmentapplies the component appropriately.The ability to supply 2.5V 3.3V volts is available with certain devices.The LMH0340can be used to find related parts.In total, there are 48terminations.It is important to note that this device should be set to 2.5V.There are a total of 48 pins on it.Currently, Surface Mountis mounting it.It operates at a minimum working temperature of -40°C to ensure reliability.Keeping 85°Cas the maximum value will ensure consistency.In the interface IC, the supply voltage is set to 3.3V.The part is embedded with 1drivers. LMH0340SQX/NOPB FeaturesIt is based on LMH0340. Set the part at 2.5V volts with 1 Drivers LMH0340SQX/NOPB ApplicationsThere are a lot of Texas Instruments LMH0340SQX/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | LMH0394SQX/NOPB OverviewIt's a good fit for the 16-WQFN Exposed Pad package.It comes in a case with a [0].There is no installation of this component in the way of Surface Mount.In this case, it is appropriate for the component applied in Amplifier.There is the potential for the device to supply 2.375V~2.625V volts.Based on the [0], it is possible to locate related parts.In total, there are 16terminations.Make sure that this device is set to 2.5V.16pins are on it in total.This is mounted by Surface Mount.It operates at a minimum working temperature of -40°C to ensure reliability.This value enables the part to run consistently with a maximum value of [0].The electronic components is from Other Telecom ICs family.The interface IC conducts in a supply voltage of 2.5V.IC type LINE EQUALIZERis used in the device. LMH0394SQX/NOPB FeaturesIt is based on LMH0394. Set the part at 2.5V volts Telecom IC Type : LINE EQUALIZER LMH0394SQX/NOPB ApplicationsThere are a lot of Texas Instruments LMH0394SQX/NOPB Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Texas Instruments | DS250DF210ABMT OverviewThis fits well into the 101-TFBGA, FCCSPBGA package.The package contains a Tape & Reel (TR) case.In this case, this component is installed in accordance with Surface Mount.The component applied in Retimeris appropriate.By using the [0], it is possible to find parts that are related.A total of 101terminations have been recorded.A total of 101pins are located on it.A minimum working temperature of -40°Cis required to ensure the reliability of the device.It is imperative that the maximum value of 85°Cis maintained in order to ensure continued operation.There are 2 channels on the device.This part is classified as a INTERFACE CIRCUITinterface IC. DS250DF210ABMT FeaturesIt is based on DS250DF210. Interface IC Type : INTERFACE CIRCUIT DS250DF210ABMT ApplicationsThere are a lot of Texas Instruments DS250DF210ABMT Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Microchip Technology |
40
In-stock
|
Get Quote | ||||
NXP Semiconductors | TDA8024TT/C1,118 OverviewIt fits well with the package [0].There is a Tape & Reel (TR)case included with it.Surface Mountis used to install this component.The ability to supply 2.7V~6.5V volts is available with certain devices.By using the [0], it is possible to find parts that are related.It has 28terminations.It is important to note that this device should be set to 3.3V.28 pins are used for operation.The potentiometer conducts in a supply voltage of 85°C.The component has been design to operate at a minimum temperature of -25°C. TDA8024TT/C1,118 FeaturesIt is based on TDA8024. Set the part at 3.3V volts TDA8024TT/C1,118 ApplicationsThere are a lot of NXP USA Inc. TDA8024TT/C1,118 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Infineon Technologies | TLE9261BQXXUMA1 OverviewIt is appropriate for the device to use the 48-VFQFN Exposed Padpackage.The package contains a Tape & Reel (TR) case.Surface Mountis the way in which this component is installed.Automotiveis appropriate for this component.The device is capable of supplying voltages of 28V volts.The number of terminations is 48.This device should be set to 13.5V. TLE9261BQXXUMA1 FeaturesSet the part at 13.5V volts TLE9261BQXXUMA1 ApplicationsThere are a lot of Infineon Technologies TLE9261BQXXUMA1 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | MC33975ATEKR2 OverviewThe 32-SSOP (0.295, 7.50mm Width) Exposed Padpackage would be a good match for it.It comes in a case with a [0].The component is installed in the way indicated by Surface Mount.Switch Monitoringapplies the component appropriately.Based on the [0], it is possible to locate related parts.This termination has 32terminations.It is recommended that you set this device to 5V.Potentiometers operate at a supply voltage of 125°C.A temperature of -40°C is the minimum operating temperature for the component. MC33975ATEKR2 FeaturesIt is based on MC33975. Set the part at 5V volts MC33975ATEKR2 ApplicationsThere are a lot of NXP USA Inc. MC33975ATEKR2 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Infineon Technologies | TLE92613BQXXUMA1 OverviewIt fits well with the package [0].It is packaged in a Tape & Reel (TR) case.This component is installed in the way of Surface Mount.This component applies to Automotive.A device capable of providing 28V volts is available.The termination count on it is [0].It is important to note that this device should be set to 13.5V. TLE92613BQXXUMA1 FeaturesSet the part at 13.5V volts TLE92613BQXXUMA1 ApplicationsThere are a lot of Infineon Technologies TLE92613BQXXUMA1 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Infineon Technologies | TLE92633BQXXUMA1 Overview48-VFQFN Exposed Padis an appropriate package for this device.There is a Tape & Reel (TR)case included with it.Surface Mountis used to install this component.This component applies to Automotive.Devices that are capable of supplying 28Vvolts may be used.It has 48terminations.Keep in mind that this device should be set to 13.5V. TLE92633BQXXUMA1 FeaturesSet the part at 13.5V volts TLE92633BQXXUMA1 ApplicationsThere are a lot of Infineon Technologies TLE92633BQXXUMA1 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
Infineon Technologies | TLE92623BQXV33XUMA1 OverviewThe 48-VFQFN Exposed Padpackage fits the device well.The item is packaged in a Tape & Reel (TR) case.The component is installed in the way indicated by Surface Mount.The component applied in Automotiveis appropriate.It is possible to obtain devices that supply 28V volts.The number of terminations is 48.It is important to keep in mind that this device should be set to 13.5V. TLE92623BQXV33XUMA1 FeaturesSet the part at 13.5V volts TLE92623BQXV33XUMA1 ApplicationsThere are a lot of Infineon Technologies TLE92623BQXV33XUMA1 Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote | |||
NXP Semiconductors | MC33975ATEK OverviewThe 32-SSOP (0.295, 7.50mm Width) Exposed Padpackage fits the device well.This product comes in a Tube case.In the way of [0], this component is installed.This component applies to Switch Monitoring.Using the MC33975can help you find related parts.It contains 32terminations.It is recommended that you set this device to 5V.The potentiometer conducts in a supply voltage of 125°C.Designed to work at a minimum temperature of -40°C°C, the component must operate at this temperature. MC33975ATEK FeaturesIt is based on MC33975. Set the part at 5V volts MC33975ATEK ApplicationsThere are a lot of NXP USA Inc. MC33975ATEK Specialized Interface ICs applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.