Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Ultralife | SN74CBT3253D OverviewFor the purpose of saving board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).The package is packaged in accordance with Tube.Mounting is performed using Surface Mount.The multiplexers uses an analog IC Multiplexer/Demultiplexer as the analog part of the circuit.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.Multiplexers of the 74CBT series can be used in a wide range of applications.As parts of its basic configuration, 16 terminations are desgined.The part number for 74CBT3253 can be used to find its logic switch related parts as well.For multiplexer's system, a voltage of 5V is supplied.This turn signal switch has 16 component pins.As a result, conductors end at GULL WING.There is a type of supply of Single.There are 16 pins on it.The mount is in Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.Signal multiplexer contains 8 bits.In order to maintain mux switch's normal operation, power is provided to 5V.As a result, the turn signal switch consists of 4 outputs.This is a signal switch that is categorized as Other Logic ICs.In the absence of external influences, it consumes 3μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The resistance of the signal switching is 15Ohm.For transmission, there are 2 channels in the turn signal switch's circuit.In addition, it provides improved features of TTL COMPATIBLE MUX/DMUX SWITCH.When 3μA is delivered to the load, stability of the multiplexers can be maintained. SN74CBT3253D FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V TTL COMPATIBLE MUX/DMUX SWITCH Operating with the supply current of 3μA SN74CBT3253D ApplicationsThere are a lot of Texas Instruments SN74CBT3253D Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LS153D OverviewThe reason it is provided is that the board space can be saved by placing digital switch in the 16-SOIC (0.154, 3.90mm Width).It is packaged according to the Tube method.Mounting is performed using Surface Mount.The analog IC used in the multiplexers can be referred to as Multiplexer.By maintaining the operating temperature at 0°C~70°C, turn signal switch will not be affected by external factors.Using a 4.75V~5.25V supply voltage provides digital controlled switch's superior flexibility for designers.Since they are members of the 74LS series, they can be used in a wide variety of applications.Among its basic features are 16 terminations.Its logic switch base part number is 74LS153 which can also be used to find its logic switch related parts.The multiplexer's system is powered by 5V volts.A component pin count of 16 can be found on this turn signal switch.GULL WING represents the end of conductors.The supply type of this multiplexer ic is Single.The board has 16 pins configured.It is mounted in the way of Surface Mount.The logic switch is included into the family of LS.The multiplexer ic provides 4 bits.It is provided that 5V has a power supply in order to function normally.As part of the operation of this turn signal switch, there are 1 outputs.Without the influence of external factors, it consumes 6.2mA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.This multiplexer has 8 inputs.The turn signal switch's circuit consists of 2 channels that are being used for transmission in the circuit. SN74LS153D FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74LS153D ApplicationsThere are a lot of Texas Instruments SN74LS153D Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
APS | SY89473UMG OverviewDigital switch is provided in the 24-VFQFN Exposed Pad, 24-MLF? for the purpose of saving board space.The package is packaged in the manner of Tube.digital switch ic uses the method of Surface Mount for mounting.In the multiplexers, the analog IC is indicated by Multiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When operated with a 2.375V~2.625V 3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Since they are members of the Precision Edge? series, they can be used in a wide variety of applications.As part of its basic configuration, 24 terminations are designed as a part of it.Its logic switch base part number is 89473 which can also be used to find its logic switch related parts.The voltage supplied for multiplexer's system is 2.5V.multiplexer's systemThere is a type of supply of Single.The board has 24 pins configured.This unit is mounted in the way of Surface Mount.The turn signal switch has 2 outputs.No external influence consumes 65mA current of multiplexer ic.Additionally, ALSO OPERATES AT 3.3V SUPPLY provides improved characteristics. SY89473UMG FeaturesSupplied in the 24-VFQFN Exposed Pad, 24-MLF? package Adopting a supply type of Single ALSO OPERATES AT 3.3V SUPPLY SY89473UMG ApplicationsThere are a lot of Microchip Technology SY89473UMG Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74145N OverviewDue to the lack of space on the board, digital switch is provided in the 16-DIP (0.300, 7.62mm).It is packaged according to the Tube method.In terms of mounting, digital switch ic uses the Through Hole method .Decoder is the analog IC that the multiplexers uses.The operating temperature will not be affected by external factors when turn signal switch is set to 0°C~70°C.Designers have greater flexibility when digital controlled switch operates at a 4.75V~5.25V supply voltage.Since they are members of the 7400 series, they can be used in a wide variety of applications.As part of its basic configuration, 16 terminations are designed as a part of it.The base part number is SN74145, so you can find its logic switch related parts using that number.In this case, 5V is the voltage supplied to the multiplexer's system.A component pin count of 16 is found on this turn signal switch.In this case, Single is employed as the supply type.This multiplexer ic has 16 pins configured.The multiplexer ic is mounted in the direction of Through Hole.The TTL/H/L family includes the logic switch.As a result, signal multiplexer provides 10 bits.Normally, 5V is powered by a battery.In order for the turn signal switch to work, there are 10 outputs.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.This multiplexer has 4 inputs.Furthermore, the characteristics of ION MAX=80MA @ VOL MAX=0.9V have been improved.It contains 1 elements in mux switch configuration.When 43mA is delivered to the load, stability of the multiplexers can be maintained. SN74145N FeaturesSupplied in the 16-DIP (0.300, 7.62mm) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V ION MAX=80MA @ VOL MAX=0.9V Operating with the supply current of 43mA SN74145N ApplicationsThere are a lot of Texas Instruments SN74145N Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
APS | SY89840UMG OverviewDue to the fact that it is provided in the 16-VFQFN Exposed Pad, 16-MLF?, digital switch allows the board to be compacted.In this case, it is packaged as Tube.In terms of mounting, digital switch ic uses the method of Surface Mount.The analog IC used in the multiplexers can be referred to as Multiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Using a 2.375V~2.625V 3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of Precision Edge? series.The basic configuration includes 16 terminations.In addition, it also has a base part number of 89840, which can be used to find related parts.For multiplexer's system, 2.5V voltage is supplied.Its supply type is Single, which is used as the source of power.The board is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.The turn signal switch operates with 1 outputs.It consumes 95mA current of multiplexer ic since it is not affected by external factors.The multiplexers have 2 input lines used to accept voltage levels.In addition, ALSO OPERATES AT 3.3V SUPPLY provides improved characteristics. SY89840UMG FeaturesSupplied in the 16-VFQFN Exposed Pad, 16-MLF? package Adopting a supply type of Single 2 input lines ALSO OPERATES AT 3.3V SUPPLY SY89840UMG ApplicationsThere are a lot of Microchip Technology SY89840UMG Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
APS | SY89844UMG OverviewIt is included in the 24-VFQFN Exposed Pad, 24-MLF? in order to save board space.As a result, it is packaged in the way of Tube.Digital switch ic adheres to a mounting method of Surface Mount.the multiplexers uses an analog IC Multiplexer.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.With a supply voltage of 2.375V~2.625V, designers have greater flexibility of digital controlled switch.With the Precision Edge? series, the multiplexers are suitable for a diverse range of applications.As parts of its basic configuration, 24 terminations are desgined.The part number for 89844 can be used to find its logic switch related parts as well.In this case, 2.5V is the voltage supplied to the multiplexer's system.As a type of supply, Single is employed.A configuration of 24 pins is used.The mounting point is Surface Mount.The turn signal switch contains 1 outputs designed to operate.Supply voltages of 2.5V can provide reliable performance of the multiplexers.A total of 2 transmission channels are available in the turn signal switch's circuit. SY89844UMG FeaturesSupplied in the 24-VFQFN Exposed Pad, 24-MLF? package Adopting a supply type of Single Operating with the supply voltage of 2.5V SY89844UMG ApplicationsThere are a lot of Microchip Technology SY89844UMG Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CB3T3257PW OverviewIt is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save board space.As a result, it is packaged in a way that is referred to as Tube.For mounting, digital switch ic uses the method Surface Mount.In the multiplexers, the analog IC is indicated by Multiplexer/Demultiplexer.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74CB series, these multiplexers have a wide range of applications.It is designed with 16 terminations as part of its basic configuration.As its base part number is 74CB3T3257, logic switch can also be used to find its related parts.In this case, 2.5V is the voltage supplied to the multiplexer's system.In this turn signal switch, there are 16 components that can be connected to each pin.It is the end of conductors that is represented by GULL WING.There is a type of supply of Single.A total of 16 pins are configured on this board.It is positioned in the direction of Surface Mount.There is a family of CB3T/3VT members.Signal multiplexer contains 4 bits.The minimal supply voltage (Vsup) should be kept at 2.3V to avoid some unnecessary failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.It is provided that 2.5/3.3V has a power supply in order to function normally.As a result, the turn signal switch consists of 2 outputs.Without the influence of external factors, it consumes 20μA current of multiplexer ic.A multiplexer such as this has 8 inputs available.A resistance of 8Ohm is used to operate it. SN74CB3T3257PW FeaturesSupplied in the 16-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Power supplies of 2.5/3.3V SN74CB3T3257PW ApplicationsThere are a lot of Texas Instruments SN74CB3T3257PW Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
APS | SY100EP56VK4G OverviewThe reason it is provided is that the board space can be saved by placing digital switch in the 20-TSSOP (0.173, 4.40mm Width).Tube is the packaging method.Mounting is performed using Surface Mount.The multiplexers uses an analog IC Differential Digital Multiplexer as the analog part of the circuit.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.When digital controlled switch operates at ±3V~5.5V, designers have superior flexibility.Several applications are possible for 100EP series multiplexers.To find signal switch's related components, a base part number of 100EP56 may also be used.Dual is employed as its supply type.With 20 pins, it is configured.The mount is in Surface Mount.The turn signal switch contains 2 outputs designed to operate.In the absence of external influences, it consumes 65mA current of multiplexer ic.A multiplexer such as this has 4 inputs available.It is possible to accept voltage levels by using one of the 4 input lines of multiplexers.A signal source is provided by 2 output lines.The maximum operating temperature of 85°C is acceptable for this signal switch.A temperature of the multiplexer of -40°C should be maintained for minimal operation.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 5.5V.The digital swith is specified to operate at the minimum supply voltage of 3V in compliance with the applicable device specification. SY100EP56VK4G FeaturesSupplied in the 20-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Dual 4 input lines 2 output lines SY100EP56VK4G ApplicationsThere are a lot of Microchip Technology SY100EP56VK4G Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
APS | SY58028UMG OverviewDue to the lack of space on the board, digital switch is provided in the 32-VFQFN Exposed Pad, 32-MLF?.In this case, it is packaged as Tube.Mounting is performed using Surface Mount.the multiplexers uses an analog IC Multiplexer.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.A supply voltage of 2.375V~2.625V 3V~3.6V provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of Precision Edge? series.The basic configuration of this system includes 32 terminations.The part number for 58028 can be used to find its logic switch related parts as well.For multiplexer's system, a voltage of 2.5V is supplied.In this case, the supply type is Single.It is configured with 32 pins.The mounting point is Surface Mount.As a voltage level input, the multiplexers have 4 lines.In this case, the signal source has a total of 2 output lines.Also, it provides an improved version of the characteristics of SEATED HT-CALCULATED; ALSO OPERATES AT 3.3V SUPPLY. SY58028UMG FeaturesSupplied in the 32-VFQFN Exposed Pad, 32-MLF? package Adopting a supply type of Single 4 input lines 2 output lines SEATED HT-CALCULATED; ALSO OPERATES AT 3.3V SUPPLY SY58028UMG ApplicationsThere are a lot of Microchip Technology SY58028UMG Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | DS25CP114TSQE/NOPB OverviewAs a means of saving space, digital switch is provided in the 40-WFQFN Exposed Pad.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .the multiplexers uses an analog IC Crosspoint Switch.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.Designers have greater flexibility when digital controlled switch operates at a 3V~3.6V supply voltage.There are 40 terminations included in its basic configuration.You can also find related parts by using its logic switch base part number of 25CP114.For multiplexer's system, a voltage of 3.3V is supplied.The supply type of this multiplexer ic is Digital, Dual.This multiplexer ic is configured with 40 pins.It is positioned in the direction of Surface Mount.Multiplexer or Switches is a category for the digital switch ics.When a supply voltage of 3.3V is used, reliable performance of the multiplexers can be achieved. DS25CP114TSQE/NOPB FeaturesSupplied in the 40-WFQFN Exposed Pad package Adopting a supply type of Digital, Dual Operating with the supply voltage of 3.3V DS25CP114TSQE/NOPB ApplicationsThere are a lot of Texas Instruments DS25CP114TSQE/NOPB Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
APS | SY89543LMG OverviewThis is a relatively small item of digital switch that is included in the 32-VFQFN Exposed Pad, 32-MLF? in order to save space on the board.It is packaged according to the Tube method.For mounting, digital switch ic uses the method Surface Mount.the multiplexers uses an analog IC Multiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.The turn signal switch is designed for use with a 3V~3.6V supply voltage, which gives it a lot of flexibility.Since they are members of the Precision Edge? series, they can be used in a wide variety of applications.There is a base part number of 89543 which can also be used in order to locate the logic switch that are related to this item.In this case, the supply type is Single.The board is configured with 32 pins.The multiplexer ic is mounted in the direction of Surface Mount.If the supply voltage is 3.3V, reliable performance of the multiplexers can be achieved.In this case, operating this signal switch at 85°C is acceptable.The minimal operating temperature of the multiplexer should be maintained at -40°C.Based on the device specifications, the signal switches is designed to operate at 3.6V maximum supply voltage.The digital swith is specified to operate at the minimum supply voltage of 3V in compliance with the applicable device specification. SY89543LMG FeaturesSupplied in the 32-VFQFN Exposed Pad, 32-MLF? package Adopting a supply type of Single Operating with the supply voltage of 3.3V SY89543LMG ApplicationsThere are a lot of Microchip Technology SY89543LMG Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | DS10CP152QMA/NOPB OverviewFor the purpose of saving board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).Tape & Reel (TR) is the packaging method.Digital switch ic adheres to a mounting method of Surface Mount.Crosspoint Switch is the analog IC that the multiplexers uses.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 3V~3.6V supply voltage, which gives it a lot of flexibility.Multiplexers of the Automotive, AEC-Q100 series can be used in a wide range of applications.There is a design for terminating 16 as part of its basic configuration.Its logic switch base part number is DS10CP152 which can also be used to find its logic switch related parts.The multiplexer's system is powered by 3.3V volts.As the end of conductors, it uses GULL WING.Single is used as its supply type.This multiplexer ic is configured with 16 pins.It is positioned in the direction of Surface Mount.Multiplexer or Switches is the classification for this the digital switch ic.The performance of the multiplexers can be reliably maintained at a voltage of 3.3V.Stability of the multiplexers can be kept when the supply voltage of 77mA is delivered to the load. DS10CP152QMA/NOPB FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Operating with the supply voltage of 3.3V Operating with the supply current of 77mA DS10CP152QMA/NOPB ApplicationsThere are a lot of Texas Instruments DS10CP152QMA/NOPB Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN65LVCP408PAPT OverviewDigital switch is provided in the 64-PowerTQFP for the purpose of saving board space.The package is packaged in the manner of Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.As the analog part, the circuit uses an analog IC Crosspoint Switch.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.Design engineers have more flexibility when digital controlled switch operates at 3.14V~3.47V voltage.Since they are members of the 65LVCP series, they can be used in a wide variety of applications.As parts of its basic configuration, 64 terminations are desgined.There is a base part number of 65LVCP408 which can also be used in order to locate the logic switch that are related to this item.The voltage supplied for multiplexer's system is 3.3V.multiplexer's systemThere are 64 component pins in this turn signal switch.As a result, conductors end at GULL WING.The supply type of this multiplexer ic is Single.This multiplexer ic has 64 pins configured.Avoid unnecessary failures by keeping Vsup at 3.465V.The digital switch ic is an electronic part classified into Multiplexer or Switches.When a supply voltage of 3.3V is used, reliable performance of the multiplexers can be achieved.A total of 8 channels are used for transmission in the turn signal switch's circuit. SN65LVCP408PAPT FeaturesSupplied in the 64-PowerTQFP package Adopting a supply type of Single Operating with the supply voltage of 3.3V SN65LVCP408PAPT ApplicationsThere are a lot of Texas Instruments SN65LVCP408PAPT Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74ALS137AN OverviewDigital switch is provided in the 16-DIP (0.300, 7.62mm) for the purpose of saving board space.The package is packaged in accordance with Tube.Digital switch ic adheres to a mounting method of Through Hole.Decoder/Demultiplexer is the analog IC that the multiplexers uses.By keeping the operating temperature at 0°C~70°C, turn signal switch will not be affected by external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.These multiplexers are members of the 74ALS series, which provide extensive application potential.As parts of its basic configuration, 16 terminations are desgined.There is a base part number of 74ALS137 which can also be used in order to locate the logic switch that are related to this item.The multiplexer is supplied with 5V voltage.This turn signal switch consists of 16 component pins.As a type of supply, Single is employed.This multiplexer ic has 16 pins configured.The multiplexer ic is mounted in the direction of Through Hole.The logic switch is a member of the family of ALS.In the signal multiplexer, there are 8 bits available.During mux switch's normal operation, 5V is provided with a power supply.There are 8 outputs designed for the operation of the turn signal switch.Decoder/Drivers is a category for the digital switch ics.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.It is provided with 3 inputs.In addition, it provides improved features of ADDRESS LATCHES.Configuration elements for the mux switch consist of 1. SN74ALS137AN FeaturesSupplied in the 16-DIP (0.300, 7.62mm) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V ADDRESS LATCHES SN74ALS137AN ApplicationsThere are a lot of Texas Instruments SN74ALS137AN Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | CD4066BPW OverviewProviding this information in the 14-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.Tube represents its packaging.The method digital switch ic adopts for mounting is Surface Mount.the multiplexers uses an analog IC Bilateral, FET Switches.A temperature of -55°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.Using a 3V~18V supply voltage provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 4000B series, these multiplexers have a wide range of applications.The basic configuration includes 14 terminations.There is a base part number CD4066 that can be used to locate signal switch's related components as well.The turn signal switch is supplied with a voltage of 5V volts.Currently, this turn signal switch has a total of 14 component pins.It employs GULL WING as the point at which conductors come to an end.In this case, the supply type is Dual, Single.It is configured with 14 pins.The mounting point is Surface Mount.During mux switch's normal operation, 5/15V is provided with a power supply.The part belongs to the Multiplexer or Switches category of signal switches.The resistance of the signal switching is 1.05kOhm.A total of 4 transmission channels are available in the turn signal switch's circuit. CD4066BPW FeaturesSupplied in the 14-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Dual, Single Power supplies of 5/15V CD4066BPW ApplicationsThere are a lot of Texas Instruments CD4066BPW Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | CD74AC157M OverviewIn order to conserve board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).As a result, it is packaged in the way of Tube.The mounting method digital switch ic uses is Surface Mount.Multiplexer is the analog IC that the multiplexers uses.In the case of -55°C~125°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 1.5V~5.5V supply voltage, which gives it a lot of flexibility.With the 74AC series, the multiplexers are suitable for a diverse range of applications.There are 16 terminations included in its basic configuration.To find signal switch's related components, a base part number of 74AC157 may also be used.The multiplexer's system is supplied with a voltage of 3.3V.Currently, this turn signal switch has a total of 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.This supply type employs Single.This multiplexer ic has 16 pins configured.The mounting point is Surface Mount.I would like to refer to the logic switch as a member of the AC family.There are 2 bits signal multiplexer provides.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.There is a power supply provided for the mux switch's normal operation of 3.3/5V.As part of the operation of this turn signal switch, there are 1 outputs.In this multiplexer, there is a total of 8 inputs. CD74AC157M FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 3.3/5V CD74AC157M ApplicationsThere are a lot of Texas Instruments CD74AC157M Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CBTD16210DL OverviewProviding this information in the 48-BSSOP (0.295, 7.50mm Width) enables digital switch board space to be saved.It is packaged according to the Tube method.As far as mounting is concerned, digital switch ic uses Surface Mount.In the multiplexers, the analog IC Bus Switch is used.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.With the 74CBTD series, the multiplexers are suitable for a diverse range of applications.The basic configuration includes 48 terminations.As its base part number is 74CBTD16210, logic switch can also be used to find its related parts.The turn signal switch is supplied with a voltage of 5V volts.Signal switch has 48 component pins.As a result, conductors end at GULL WING.As a type of supply, Single is employed.A configuration of 48 pins is used.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.There are 10 bits in signal multiplexer.There is a power supply provided for the mux switch's normal operation of 5V.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.In the absence of external influences, it consumes 1.5mA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.This multiplexer is equipped with 20 inputs and 20 outputs.As far as the resistance is concerned, it operates with 2.A resistance of 7Ohm is used to operate it.In order to provide greater switches' flexibility, 64mA is provided as the output current. SN74CBTD16210DL FeaturesSupplied in the 48-BSSOP (0.295, 7.50mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBTD16210DL ApplicationsThere are a lot of Texas Instruments SN74CBTD16210DL Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
APS | SY58609UMG OverviewDue to the lack of space on the board, digital switch is provided in the 16-VFQFN Exposed Pad, 16-MLF?.As a result, it is packaged in a way that is referred to as Tube.Surface Mount is the mounting method digital switch ic uses.For the analog part of the multiplexers, an IC Multiplexer is used.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.A supply voltage of 2.375V~2.625V 3V~3.6V provides digital controlled switch's superior flexibility for designers.Since they are members of the Precision Edge? series, they can be used in a wide variety of applications.This configuration includes 16 terminations as part of its basic functionality.The base part number is 58609, which can also be used to find its logic switch related parts.For multiplexer's system, 2.5V voltage is supplied.Single is employed as its supply type.The board has 16 pins configured.The mounting point is Surface Mount.There are 1 outputs designed for the operation of the turn signal switch.With a supply voltage of 3.3V, reliable performance of the multiplexers can be achieved.Voltage levels are accepted through 2 input lines of multiplexers. SY58609UMG FeaturesSupplied in the 16-VFQFN Exposed Pad, 16-MLF? package Adopting a supply type of Single Operating with the supply voltage of 3.3V 2 input lines SY58609UMG ApplicationsThere are a lot of Microchip Technology SY58609UMG Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | CD74HCT158E OverviewProviding this information in the 16-DIP (0.300, 7.62mm) enables digital switch board space to be saved.It is packaged in the way of Tube.The mounting method digital switch ic uses is Through Hole.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.A temperature of -55°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.These multiplexers are members of the 74HCT series, which provide extensive application potential.In addition, it also has a base part number of 74HCT158, which can be used to find related parts.In this case, Single is employed as the supply type.This multiplexer ic has 16 pins configured.It is mounted in the way of Through Hole.In the signal multiplexer, there are 2 bits available.The turn signal switch operates with 4 outputs.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.The multiplexer provides 8 inputs.To accept voltage levels, the multiplexers have2 input lines.A signal source is provided by 1 output lines.A total of 4 transmission channels are available in the turn signal switch's circuit.The maximum temperature for this signal switch is 125°C.It is recommended that the minimal operating temperature of the multiplexer be maintained at -55°C.In compliance with the applicable device specification, the signal switches has a maximum supply voltage of 5.5V.A minimum supply voltage of 4.5V is required to operate the digital swith.Normally, the digitalswitch consists of 4 circuits. CD74HCT158E FeaturesSupplied in the 16-DIP (0.300, 7.62mm) package Adopting a supply type of Single Operating with the supply voltage of 5V 2 input lines 1 output lines CD74HCT158E ApplicationsThere are a lot of Texas Instruments CD74HCT158E Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CBT34X245DBBR OverviewDue to the lack of space on the board, digital switch is provided in the 80-TFSOP (0.240, 6.10mm Width).The package is packaged in accordance with Cut Tape (CT).Digital switch ic adheres to a mounting method of Surface Mount.In the multiplexers, the analog IC is indicated by Bus Switch.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Since they are members of the 74CBT series, they can be used in a wide variety of applications.This configuration includes 80 terminations as part of its basic functionality.There is a base part number 74CBT34X245 that can be used to locate signal switch's related components as well.For multiplexer's system, 5V voltage is supplied.A component pin count of 80 is found on this turn signal switch.A conductor terminates at GULL WING.As a type of supply, Single is employed.This multiplexer ic is configured with 80 pins.It is mounted in the way of Surface Mount.The logic switch object belongs to the family of CBT/FST/QS/5C/B.The multiplexer ic provides 32 bits.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.The power supply of 5V is provided for mux switch's normal operation.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.Despite not interacting with external factors, it consumes 6μA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.A TR packaging method is used in the switches.The resistance of the signal switching is 2.A resistance of 7Ohm is used to operate it.There is an output current of 64mA that allows for greater switches' flexibility. SN74CBT34X245DBBR FeaturesSupplied in the 80-TFSOP (0.240, 6.10mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBT34X245DBBR ApplicationsThere are a lot of Texas Instruments SN74CBT34X245DBBR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CBTD16210DGGR OverviewDue to the lack of space on the board, digital switch is provided in the 48-TFSOP (0.240, 6.10mm Width).In this case, it is packaged as Cut Tape (CT).Surface Mount is the mounting method digital switch ic uses.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.With the 74CBTD series, the multiplexers are suitable for a diverse range of applications.This configuration includes 48 terminations as part of its basic functionality.There is a base part number of 74CBTD16210 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system is powered by 5V voltage.This turn signal switch contains 48 component pins.As a result, conductors end at GULL WING.Single is used as its supply type.Currently, it is configured with 48 pins.It is mounted in the way of Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.Signal multiplexer consists of 20 bits.It is provided that 5V has a power supply in order to function normally.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.No external influence consumes 1.5mA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.A TR packaging method is used in the switches.A resistance of 2 governs its operation.In terms of resistance, it has a value of 7Ohm.64mA provides a high degree of switches' flexibility. SN74CBTD16210DGGR FeaturesSupplied in the 48-TFSOP (0.240, 6.10mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBTD16210DGGR ApplicationsThere are a lot of Texas Instruments SN74CBTD16210DGGR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CBT162292DGGR OverviewIn order to save board space, digital switch is located in the 56-TFSOP (0.240, 6.10mm Width).The package is in the form of Cut Tape (CT).As far as mounting is concerned, digital switch ic uses Surface Mount.In the multiplexers, the analog IC Multiplexer/Demultiplexer is used.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.Multiplexers from the 74CBT series can be used in a wide range of applications.As part of its basic configuration, 56 terminations are designed as a part of it.There is a base part number of 74CBT162292 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system is powered by 5V voltage.This turn signal switch contains 56 component pins.GULL WING represents the end of conductors.There is a supply type of Single employed as part of this supply.A configuration of 56 pins is used.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.There are 12 bits signal multiplexer provides.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).In order for 5V to operate normally, a power supply is provided.The turn signal switch operates with 2 outputs.The part belongs to the Other Logic ICs category of signal switches.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The switches is packaged according to the way of TR.It operates with a resistance of 39Ohm. SN74CBT162292DGGR FeaturesSupplied in the 56-TFSOP (0.240, 6.10mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBT162292DGGR ApplicationsThere are a lot of Texas Instruments SN74CBT162292DGGR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74ALS158NSR OverviewIn order to conserve board space, digital switch is included in the 16-SOIC (0.209, 5.30mm Width).The package is packaged in the manner of Cut Tape (CT).Digital switch ic adheres to a mounting method of Surface Mount.Multiplexer is the analog IC that the multiplexers uses.In the case of 0°C~70°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.Multiplexers in the 74ALS series are suitable for a wide range of applications.There is a design for terminating 16 as part of its basic configuration.The base part number is 74ALS158, which is also useful when looking up signal switch's related components.The multiplexer's system is supplied with a voltage of 5V.In this turn signal switch, there are 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Its supply type is Single, which is used as the source of power.The board is configured with 16 pins.The mounting is in the way of Surface Mount.I would like to refer to the logic switch as a member of the ALS family.As a result, signal multiplexer provides 2 bits.In order for 5V to operate normally, a power supply is provided.The turn signal switch operates with 1 outputs.No external influence consumes 5mA current of multiplexer ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.A multiplexer such as this has 8 inputs available.The switches package is packaged in accordance with TR.A total of 4 transmission channels are available in the turn signal switch's circuit. SN74ALS158NSR FeaturesSupplied in the 16-SOIC (0.209, 5.30mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74ALS158NSR ApplicationsThere are a lot of Texas Instruments SN74ALS158NSR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CBT16861DLR OverviewProviding this information in the 48-BSSOP (0.295, 7.50mm Width) enables digital switch board space to be saved.It is packaged according to the Tape & Reel (TR) method.In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.In addition to being a member of the 74CBT series, these multiplexers have a wide range of applications.As part of its basic configuration, 48 terminations are designed as a part of it.There is a base part number of 74CBT16861 which can also be used in order to locate the logic switch that are related to this item.The multiplexer is supplied with 5V voltage.In this turn signal switch, there are 48 components that can be connected to each pin.As a result, conductors end at GULL WING.There is a type of supply of Single.The board is configured with 48 pins.The multiplexer ic is mounted in the direction of Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.Signal multiplexer consists of 20 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 4V.For mux switch's normal operation, there is a power supply provided at 5V.This is an the digital switch ic that is classified as Bus Driver/Transceivers.It consumes 3μA current of multiplexer ic without external influences.Using a supply voltage of 5V can result in reliable performance of the multiplexers.The signal switching is packaged by TR. The signal switching operates with a resistance of 2.22Ohm is the resistance at which it operates.For greater switches' flexibility, 64mA provides the output current. SN74CBT16861DLR FeaturesSupplied in the 48-BSSOP (0.295, 7.50mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBT16861DLR ApplicationsThere are a lot of Texas Instruments SN74CBT16861DLR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CBTD16210DLR OverviewProviding this information in the 48-BSSOP (0.295, 7.50mm Width) enables digital switch board space to be saved.The package is packaged in the manner of Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.the multiplexers uses IC Bus Switch as the analog IC.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.Since they are members of the 74CBTD series, they can be used in a wide variety of applications.As parts of its basic configuration, 48 terminations are desgined.Its logic switch base part number is 74CBTD16210 which can also be used to find its logic switch related parts.The multiplexer's system is supplied with a voltage of 5V.A component pin count of 48 is found on this turn signal switch.It employs GULL WING as the point at which conductors come to an end.The supply type of this multiplexer ic is Single.It is configured with 48 pins.It is positioned in the direction of Surface Mount.The logic switch is included into the family of CBT/FST/QS/5C/B.Signal multiplexer consists of 20 bits.mux switch's normal operation requires the power supply of 5V.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.In the absence of external influences, it consumes 1.5mA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.TR is used to package the switches.The resistance of the signal switching is 2.This signal switching operates at a resistance of 7Ohm.In order to provide greater switches' flexibility, 64mA is provided as the output current. SN74CBTD16210DLR FeaturesSupplied in the 48-BSSOP (0.295, 7.50mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBTD16210DLR ApplicationsThere are a lot of Texas Instruments SN74CBTD16210DLR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CBT162292DL OverviewFor the purpose of saving board space, digital switch is included in the 56-BSSOP (0.295, 7.50mm Width).Tube is the packaging method.Surface Mount is the mounting method digital switch ic uses.As the analog part, the circuit uses an analog IC Multiplexer/Demultiplexer.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.These multiplexers are members of the 74CBT series, which provide extensive application potential.Its basic configuration includes terminations in the 56 range.As its base part number is 74CBT162292, logic switch can also be used to find its related parts.The multiplexer is supplied with 5V voltage.This turn signal switch consists of 56 component pins.As a result, conductors end at GULL WING.Single is employed as its supply type.The board is configured with 56 pins.It is positioned in the direction of Surface Mount.There is a family of CBT/FST/QS/5C/B members.Signal multiplexer provides 12 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 4V.There is a power supply provided for the mux switch's normal operation of 5V.For the turn signal switch's operation, there are 2 outputs.Other Logic ICs is a category for the digital switch ics.Without the influence of external factors, it consumes 3μA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.The system operates with a resistance of 63Ohm.When the load is supplied with a voltage of 3μA, stability of the multiplexers can be maintained. SN74CBT162292DL FeaturesSupplied in the 56-BSSOP (0.295, 7.50mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V Operating with the supply current of 3μA SN74CBT162292DL ApplicationsThere are a lot of Texas Instruments SN74CBT162292DL Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74ALS156DR OverviewFor the purpose of saving board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).Tape & Reel (TR) is the packaging method.Surface Mount is the mounting method digital switch ic uses.Decoder/Demultiplexer is the analog IC that the multiplexers uses.When the operating temperature is kept at 0°C~70°C, turn signal switch will not be susceptible to external factors.Design engineers have more flexibility when digital controlled switch operates at 4.5V~5.5V voltage.The multiplexers from 74ALS series can be used for a wide range of applications.Its basic configuration includes terminations in the 16 range.To find signal switch's related components, a base part number of 74ALS156 may also be used.The multiplexer's system is powered by 5V volts.In this turn signal switch, there are 16 components that can be connected to each pin.It is the end of conductors that is represented by GULL WING.This supply type employs Single.A total of 16 pins are configured on this board.This unit is mounted in the way of Surface Mount.In the ALS family, the logic switch is included.Signal multiplexer contains 8 bits.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.A TR packaging method is used in the switches.In order to accept voltage levels, the multiplexers have input lines 2 on the board.Signal source consists of 4 output lines.A total of 12 transmission channels are available in the turn signal switch's circuit. SN74ALS156DR FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Operating with the supply voltage of 5V 2 input lines 4 output lines SN74ALS156DR ApplicationsThere are a lot of Texas Instruments SN74ALS156DR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
APS | SY58611UMG-TR OverviewIn order to conserve board space, digital switch is included in the 16-VFQFN Exposed Pad, 16-MLF?.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.A digital IC Multiplexer is used as the analog component of the multiplexers.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 2.375V~2.625V voltage.The multiplexers can be used for a wide range of applications since they are members of Precision Edge? series.As part of its basic configuration, 16 terminations are designed as a part of it.There is a base part number of 58611 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system is powered by 2.5V volts.There is a type of supply Single that is employed in this case.A total of 16 pins are configured on this board.The mounting is in the way of Surface Mount.As a result, the turn signal switch consists of 1 outputs.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 2.5V.The switches package is packaged in a way which is consistent with TR.The configuration of the mux switch contains 1 elements. SY58611UMG-TR FeaturesSupplied in the 16-VFQFN Exposed Pad, 16-MLF? package Adopting a supply type of Single Operating with the supply voltage of 2.5V SY58611UMG-TR ApplicationsThere are a lot of Microchip Technology SY58611UMG-TR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CBTH16211DGGR OverviewIn order to conserve board space, digital switch is included in the 56-TFSOP (0.240, 6.10mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.The multiplexers can be used for a wide range of applications since they are members of 74CBTH series.There are 56 terminations included in its basic configuration.The base part number is 74CBTH16211, which can also be used to find its logic switch related parts.For multiplexer's system, a voltage of 5V is supplied.In this turn signal switch, there are 56 component pins.It is the end of conductors that is represented by GULL WING.This supply type employs Single.There are 56 pins on it.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.Signal multiplexer consists of 24 bits.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).In order for 5V to operate normally, a power supply is provided.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.No external influence consumes 3μA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.The signal switching is packaged by TR. The resistance of the signal switching is 2.In terms of resistance, it has a value of 7Ohm.For higher switches' flexibility, 64mA is provided as an output current. SN74CBTH16211DGGR FeaturesSupplied in the 56-TFSOP (0.240, 6.10mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBTH16211DGGR ApplicationsThere are a lot of Texas Instruments SN74CBTH16211DGGR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74AS253AD OverviewDigital switch is provided in the 16-SOIC (0.154, 3.90mm Width) for the purpose of saving board space.As a result, it is packaged in the way of Tube.In terms of mounting, digital switch ic uses the method of Surface Mount.The analog IC used in the multiplexers can be referred to as Multiplexer.A temperature of 0°C~70°C will not leave the turn signal swturn signal switchch susceptible to external influences.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.With the 74AS series, the multiplexers are suitable for a diverse range of applications.This configuration includes 16 terminations as part of its basic functionality.The base part number is 74AS253, so you can find its logic switch related parts using that number.The multiplexer's system is powered by 5V volts.Currently, this turn signal switch has a total of 16 component pins.As the end of conductors, it uses GULL WING.Single is employed as its supply type.This multiplexer ic has 16 pins configured.The mounting is in the way of Surface Mount.Among the family of AS the logic switch is a member.As a result, signal multiplexer provides 4 bits.This turn signal switch has 1 outputs designed for its operation.Not being affected by the external factors, consumes 21mA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.The multiplexer is equipped with 8 inputs.The turn signal switch's circuit has 2 transmission channels. SN74AS253AD FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Operating with the supply voltage of 5V SN74AS253AD ApplicationsThere are a lot of Texas Instruments SN74AS253AD Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.