Shine Ever will be exhibiting at ELECTRONICA in Munich Nov 12-15, 2024! COME VISIT US AT BOOTH 118/2, Hall C5
My Cart
Total:0Sub-Total : $0.00
Image Part Manufacturer Description Stock Action
TS5A4594DCKR Ultralife

TS5A4594DCKR Overview


Presented in 5-TSSOP, SC-70-5, SOT-353, this electrical component is convenient for overseas shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operating temperature around -40°C~85°C TA extended. In total, there have been 5 terminations. The electronic part delivers high-quality output through its 1 channels. Turning on and running the electrical part should be easy with a 3V voltage supply. 5 pins are injected to the electronic part body. Based on SPST - NO switching circuits, these analog multiplexers work. Use TS5A4594 to search for variants of the digital switches. As far as internal resistance is concerned, it has 8Ohm. The datasheets for the 5 pins explain the functions. This switch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. The analog switch ic is of the Single supply type and is cost-effective. There should be 2V voltage fed to the electrical part below 2V. For this digital switch to work, 10nA current would suffice. A voltage of 2V~5.5V is required for this switch device, which drains from a single voltage source. Putting voltage greater than 250nA on the multiplexer may cause damage. The data can be transferred over a wide range of bandwidths, called 450MHz bandwidths. Drain to Source resistance for this electronic component is 8Ohm.

TS5A4594DCKR Features


1 Channels
Switch Circuit: SPST - NO
10nA Supply Current
Bandwidth: 450MHz
Drain-to-Source resistance: 8Ohm

TS5A4594DCKR Applications


There are a lot of Texas Instruments TS5A4594DCKR Analog Switches & Multiplexers ICs applications.

  • Channelized and Unchannelized DS3 applications
  • Video switching
  • PDH Multiplexers
  • ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
  • Digital access cross connects
  • High reliability control systems
  • Access Concentrators
  • Power routing
  • MP3 players
  • DVD-R
999
In-stock
Get Quote
TS5A4595DBVR Ultralife

TS5A4595DBVR Overview


Due to its SC-74A, SOT-753 packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Mounted in Surface Mount is this multiplexer. There is 1:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. A total of 5 terminations have been recorded. Due to its 1 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. 5 pins are injected to the electronic part body. A SPST - NC switching circuit is used for these analog switches. Look for analog switch ic variants by searching with TS5A4595. Internally, this switch multiplexer has a resistance of 8Ohm. Datasheets for functions of 5 pins are available. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. The digital multiplexer has a low cost Single supply. In order for the electronic part to function properly, the lowest voltage should be 2V. In order to operate this switch device, it would need a current of 10nA. This analog switch requires a voltage of 2V~5.5V to drain from a single voltage supply. When the digital multiplexer is charged above 250nA, damage can occur. This switch operates within the bandwidth of 450MHz.

TS5A4595DBVR Features


1 Channels
Switch Circuit: SPST - NC
10nA Supply Current
Bandwidth: 450MHz

TS5A4595DBVR Applications


There are a lot of Texas Instruments TS5A4595DBVR Analog Switches & Multiplexers ICs applications.

  • Channel Banks
  • Medical
  • Frame Relay Equipment
  • Cable Telephony – NIU, Set-Top Box, Home Side Box
  • Industrial control systems
  • Signal routing between systems
  • USB 1.1 signal switching circuits
  • Communication systems
  • Ultrasound
  • Optical Applications
999
In-stock
Get Quote
CD74HCT4051M96 Ultralife

CD74HCT4051M96 Overview


Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Cut Tape (CT) is used. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. Operating temperature extended to -55°C~125°C TA. Total terminations are 16. As a result of its 1 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 4.5V voltage supply. It is injected into the electrical part body with 16 pins. The circuits in this analogue multiplexer number 1. If you are looking for variants of the digital switch, trying search with 74HCT4051. Internally, this switch multiplexer has a resistance of 130Ohm. The functions of 16 pins can be found in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Dual, Single supply type digital switch with a low cost. 4.5V is the lowest voltage that should be fed to the electronic electronic part. It would be sufficient to run this analogue multiplexer with 160μA current. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 5V. For dual power supplies, a voltage of at least 1V should be attached. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. The electrical part can be operated at 5V voltage levels. It is possible to operate 8 inputs. This switch operates within the bandwidth of 180MHz.

CD74HCT4051M96 Features


1 Channels
160μA Supply Current
Bandwidth: 180MHz

CD74HCT4051M96 Applications


There are a lot of Texas Instruments CD74HCT4051M96 Analog Switches & Multiplexers ICs applications.

  • PDH Multiplexers
  • DSLAMs
  • High reliability control systems
  • Ultrasound
  • Relay replacements
  • CSU
  • Remote wireless modules
  • New designs requiring multiplexer functions
  • Avionics test equipment
  • High-Voltage
999
In-stock
Get Quote
TS5A63157DBVR Ultralife

TS5A63157DBVR Overview


Shipping overseas is convenient with the electronic component packed in SOT-23-6. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 2:1. Operating temperature around -40°C~85°C TA extended. The total number of terminations is 6. A high-quality output is provided by the electrical component's 1 channels. When the electronic component is given a voltage of 1.8V, it should be turned on and run. As part of the design of the 6 series, this electronic part has been incorporated into the system. A SPDT switching circuit is used for these analog switches. Search with TS5A63157 if you are looking for analog multiplexer variants. A 10Ohm internal resistance characterizes this multiplexer. The datasheets for the 6 pins explain the functions. Theswitch device is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. A analog switch ic that has a cost-effective Single supply type. 1.65V is the lowest voltage the electrical component should receive. In order to operate this switch device, it would need a current of 10nA. The voltage required by this switch device is 1.65V~5.5V, draining from a single voltage supply. Putting voltage greater than 100nA on the multiplexer may cause damage. Operating the 2 inputs requires 2 inputs. The data can be transferred over a wide range of bandwidths, called 370MHz bandwidths. A Drain to Source resistance of 12Ohm is shown for this electronic part.

TS5A63157DBVR Features


1 Channels
Switch Circuit: SPDT
10nA Supply Current
-3db Bandwidth: 371MHz
Bandwidth: 370MHz
Drain-to-Source resistance: 12Ohm

TS5A63157DBVR Applications


There are a lot of Texas Instruments TS5A63157DBVR Analog Switches & Multiplexers ICs applications.

  • Medical
  • Transmit
  • ISDN NT1/TA
  • Microwave transmission systems
  • Cable PC
  • Battery Powered Systems
  • New designs requiring multiplexer functions
  • T1/E1 Terminals
  • Digital Cross-Connects
  • Relay replacements
999
In-stock
Get Quote
TS5A3154DCUR Ultralife

TS5A3154DCUR Overview


Shipping overseas is convenient due to the electrical component's packing in 8-VFSOP (0.091, 2.30mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 2:1. Extended operating temperature around -40°C~85°C TA. 8 terminations have been made so far. This electronic part offers high-quality output due to its 1 channels. An 1.8V voltage supply should allow the electrical part to be turned on and run. Into the electrical component body are injected 8 pins. A SPDT switching circuit is used to build these analog multiplexers. Circuits number 1 make up this analogue multiplexer. Try searching for the analog switch ic with TS5A3154 if you are looking for variants. This digital multiplexer has 900mOhm internal resistance. The functions of 8 pins can be found in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. Analog switch ics with Single supply type are cost-effective. 1.65V is the lowest voltage the electrical component should receive. This digital switch can be operated with a current of 20nA. Using only a single voltage supply, this analog switch requires 1.65V~5.5V voltage. The analogue multiplexer may be damaged if voltage is greater than 100nA. In 100MHz-bandwidths, data can be transferred. A analog switch ics with 2 outputs is included.

TS5A3154DCUR Features


1 Channels
Switch Circuit: SPDT
20nA Supply Current
Bandwidth: 100MHz

TS5A3154DCUR Applications


There are a lot of Texas Instruments TS5A3154DCUR Analog Switches & Multiplexers ICs applications.

  • DSLAMs
  • Industrial
  • Audio/video switches
  • ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
  • Voice over IP/DSL – Integrated Access Devices, Smart
  • Transmit
  • PDH Multiplexers
  • FTTH
  • Battery Powered Systems
  • PCMCIA cards
999
In-stock
Get Quote
STG3692QTR Klein Tools, Inc.

STG3692QTR Overview


Shipping overseas is convenient due to the electrical component's packing in 16-UFQFN Exposed Pad. This packaging method provides high reliability because it uses advanced packaging techniques. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 2:1. An extended operating temperature of -55°C~125°C TA degrees Celsius. Totally, there are 16 terminations. A electrical component with 1 channels is capable of high-quality output. When the electronic component is given a voltage of 1.8V, it should be turned on and run. A total of 16 pins are injected into the electrical part body. Multiplexers built on a SPDT switching circuit are built. A 4 circuit is present in this switch device. Use STG3692 to search for variants of the digital switches. An switch multiplexer with 5.2Ohm internal resistance has a value of 5.2Ohm. Datasheets for functions of 16 pins are available. There is a standard Multiplexer or Switches analogue multiplexer here. Multiplexers should not be powered above 4.3V in normal situations. Single supply type digital switch with a low cost. The lowest voltage fed to the electronic component should be 1.65V. In order to operate this switch device, it would need a current of 100nA. A voltage of 1.65V~4.3V is required for this switch device, which drains from a single voltage source. 800MHz bandwidths enable data to be transferred.

STG3692QTR Features


1 Channels
Switch Circuit: SPDT
100nA Supply Current
Bandwidth: 800MHz

STG3692QTR Applications


There are a lot of STMicroelectronics STG3692QTR Analog Switches & Multiplexers ICs applications.

  • New designs requiring multiplexer functions
  • Medical Instrumentation
  • Cable Telephony – NIU, Set-Top Box, Home Side Box
  • High speed data transmission line cards
  • Microprocessor controlled systems
  • Cable PC
  • PBX interfaces
  • Remote Powered Equipment
  • Wireless Local Loop
  • PDH Multiplexers
999
In-stock
Get Quote
NX3L4051HR,115 MG Chemicals

NX3L4051HR,115 Overview


Shipping overseas is convenient due to the electrical component's packing in 16-XFQFN Exposed Pad. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. There is 8:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -40°C~125°C TA are extended for operation. The electrical component body receives 16 pins. The multiplexer consists of 1 circuits. Use NX3L4051 to search for variants of the digital switches. Analogue multiplexers require a 1.4V~4.3V voltage to drain from a single voltage supply.

NX3L4051HR,115 Features


-3db Bandwidth: 15MHz

NX3L4051HR,115 Applications


There are a lot of NXP USA Inc. NX3L4051HR,115 Analog Switches & Multiplexers ICs applications.

  • Medical
  • Medical Instrumentation
  • Cell phones
  • Transmit
  • Industrial and process control systems
  • Microprocessor controlled systems
  • Modems
  • E1 Network Equipment
  • Data Acquisition Systems
  • Digital Cross-Connects
999
In-stock
Get Quote
TS5A3359YZPR Ultralife

TS5A3359YZPR Overview


The electronic part can be shipped overseas conveniently because it is packaged in 8-XFBGA, DSBGA. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 3:1. Around -40°C~85°C TA is the extended operating temperature. A total of 8 terminations have been recorded. The electronic part delivers high-quality output through its 3 channels. If the voltage supply is 1.8V volts, the electrical component should be turned on and run. An injection of 8 pins is performed into the body of the electrical component. Multiplexers built on a SP3T switching circuit are built. Look for analog switch ic variants by searching with TS5A3359. A 900mOhm internal resistance characterizes this multiplexer. To find out what the functions of 8 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. An effective Single supply digital multiplexer. 1.65V should be the lowest voltage fed to the electronic component. An operating current of 16nA would be sufficient for this switch device. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. Put voltage above 50nA on the multiplexer to cause damage. The 1 inputs need to be operated in order to work. This switch operates within the bandwidth of 100MHz. Multiplexer ics with 3 outputs are available.

TS5A3359YZPR Features


3 Channels
Switch Circuit: SP3T
16nA Supply Current
-3db Bandwidth: 75MHz
Bandwidth: 100MHz

TS5A3359YZPR Applications


There are a lot of Texas Instruments TS5A3359YZPR Analog Switches & Multiplexers ICs applications.

  • Audio and video switching
  • Cable Modem
  • Intelligent PBX
  • Fiber In The Loop (FITL)
  • Fiber to the Home
  • Audio and video signal routing
  • PBX interfaces
  • Audio and video routing
  • High-Voltage
  • FTTH
999
In-stock
Get Quote
TS5A23160DGSR Ultralife

TS5A23160DGSR Overview


Packed in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. There is 2:1 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. Total terminations are 10. As a result of its 2 channels, this electronic component provides high-quality output. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. It is part of the design of the 10 series that this electronic component is included. SPDT switching circuits are used in these analog switch ics. Try searching for the analog switch ic with TS5A23160 if you are looking for variants. A 900mOhm internal resistance characterizes this multiplexer. Datasheets for 10 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Digital switch that provides Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 1.65V. This digital switch can be operated with a current of 10nA. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. The switch multiplexer may be damaged if it is exposed to voltage greater than 500nA. 100MHz-bandwidths can be used to transfer data between multiplexers. The analog switch ics has 4 outputs.

TS5A23160DGSR Features


2 Channels
Switch Circuit: SPDT
10nA Supply Current
-3db Bandwidth: 95MHz
Bandwidth: 100MHz

TS5A23160DGSR Applications


There are a lot of Texas Instruments TS5A23160DGSR Analog Switches & Multiplexers ICs applications.

  • Fiber to the Home
  • ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
  • Digital Cross-Connects
  • T1/E1 Terminals
  • Medical systems
  • Fiber In The Loop (FITL)
  • Wireless Local Loop
  • PBX interfaces
  • Precision instrumentation
  • SONET/SDH ADM
999
In-stock
Get Quote
TMUX1574PWR Ultralife

TMUX1574PWR Overview


Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Cut Tape (CT). It is mounted in the position Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of -40°C~125°C TA degrees Celsius. The total number of terminations is 16. A high-quality output is provided by the electrical component's 1 channels. When the electronic component is given a voltage of 3.3V, it should be turned on and run. These analog multiplexers are built based on SPDT switching circuits. 4 circuits are used in this analogue multiplexer. Try searching for the analog switch ic with TMUX1574 if you are looking for variants. There are 2000MHz bandwidths for data transfer. In order to power the analogue multiplexer, it requires an input voltage of 1.5V volts.

TMUX1574PWR Features


1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 2GHz
Bandwidth: 2000MHz

TMUX1574PWR Applications


There are a lot of Texas Instruments TMUX1574PWR Analog Switches & Multiplexers ICs applications.

  • Modems
  • Residential Gateways, Home Gateway/Router
  • Voice over IP/DSL – Integrated Access Devices, Smart
  • Microprocessor Controlled Analog Systems
  • Audio/video switches
  • Optical Applications
  • Private Branch Exchange (PBX)
  • Routers
  • Automotive applications
  • Remote Powered Equipment
999
In-stock
Get Quote
TS5A23157TDGSRQ1 Ultralife

TS5A23157TDGSRQ1 Overview


The electrical component comes in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. 2:1 is the number of circuits in the multiplexer and demultiplexer. Around -40°C~105°C TA is the extended operating temperature. Totally, there are 10 terminations. High-quality output is provided by the electronic component's 1 channels. When the electronic component is given a voltage of 1.8V, it should be turned on and run. 10 pins are injected to the electronic part body. On the other hand, analog switches can be constructed using SPDT switching circuits. The circuits in this analogue multiplexer number 2. Use TS5A23157 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 10Ohm. For details about the functions of 10 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage fed to the electronic component should be 1.65V. An operating current of 1μA would be sufficient for this switch device. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. It may damage the digital multiplexer if the voltage is higher than 10μA. It is possible to operate 2 inputs. The transfer of data can be performed over 220MHz bandwidths. The analog switch ics has 4 outputs. It comes from the Automotive, AEC-Q100 series.

TS5A23157TDGSRQ1 Features


1 Channels
Switch Circuit: SPDT
1μA Supply Current
Bandwidth: 220MHz

TS5A23157TDGSRQ1 Applications


There are a lot of Texas Instruments TS5A23157TDGSRQ1 Analog Switches & Multiplexers ICs applications.

  • High reliability control systems
  • Remote wireless modules
  • DSLAMs
  • Avionics
  • Cable PC
  • High speed data transmission line cards
  • Routers
  • Voice over IP/DSL – Integrated Access Devices, Smart
  • Precision data acquisition
  • Video switching
999
In-stock
Get Quote
CD4052BE Ultralife

CD4052BE Overview


The electronic part can be shipped overseas conveniently because it is packaged in 16-DIP (0.300, 7.62mm). High reliability is provided by advanced packaging method Tube. Multiplexers like this are mounted in the Through Hole position. Multiplexers and demultiplexers have a ratio of 4:1. Operating temperature extended to -55°C~125°C TA. The total number of terminations is 16. By its 4 channels, the electronic component provides high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. It is part of the design of the 16 series that this electronic component is included. SP4T switching circuits are used in these analog switch ics. 2 circuits are used in this analogue multiplexer. Try searching for the analog switch ic with CD4052 if you are looking for variants. It has an internal resistance of 240Ohm. Please refer to the datasheets for 16 pins functions. An abnormal situation would be for the switch device to be supplied with a voltage greater than 20V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 3V is the lowest voltage the electrical component should receive. It would be sufficient to run this analogue multiplexer with 80nA current. Despite this switch device's dual supply capability, its voltage should not exceed 9V. When using dual power supplies, you should attach at least 2.5V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. 18V operating voltages can be used with this electrical part. There are 8 inputs to be operated. It is possible to transfer data over a 25MHz-bandwidth. This electronic component presents a Drain to Source resistance of 125Ohm. 4-bits are supported.

CD4052BE Features


4 Channels
Switch Circuit: SP4T
80nA Supply Current
Bandwidth: 25MHz
Drain-to-Source resistance: 125Ohm
4-Bit

CD4052BE Applications


There are a lot of Texas Instruments CD4052BE Analog Switches & Multiplexers ICs applications.

  • High-Voltage
  • Intelligent PBX
  • Relay replacements
  • Isolation
  • Avionics and Military Systems
  • USB 1.1 signal switching circuits
  • Central office
  • Communications systems
  • Industrial control systems
  • Battery Powered Instruments
999
In-stock
Get Quote
TS5A23157DGST Ultralife

TS5A23157DGST Overview


The electronic component is convenient to ship overseas because it is packed in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -40°C~85°C TA extended. In total, there are 10 terminations. High-quality output is provided by the electronic component's 2 channels. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. This electrical component is included in the 10 series of products. Unlike digital switches, these are based on SPDT switching circuits. Use TS5A23157 to search for variants of the digital switches. In this multiplexer, the internal resistance is 10Ohm. To find out what the 10 pins do, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Single supply type digital switch with a low cost. The lowest voltage the electronic part should receive is 1.8V. 1μA current would be enough for this multiplexer to operate. Using only a single voltage supply, this analog switch requires 1.65V~5.5V voltage. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. In order to operate the 2 inputs, there are several steps to follow. 220MHz-bandwidths can be used to transfer data between multiplexers. Additional features of the electronic component include: VIDEO APPLICATION. There is 10Ohm Drain to Source resistance on this electronic part. This digital multiplexer has 4 outputs.

TS5A23157DGST Features


2 Channels
Switch Circuit: SPDT
1μA Supply Current
Bandwidth: 220MHz
Additional Features: VIDEO APPLICATION
Drain-to-Source resistance: 10Ohm

TS5A23157DGST Applications


There are a lot of Texas Instruments TS5A23157DGST Analog Switches & Multiplexers ICs applications.

  • Video switching
  • Relay replacements
  • Frame Relay Equipment
  • Cellular phones
  • Industrial
  • Medical
  • Precision instrumentation
  • Video signal routing
  • RGB switches
  • Audio and video switching
999
In-stock
Get Quote
SN74HC4066N Ultralife

SN74HC4066N Overview


Due to its 14-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tube. Mounted in Through Hole is this multiplexer. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. Total terminations are 14. A high-quality output is provided by the electrical component's 4 channels. A 4.5V voltage supply should turn on and run the electronic component. The electronic part body is injected with 14 pins. Circuits based on SPST - NO switching are used to construct these analog switch ics. Search with 74HC4066 if you are looking for analog multiplexer variants. This digital multiplexer has 30Ohm internal resistance. The functions of 14 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Multiplexers should not be powered above 6V in normal situations. Analogue multiplexers of the Single supply type that are cost-effective. 2V is the lowest voltage the electrical component should receive. An operating current of 2μA would be sufficient for this switch device. The voltage required by this switch device is 2V~6V, draining from a single voltage supply. When the digital multiplexer is charged above 2μA, damage can occur. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. 5V operating voltages are supported by the electronic component. There are various bandwidths available for data transfer. The Drain to Source resistance of this electronic component is 30Ohm.

SN74HC4066N Features


4 Channels
Switch Circuit: SPST - NO
2μA Supply Current
Bandwidth: 30MHz
Drain-to-Source resistance: 30Ohm

SN74HC4066N Applications


There are a lot of Texas Instruments SN74HC4066N Analog Switches & Multiplexers ICs applications.

  • Fault Tolerant Systems
  • High-Voltage
  • Communication systems
  • SDH
  • Automotive applications
  • Digital Cross-Connects
  • Residential Gateways, Home Gateway/Router
  • Medical systems
  • Channel Banks
  • Audio/video switches
999
In-stock
Get Quote
TS12A12511DGKR Ultralife

TS12A12511DGKR Overview


The electrical component comes in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) packaging, which makes it convenient to ship overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 2:1. Operation at a temperature around -40°C~85°C TA. In total, there have been 8 terminations. Due to its 1 channels, the electrical component produces high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. An electrical component like this is included in the 8 series. Based on SPDT switching circuits, these analog multiplexers work. Search with TS12A12511 if you are looking for analog multiplexer variants. The internal resistance of this digital multiplexer is 8Ohm. For functions related to 8 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 12V. The digital multiplexer has a low cost Dual, Single supply. 2.7V is the lowest voltage that should be fed to the electronic electronic part. This multiplexer would work with 70nA current. A digital multiplexer may suffer damage if voltage is applied above 1μA. There is no problem with using dual supply voltage, but it should not exceed 6V. For dual power supplies, a voltage of at least 2.7V should be attached. The 1 inputs need to be operated in order to work. 93MHz bandwidths enable data to be transferred. This electronic component presents a Drain to Source resistance of 8Ohm. The analog switch ics has 2 outputs.

TS12A12511DGKR Features


1 Channels
Switch Circuit: SPDT
70nA Supply Current
Bandwidth: 93MHz
Drain-to-Source resistance: 8Ohm

TS12A12511DGKR Applications


There are a lot of Texas Instruments TS12A12511DGKR Analog Switches & Multiplexers ICs applications.

  • Communication systems
  • Automotive applications
  • Residential Gateways, Home Gateway/Router
  • Routers
  • Microprocessor Controlled Analog Systems
  • SDH
  • Fault Tolerant Systems
  • Medical Instrumentation
  • Fiber to the Home
  • Precision instrumentation
999
In-stock
Get Quote
TS5A22364DGSR Ultralife <h3>TS5A22364DGSR Overview</h3><div><br/>Presented in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), this electrical component is convenient for overseas shipping. Advanced packaging method Tape &amp; Reel (TR) is used to provide high reliability. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 2:1. Operating temperature around -40°C~85°C TA extended. In total, there are 10 terminations. Due to its 1 channels, the electrical component produces high-quality output. With a 2.5V voltage supply, the electrical component should be turned on and run. 10 pins are injected to the electronic part body. Unlike digital switches, these &nbsp;are based on SPDT switching circuits. Use TS5A22364 to search for variants of the digital switches. This digital multiplexer has 650mOhm internal resistance. For functions related to 10 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. Analog switch ics with Single supply type are cost-effective. 2.3V should be the lowest voltage fed to the electronic component. This digital switch can be operated with a current of 200nA. Analogue multiplexers require a 2.3V~5.5V voltage to drain from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 3.3μA. Operating the 2 inputs requires 2 inputs. 18.3MHz bandwidths enable data to be transferred. A analog switch ics with 4 outputs is included. <br/><br/></div><h3>TS5A22364DGSR Features</h3><div><br/>1 Channels<br/>Switch Circuit: SPDT<br/>200nA Supply Current<br/>Bandwidth: 18.3MHz<br/><br/></div><h3>TS5A22364DGSR Applications</h3><div><br/>There are a lot of Texas Instruments TS5A22364DGSR Analog Switches &amp; Multiplexers ICs applications. <br/><br/></div><ul style="padding: 0px; margin: 0px;"><li>Cable Modem<!--<li--></li><li>Wireless Local Loop<!--<li--></li><li>SDH<!--<li--></li><li>Ultrasound<!--<li--></li><li>DSUs<!--<li--></li><li>Intelligent PBX<!--<li--></li><li>Multiplexers<!--<li--></li><li>Audio/video switches <!--<li--></li><li>Data switching<!--<li--></li><li>Frame Relay Equipment<!--<li--></li></ul>
999
In-stock
Get Quote
TS3A4751PWR Ultralife

TS3A4751PWR Overview


As the electronic part is packed in 14-TSSOP (0.173, 4.40mm Width), international shipping is convenient. The advanced packaging method Tape & Reel (TR) provides high reliability. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Increasing operating temperature to around -40°C~85°C TA. Totally, there are 14 terminations. This electronic part offers high-quality output due to its 4 channels. With a 1.8V voltage supply, the electrical component should be turned on and run. There are 14 pins injected into the electronic part body. Circuits based on SPST - NO switching are used to construct these analog switch ics. Use TS3A4751 to search for variants of the digital switches. An switch multiplexer with 900mOhm internal resistance has a value of 900mOhm. To find out what the functions of 14 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users shouldn't supply more than 3.6V voltage to the switch device. Digital switch that provides Single power at a cost-effective price. The lowest voltage fed to the electronic component should be 1.6V. An analogue multiplexer drains from a single voltage supply at 1.6V~3.6V. Putting voltage greater than 75nA on the multiplexer may cause damage. There is a voltage range of 3V operating voltages for the electrical part. Among the inputs that can be operated are the 4 inputs. There are various bandwidths available for data transfer. It has a Drain to Source resistance of 900mOhm ohms.

TS3A4751PWR Features


4 Channels
Switch Circuit: SPST - NO
Bandwidth: 125MHz
Drain-to-Source resistance: 900mOhm

TS3A4751PWR Applications


There are a lot of Texas Instruments TS3A4751PWR Analog Switches & Multiplexers ICs applications.

  • Communications systems
  • Battery-powered systems
  • MP3 players
  • Channelized and Unchannelized DS3 applications
  • Signal routing between systems
  • Digital access cross connects
  • Microwave transmission systems
  • Medical systems
  • 65 V DACs
  • Microprocessor Controlled Analog Systems
999
In-stock
Get Quote
SN74LVC1G3157DCKR Ultralife

SN74LVC1G3157DCKR Overview


Shipping overseas is convenient with the electronic component packed in 6-TSSOP, SC-88, SOT-363. High reliability is achieved by using advanced packaging method Cut Tape (CT). The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Operation at a temperature around -40°C~125°C TA. Total terminations are 6. The electronic part delivers high-quality output through its 1 channels. A 2.3V voltage supply should turn on and run the electronic component. This electrical component is included in the 6 series of products. Circuits based on SPDT switching are used to construct these analog switch ics. There are 1 circuits in this switch device. Use 74LVC1G3157 to search for variants of the digital switches. As far as internal resistance is concerned, it has 15Ohm. Please refer to the datasheets for 6 pins functions. There is a standard Multiplexers or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Single supply type digital switch with a low cost. The lowest voltage the electronic part should receive is 1.65V. It would be sufficient to run this analogue multiplexer with 1μA current. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 10μA. In order to operate the 2 inputs, there are several steps to follow. There are various bandwidths available for data transfer. There is 11Ohm resistance between Drain and Source for this electronic part.

SN74LVC1G3157DCKR Features


1 Channels
Switch Circuit: SPDT
1μA Supply Current
Bandwidth: 300MHz
Drain-to-Source resistance: 11Ohm

SN74LVC1G3157DCKR Applications


There are a lot of Texas Instruments SN74LVC1G3157DCKR Analog Switches & Multiplexers ICs applications.

  • DSUs
  • SDH/SONET multiplexers
  • Cable PC
  • High-Voltage
  • Industrial control systems
  • Audio and video routing
  • E1 Multiplexer
  • Relay Replacement
  • Industrial
  • Transmit
999
In-stock
Get Quote
SN74LV4053APWR Ultralife

SN74LV4053APWR Overview


Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~85°C TA. In total, 16 terminations have occurred. High-quality output is provided by the electronic component's 2 channels. A 2.3V voltage supply should turn on and run the electronic component. This electronic part can be found in the 16 series. SPDT switching circuits are used in these analog switch ics. A 3 circuit is present in this switch device. 74LV4053 can be used to search for analog multiplexer variants. There is 100Ohm internal resistance in this digital multiplexer. You can find the functions of the 16 pins in the datasheets. This switch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Digital switch that provides Single power at a cost-effective price. 2V should be the lowest voltage fed to the electronic component. For this digital switch to work, 20μA current would suffice. This analogue multiplexer requires a voltage of 2V~5.5V when it drains from a single voltage supply. It is possible to operate 6 inputs. The data can be transferred over a wide range of bandwidths, called 50MHz bandwidths. There is 100Ohm Drain to Source resistance on this electronic part.

SN74LV4053APWR Features


2 Channels
Switch Circuit: SPDT
20μA Supply Current
Bandwidth: 50MHz
Drain-to-Source resistance: 100Ohm

SN74LV4053APWR Applications


There are a lot of Texas Instruments SN74LV4053APWR Analog Switches & Multiplexers ICs applications.

  • Avionics test equipment
  • Cellular phones
  • Relay replacements
  • Access Concentrators
  • Fault Tolerant Systems
  • Private Branch Exchange (PBX)
  • Medical systems
  • Data switching
  • RGB switches
  • Routers
999
In-stock
Get Quote
SN74LVC2G66DCUR Ultralife

SN74LVC2G66DCUR Overview


The electronic component is convenient to ship overseas because it is packed in a 8-VFSOP (0.091, 2.30mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Cut Tape (CT). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature extended to -40°C~85°C TA. A total of 8 terminations have been recorded. High-quality output is provided by the electronic component's 2 channels. With a 2.3V voltage supply, the electrical component should be turned on and run. An electrical component like this is included in the 8 series. On the other hand, analog switches can be constructed using SPST - NO switching circuits. If you are looking for variants of the digital switch, trying search with 74LVC2G66. It has an internal resistance of 10Ohm. For functions related to 8 pins, please refer to the datasheets. It is a typical Multiplexers or Switches analog multiplexer. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Digital switch that provides Single power at a cost-effective price. 1.65V is the lowest voltage the electrical component should receive. It would be sufficient to run this analogue multiplexer with 10μA current. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. Put voltage above 100nA on the multiplexer to cause damage. This switch operates within the bandwidth of 195MHz. There is 12.5Ohm resistance between Drain and Source for this electronic part.

SN74LVC2G66DCUR Features


2 Channels
Switch Circuit: SPST - NO
10μA Supply Current
-3db Bandwidth: 300MHz
Bandwidth: 195MHz
Drain-to-Source resistance: 12.5Ohm

SN74LVC2G66DCUR Applications


There are a lot of Texas Instruments SN74LVC2G66DCUR Analog Switches & Multiplexers ICs applications.

  • Audio and video routing
  • RGB switches
  • FTTH
  • MP3 players
  • Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
  • Isolation
  • Residential Gateways, Home Gateway/Router
  • Existing multiplexer applications (both fault-protected and nonfault-protected)
  • E1 Multiplexer
  • Remote Powered Equipment
999
In-stock
Get Quote
CD4051BM96 Ultralife

CD4051BM96 Overview


Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Cut Tape (CT). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 8:1. Around -55°C~125°C TA is the extended operating temperature. In total, there are 16 terminations. As a result of its 8 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. This electrical component is included in the 16 series of products. A 1 circuit is present in this switch device. Using the CD4051 search parameter, you can discover variants of the switch. It has an internal resistance of 240Ohm. You can find the functions of the 16 pins in the datasheets. In normalcircumstances, users should not exceed 20V volts for the multiplexer. The digital multiplexer has a low cost Dual, Single supply. A low voltage of 3V should be applied to the electronic component. For this multiplexer to operate, 80nA current would be sufficient. For this multiplexer, dual supply voltage is feasible, but it should not exceed 9V. With dual power supplies, you should attach at least 2.5V. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. Operating voltages range from 18V. There are 8 inputs to be operated. There are 20MHz bandwidths for data transfer.

CD4051BM96 Features


8 Channels
80nA Supply Current
Bandwidth: 20MHz

CD4051BM96 Applications


There are a lot of Texas Instruments CD4051BM96 Analog Switches & Multiplexers ICs applications.

  • Communications systems
  • Precision instrumentation
  • Digital Cross-Connects
  • CSU
  • Remote wireless modules
  • Mechanical reed relay replacement
  • Microprocessor Controlled Analog Systems
  • Channelized and Unchannelized DS3 applications
  • Multi-Line E1 Interface Cards
  • Audio and video switching
999
In-stock
Get Quote
CD4053BPWR Ultralife

CD4053BPWR Overview


The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). To ensure high reliability, a new packaging method Cut Tape (CT) is used. Multiplexers like this are mounted in the Surface Mount position. 2:1 is the number of circuits in the multiplexer and demultiplexer. An extended operating temperature of -55°C~125°C TA degrees Celsius. In total, there have been 16 terminations. The electronic part delivers high-quality output through its 2 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. Into the electrical component body are injected 16 pins. SPDT switching circuits are used in these analog switch ics. It consists of 3 circuits. Try searching with CD4053 to find analog multiplexer variants. It has an internal resistance of 240Ohm. You can find the functions of the 16 pins in the datasheets. Theswitch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 20V. Digital switch that provides Dual, Single power at a cost-effective price. The lowest voltage fed to the electronic component should be 3V. For this digital switch to work, 80nA current would suffice. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 9V. When using dual power supplies, you should attach at least 2.5V. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. This analog switch ic utilizes SEPARATE OUTPUT output. A voltage of 18V can be used to operate the electronic component. The electrical component supports 6 inputs. The transfer of data can be performed over 30MHz bandwidths. This electronic component presents a Drain to Source resistance of 240Ohm.

CD4053BPWR Features


2 Channels
Switch Circuit: SPDT
80nA Supply Current
Bandwidth: 30MHz
Drain-to-Source resistance: 240Ohm

CD4053BPWR Applications


There are a lot of Texas Instruments CD4053BPWR Analog Switches & Multiplexers ICs applications.

  • Avionics and Military Systems
  • Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
  • High speed data transmission line cards
  • Medical systems
  • Remote wireless modules
  • Cellular phones
  • Microwave transmission systems
  • Battery Powered Instruments
  • Audio/video switches
  • SONET/SDH ADM
999
In-stock
Get Quote
TS5A3166DBVR Ultralife

TS5A3166DBVR Overview


The electronic part can be shipped overseas conveniently because it is packaged in SC-74A, SOT-753. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 1:1. Operational temperature extended around -40°C~85°C TA. Total terminations are 5. High-quality output is provided by the electronic component's 1 channels. It is safe to turn on and run the electronic component with a 1.8V voltage supply. As part of its design, the 5 series is equipped with this electronic component. Based on SPST - NO switching circuits, these analog multiplexers work. Try searching with TS5A3166 if you're looking for variants. The internal resistance of this digital multiplexer is 900mOhm. To find out what the functions of 5 pins are, please refer to their datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. A analog switch ic that has a cost-effective Single supply type. It is recommended to use 1.65V as the lowest voltage for the electrical part. This digital switch can be operated with a current of 10nA. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. The switch multiplexer may be damaged if it is exposed to voltage greater than 100nA. This switch operates within the bandwidth of 200MHz. There is 900mOhm resistance between Drain and Source for this electronic part.

TS5A3166DBVR Features


1 Channels
Switch Circuit: SPST - NO
10nA Supply Current
Bandwidth: 200MHz
Drain-to-Source resistance: 900mOhm

TS5A3166DBVR Applications


There are a lot of Texas Instruments TS5A3166DBVR Analog Switches & Multiplexers ICs applications.

  • Isolation
  • Cell phones
  • Avionics test equipment
  • New designs requiring multiplexer functions
  • Automatic test equipment
  • Channel Banks
  • Existing multiplexer applications (both fault-protected and nonfault-protected)
  • Battery Powered Instruments
  • E1 Multiplexer
  • Precision data acquisition
999
In-stock
Get Quote
CD4052BM96 Ultralife

CD4052BM96 Overview


Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Cut Tape (CT). In Surface Mount, you'll find this switch device. 4:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to -55°C~125°C TA. Total terminations are 16. A 4 channel electronic part produces high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. As part of its design, the 16 series is equipped with this electronic component. Based on SP4T switching circuits, these analog multiplexers work. A total of 2 circuits make up this switch device. Try searching with CD4052 if you're looking for variants. Analog switches have 240Ohm internal resistance. Datasheets for functions of 16 pins are available. Theswitch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 20V. The analog switch ic is of the Dual, Single supply type and is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 3V. For this digital switch to work, 80nA current would suffice. Despite this switch device's dual supply capability, its voltage should not exceed 9V. When using dual power supplies, you should attach at least 2.5V. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. It can operate from 18V operating voltages. The 8 inputs need to be operated in order to work. The data can be transferred over a wide range of bandwidths, called 25MHz bandwidths. The Drain to Source resistance of this electronic component is 240Ohm. It can conduct in a 4-bit manner.

CD4052BM96 Features


4 Channels
Switch Circuit: SP4T
80nA Supply Current
Bandwidth: 25MHz
Drain-to-Source resistance: 240Ohm
4-Bit

CD4052BM96 Applications


There are a lot of Texas Instruments CD4052BM96 Analog Switches & Multiplexers ICs applications.

  • ISDN NT1/TA
  • Fault Tolerant Systems
  • Power routing
  • Residential Gateways, Home Gateway/Router
  • SONET/SDH ADM
  • PBX interfaces
  • Battery Powered Instruments
  • High-Voltage
  • Precision instrumentation
  • Medical systems
999
In-stock
Get Quote
CD4051BPWR Ultralife

CD4051BPWR Overview


Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Cut Tape (CT). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 8:1. Extended operating temperature around -55°C~125°C TA. In total, there are 16 terminations. As a result of its 8 channels, this electronic component provides high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. The electrical component body receives 16 pins. It consists of 1 circuits. Search with CD4051 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 240Ohm. The datasheets for the 16 pins explain the functions. In a normalsituation, users should not supply the switches with voltage higher than 20V. Analog switch ics with Dual, Single supply type are cost-effective. 3V should be the lowest voltage fed to the electronic component. The analogue multiplexer may be damaged if voltage is greater than 100μA. For this switch, a dual supply voltage is feasible, but it must not exceed 9VIt is recommended that you attach at least 2.5V to your dual power supply. This analog switch ic utilizes SEPARATE OUTPUT output. Operating voltages of 18V are compatible with the electrical part. The electrical component supports 8 inputs. A 20MHz-bandwidth can be used for data transfer. This electronic component presents a Drain to Source resistance of 240Ohm.

CD4051BPWR Features


8 Channels
Bandwidth: 20MHz
Drain-to-Source resistance: 240Ohm

CD4051BPWR Applications


There are a lot of Texas Instruments CD4051BPWR Analog Switches & Multiplexers ICs applications.

  • PBXs
  • Sample hold systems
  • Digital cross connects (DSX-1)
  • Digital Cross-Connects
  • Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
  • Data switching
  • Cable PC
  • FTTH
  • Modems
  • Ultrasound
999
In-stock
Get Quote
TS5A3166DCKR Ultralife

TS5A3166DCKR Overview


Shipping overseas is convenient due to the electrical component's packing in 5-TSSOP, SC-70-5, SOT-353. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 1:1. Operation at a temperature around -40°C~85°C TA. 5 terminations have been made so far. A 1 channel electronic part produces high-quality output. A 1.8V voltage supply should turn on and run the electronic component. The electronic part body is injected with 5 pins. SPST - NO switching circuits are used in these analog switch ics. Try searching with TS5A3166 if you're looking for variants. Analog switches have 900mOhm internal resistance. To find out what the functions of 5 pins are, please refer to their datasheets. It is a typical Multiplexer or Switches analog multiplexer. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Single supply type digital switch with a low cost. There should be 1.65V voltage fed to the electrical part below 1.65V. The switch device would be able to operate with 10nA current. Using only a single voltage supply, this analog switch requires 1.65V~5.5V voltage. When the digital multiplexer is charged above 100nA, damage can occur. In 200MHz-bandwidths, data can be transferred. There is 900mOhm resistance between Drain and Source for this electronic part.

TS5A3166DCKR Features


1 Channels
Switch Circuit: SPST - NO
10nA Supply Current
Bandwidth: 200MHz
Drain-to-Source resistance: 900mOhm

TS5A3166DCKR Applications


There are a lot of Texas Instruments TS5A3166DCKR Analog Switches & Multiplexers ICs applications.

  • DSLAMs
  • Channel Banks
  • Data Acquisition Systems
  • T1/E1 Terminals
  • DVD-R
  • Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
  • Ultrasound
  • SONET/SDH ADM
  • Low-Voltage
  • Industrial control systems
999
In-stock
Get Quote
SN74HC4851PWR Ultralife

SN74HC4851PWR Overview


As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Temperatures around -40°C~125°C TA are extended for operation. In total, there have been 16 terminations. Due to its 1 channels, the electrical component produces high-quality output. With a 3V voltage supply, the electrical component should be turned on and run. The electrical component body receives 16 pins. A total of 1 circuits make up this switch device. Look for analog switch ic variants by searching with 74HC4851. A 195Ohm internal resistance characterizes this multiplexer. You can find the functions of the 16 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Multiplexers should not be powered above 6V in normal situations. A cost-effective Single supply type analogue multiplexer. It is recommended that the electrical component receives a voltage of 2V. 2μA current would be enough for this multiplexer to operate. Analogue multiplexers require a 2V~6V voltage to drain from a single voltage supply. Operating 8 inputs is required.

SN74HC4851PWR Features


1 Channels
2μA Supply Current

SN74HC4851PWR Applications


There are a lot of Texas Instruments SN74HC4851PWR Analog Switches & Multiplexers ICs applications.

  • Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
  • PBX interfaces
  • T1/E1 Terminals
  • PDH Multiplexers
  • Frame Relay Equipment
  • Digital access cross connects
  • Battery Powered Instruments
  • Battery Powered Systems
  • Intelligent PBX
  • E1 Multiplexer
999
In-stock
Get Quote
TS5A4624DCKR Ultralife

TS5A4624DCKR Overview


Presented in 6-TSSOP, SC-88, SOT-363, this electrical component is convenient for overseas shipping. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, this analog switch is mounted. 2:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~85°C TA. 6 terminations have been made so far. A electrical component with 1 channels is capable of high-quality output. If the voltage supply is 1.8V volts, the electrical component should be turned on and run. An electrical component like this is included in the 6 series. Unlike digital switches, these are based on SPDT switching circuits. Look for analog switch ic variants by searching with TS5A4624. Internally, this switch multiplexer has a resistance of 900mOhm. To find out what the 6 pins do, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. Digital switch that provides Single power at a cost-effective price. 1.65V is the lowest voltage the electrical component should receive. This digital switch can be operated with a current of 10nA. An analogue multiplexer drains from a single voltage supply at 1.65V~5.5V. When the digital multiplexer is charged above 50nA, damage can occur. 100MHz bandwidths enable data to be transferred. The analog switch ics has 2 outputs.

TS5A4624DCKR Features


1 Channels
Switch Circuit: SPDT
10nA Supply Current
-3db Bandwidth: 90MHz
Bandwidth: 100MHz

TS5A4624DCKR Applications


There are a lot of Texas Instruments TS5A4624DCKR Analog Switches & Multiplexers ICs applications.

  • Ultrasound
  • Signal routing between systems
  • Automatic test equipment
  • Imaging
  • Audio and video routing
  • Medical Instrumentation
  • HDTV
  • Audio/video switches
  • Cell phones
  • Routers
999
In-stock
Get Quote
TS5A2066DCUR Ultralife

TS5A2066DCUR Overview


The electrical component comes in 8-VFSOP (0.091, 2.30mm Width) packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -40°C~85°C TA. Total terminations are 8. Due to its 2 channels, the electrical component produces high-quality output. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. Into the electrical component body are injected 8 pins. A SPST - NO switching circuit is used for these analog switches. Look for analog switch ic variants by searching with TS5A2066. As far as internal resistance is concerned, it has 15Ohm. Datasheets for functions of 8 pins are available. This switch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. Analog switch ics with Single supply type are cost-effective. A low voltage of 1.65V should be applied to the electronic component. It would be sufficient to run this analogue multiplexer with 100nA current. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. Operating the 2 inputs requires 2 inputs. 300MHz bandwidths enable data to be transferred. It can conduct 1-bit signals.

TS5A2066DCUR Features


2 Channels
Switch Circuit: SPST - NO
100nA Supply Current
Bandwidth: 300MHz
1-Bit

TS5A2066DCUR Applications


There are a lot of Texas Instruments TS5A2066DCUR Analog Switches & Multiplexers ICs applications.

  • Private Branch Exchange (PBX)
  • PCMCIA cards
  • Microprocessor controlled systems
  • Sample hold systems
  • Intelligent PBX
  • Industrial and process control systems
  • Battery Powered Instruments
  • Fiber to the Home
  • E1 Multiplexer
  • Medical
999
In-stock
Get Quote
TS5A23157DGSR Ultralife

TS5A23157DGSR Overview


The electrical component comes in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) packaging, which makes it convenient to ship overseas. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 2:1 is the ratio of multiplexer to demultiplexer circuits. Temperatures around -40°C~85°C TA are extended for operation. A total of 10 terminations have been recorded. By its 2 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 1.8V voltage supply. The electrical component body receives 10 pins. Unlike digital switches, these are based on SPDT switching circuits. Try searching for TS5A23157 variants of the analog switch ic. Analog switches have 10Ohm internal resistance. To find out what the 10 pins do, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Digital switch that provides Single power at a cost-effective price. A low voltage of 1.8V should be applied to the electronic component. It would be sufficient to run this analogue multiplexer with 1μA current. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 1μA. A 220MHz-bandwidth can be used for data transfer. Don't miss this electronic component's additional features, such as: VIDEO APPLICATION. The analogue multiplexer has 4 outputs.

TS5A23157DGSR Features


2 Channels
Switch Circuit: SPDT
1μA Supply Current
Bandwidth: 220MHz
Additional Features: VIDEO APPLICATION

TS5A23157DGSR Applications


There are a lot of Texas Instruments TS5A23157DGSR Analog Switches & Multiplexers ICs applications.

  • Audio/video switches
  • Cross Connects
  • Transmit
  • Digital access cross connects
  • T1/E1 Terminals
  • Video signal routing
  • Fiber to the Home
  • 65 V DACs
  • Battery Powered Systems
  • Signal routing between systems
999
In-stock
Get Quote

Please send RFQ , we will respond immediately.