Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Ultralife | THS5661AIPWR OverviewA 28-TSSOP (0.173, 4.40mm Width) package is provided with this component. An electrical supply voltage of 5V powers it. Other Converters family FPGA part. An FPGA module can be attached to a development board with a Surface Mount-pin. The FPGA belongs to the CommsDAC? series of FPGAs, and it is one type of FPGA. In order to ensure a safe and efficient operation, it is important to maintain a temperature within -40°C~85°C at all times. In order to save space, this FPGA model has been contained in Tape & Reel (TR). In total, the terminations of this piece are 28. You can find related parts by using the part number THS5661, which is its base part number. There are 28 pins on this device. Design engineers can fully take advantage of its flexibility when operating at 5V supply voltage. There are a total of 28 pins on this device. There is a maximum supply voltage of 5.5V that is supported by this product. With a minimum supply voltage of 3V, it can operate. THS5661AIPWR Features28-TSSOP (0.173, 4.40mm Width) package 28 pin count 28 pins CommsDAC? series THS5661AIPWR ApplicationsThere are a lot of Texas Instruments THS5661AIPWR Digital to Analog Converters (DAC)?applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | DAC8822QBDBTR OverviewThe package that contains this software is called 38-TFSOP (0.173, 4.40mm Width). It is powered from a supply voltage of 5V. Other Converters family FPGA part. By attaching the Surface Mount connector, you can use this FPGA module with your development board. Operating temperatures should be maintained within the -40°C~125°C range at all times when the unit is in use. As a space-saving measure, this FPGA model is contained within Tape & Reel (TR). As a whole, it has 38 terminations. In order to find related parts, you can use its base part number DAC8822. In this case, there are 38 pins on the board. Power is provided by a 3/5V battery that is included with the device. In addition to this, it has 38 pins. It supports the maximal supply voltage of 5.5V. With a minimum supply voltage of 2.7V, it can operate. DAC8822QBDBTR Features38-TFSOP (0.173, 4.40mm Width) package 38 pin count 38 pins DAC8822QBDBTR ApplicationsThere are a lot of Texas Instruments DAC8822QBDBTR Digital to Analog Converters (DAC)?applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | DAC70508MRTER OverviewIt is supplied in the 16-WFQFN Exposed Pad package. An FPGA module can be attached to a development board with a Surface Mount-pin. It is recommended that the operating temperature be kept within the range -40°C~125°C TA while the machine is operating. Using the Tape & Reel (TR) layout, this FPGA model can be contained in a very small amount of space. In total, it has 16 terminations on each end. Its base part number DAC70508 can be used to find parts that are related to it. It has a total of 16 pins that are designed for it. DAC70508MRTER Features16-WFQFN Exposed Pad package 16 pins DAC70508MRTER ApplicationsThere are a lot of Texas Instruments DAC70508MRTER Digital to Analog Converters (DAC)?applications.
|
999
In-stock
|
Get Quote | |||
Ultralife |
999
In-stock
|
Get Quote | ||||
Ultralife | See Relate Datesheet |
999
In-stock
|
Get Quote | |||
APS |
999
In-stock
|
Get Quote | ||||
APS |
999
In-stock
|
Get Quote | ||||
APS |
101
In-stock
|
Get Quote | ||||
Ultralife |
967
In-stock
|
Get Quote | ||||
Ultralife |
10409
In-stock
|
Get Quote | ||||
Ultralife | DAC8501E/2K5 OverviewIn the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), this product is provided. In order to operate it, a voltage supply of 3V volts is required. A Other Converters-series FPGA part. An attachment Surface Mount allows the FPGA module to be attached to the development board. It is recommended that the operating temperature be kept within the range -40°C~105°C while the machine is operating. Using the Tape & Reel (TR) layout, this FPGA model can be contained in a very small amount of space. In total, it has a total of 8 terminations. Its base part number DAC8501 can be used to find related parts. In this case, 8 pins are used in the design. Power is provided by a 3/5V battery that is included with the device. As far as the pin count is concerned, it has 8 pins. In addition, it is able to support a maximum supply voltage of 5.5V. The unit is capable of working with a minimum supply voltage of 2.7V. DAC8501E/2K5 Features8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package 8 pin count 8 pins DAC8501E/2K5 ApplicationsThere are a lot of Texas Instruments DAC8501E/2K5 Digital to Analog Converters (DAC)?applications.
|
999
In-stock
|
Get Quote | |||
Ultralife |
318
In-stock
|
Get Quote | ||||
Ultralife |
3215
In-stock
|
Get Quote | ||||
Ultralife | DAC8750IRHAT OverviewIn the 40-VFQFN Exposed Pad package, you will find it. In order to operate it, a voltage supply of 24V volts is required. An FPGA module can be attached to a development board with a Surface Mount-pin. It is recommended that the operating temperature be kept within the range -40°C~125°C while the machine is operating. It is designed to maximiTape & Reel (TR)e space efficiency by containing the FPGA model in Tape & Reel (TR). In total, the terminations of this piece are 40. In order to find related parts, you can use its base part number DAC8750. In this case, there are 40 pins on the board. In order for this FPGA to work properly in accordance with its specifications, it is necessary that it is mounted in Surface Mount. Design engineers can fully take advantage of its flexibility when operating at 24V supply voltage. The device has a total of 40 pins on it. It can take a maximum of 36V as the supply voltage. Using 10V as the minimum supply voltage, it can operate. DAC8750IRHAT Features40-VFQFN Exposed Pad package 40 pin count 40 pins DAC8750IRHAT ApplicationsThere are a lot of Texas Instruments DAC8750IRHAT Digital to Analog Converters (DAC)?applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | DAC7801LU OverviewThis package is included in the 24-SOIC (0.295, 7.50mm Width) package and is available for purchase. An electrical supply voltage of 5V powers it. Other Converters family FPGA part. Surface Mount-connectors can be used to attach this FPGA module to the development board. As far as the operating temperature is concerned, it should be kept within -40°C~85°C when operating. It is for space saving reasons that this FPGA model is contained in Tube. In total, there are a total of 24 terminations on it. If you are looking for related parts, you can use the base part number DAC7801 as a starting point. In this case, there are 24 pins on the board. As long as this FPGA is mounted in Surface Mount, it should be able to function as it should in terms of its specifications, as well as its capabilities. Designers can fully utili5Ve its flexibility with 5V supply voltage. It is powered by a 5V battery, which can be purchased separately. This device has a pin count of 24 in it. There is a maximum supply voltage of 5.5V that is supported by this product. As long as the supply voltage is at least 4.5V, it is able to work properly. DAC7801LU Features24-SOIC (0.295, 7.50mm Width) package 24 pin count 24 pins DAC7801LU ApplicationsThere are a lot of Texas Instruments DAC7801LU Digital to Analog Converters (DAC)?applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | DAC7760IPWP OverviewThe package that contains this software is called 24-TSSOP (0.173, 4.40mm Width) Exposed Pad. Supply voltage is 10.5V volts. This FPGA part belongs to the family of Other Converters. FPGA modules can be attached to development boards using a Surface Mount-connector. While operating, the operating temperature should be kept within a range of -40°C~125°C. It is for space saving reasons that this FPGA model is contained in Tube. As a whole, it has 24 terminations. DAC7760 is the base part number that can be used to identify related parts. There are 24 pins on this device. As long as this FPGA is mounted in Surface Mount, it could work fantastically according to its specifications. It is equipped with 24 pin count. The maximum supply voltage it supports is 36V. With a minimum supply voltage of 10V, it can operate. DAC7760IPWP Features24-TSSOP (0.173, 4.40mm Width) Exposed Pad package 24 pin count 24 pins DAC7760IPWP ApplicationsThere are a lot of Texas Instruments DAC7760IPWP Digital to Analog Converters (DAC)?applications.
|
999
In-stock
|
Get Quote | |||
Ultralife |
4054
In-stock
|
Get Quote | ||||
Ultralife | DAC8728SRTQT OverviewA 56-VFQFN Exposed Pad package is provided with this component. An electrical supply voltage of 16.5V powers it. The Other Converters family of FPGA parts includes this part. The Surface Mount-slot on the development board allows you to attach the FPGA module. Operating temperatures should be maintained within the -40°C~105°C range at all times when the unit is in use. As a result of space limitations, this FPGA model has been included in Tape & Reel (TR). As a whole, it has 56 terminations. If you are looking for related parts, you can use the base part number DAC8728 as a starting point. It is designed with 56 pins. It is possible for this FPGA to perform as per its specifications as long as it is mounted in Surface Mount direction. The device has a total of 56 pins on it. It supports the maximal supply voltage of 36V. With a minimum supply voltage of 9V, it can operate. DAC8728SRTQT Features56-VFQFN Exposed Pad package 56 pin count 56 pins DAC8728SRTQT ApplicationsThere are a lot of Texas Instruments DAC8728SRTQT Digital to Analog Converters (DAC)?applications.
|
999
In-stock
|
Get Quote | |||
APS | MCP47A1T-A1E/LT OverviewAs part of the 5-TSSOP, SC-70-5, SOT-353 package, it is included. Power is provided by a 5V-volt supply. The Other Converters family of FPGA parts includes this part. An attachment Surface Mount allows the FPGA module to be attached to the development board. It is important to maintain the operating temperature within the range of -40°C~125°C when operating the machine. A model of this FPGA is contained in Tape & Reel (TR) for the purpose of saving space. Total terminations are 6. In order to find related parts, you can use its base part number MCP47A1. Powered by a 3/5V power supply, it can be operated by almost anyone. The maximum supply voltage it can take is 5.5V. The minimal supply voltage required for it is 1.8V. MCP47A1T-A1E/LT Features5-TSSOP, SC-70-5, SOT-353 package MCP47A1T-A1E/LT ApplicationsThere are a lot of Microchip Technology MCP47A1T-A1E/LT Digital to Analog Converters (DAC)?applications.
|
999
In-stock
|
Get Quote | |||
APS | MCP4901T-E/MS OverviewA 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package contains it, and it is available for download. It is powered from a supply voltage of 5V. Other Converters family FPGA part. The Surface Mount-slot on the development board allows you to attach the FPGA module. In order to ensure a safe and efficient operation, it is important to maintain a temperature within -40°C~125°C at all times. It is designed to maximiTape & Reel (TR)e space efficiency by containing the FPGA model in Tape & Reel (TR). In total, there are a total of 8 terminations on it. In order to find related parts, you can use its base part number MCP4901. Having stated that, if this FPGA is mounted in Surface Mount, then it may be able to perform fantastically according to its specifications. With a 5V supply voltage, designers can fully utili5Ve the flexibility of the device. There are a total of 8 pins on this device. The maximum supply voltage it can take is 5.5V. Using a supply voltage as low as 2.7V, it will work. MCP4901T-E/MS Features8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package 8 pin count MCP4901T-E/MS ApplicationsThere are a lot of Microchip Technology MCP4901T-E/MS Digital to Analog Converters (DAC)?applications.
|
999
In-stock
|
Get Quote | |||
APS | MCP4716A1T-E/CH OverviewIn the SOT-23-6 package, you will find it. It is powered from a supply voltage of 5.5V. Other Converters family FPGA part. The Surface Mount-slot connector on the FPGA module can be connected to the development board. During the operation of the system, the operating temperature should remain within the range of -40°C~125°C. Unlike other FPGA models, this one is contained in Tape & Reel (TR) for the sake of space saving. Total terminations are 6. In order to find related parts, you can use its base part number MCP4716. In this case, 6 pins are used in the design. As long as this FPGA is mounted in Surface Mount, it could work fantastically according to its specifications. It operates from a 3/5V power supply. With a total of 6 pins, it is equipped with a high level of security. It can accept a maximum voltage of 5.5V volts as a supply voltage. With a minimum supply voltage of 2.7V, it can operate. MCP4716A1T-E/CH FeaturesSOT-23-6 package 6 pin count 6 pins MCP4716A1T-E/CH ApplicationsThere are a lot of Microchip Technology MCP4716A1T-E/CH Digital to Analog Converters (DAC)?applications.
|
999
In-stock
|
Get Quote | |||
APS | MCP4716A3T-E/CH OverviewAs part of the SOT-23-6 package, it is included. The supply voltage is 5.5V volts. An FPGA part from the Other Converters family. An FPGA module can be attached to a development board with a Surface Mount-pin. As far as the operating temperature is concerned, it should be kept within -40°C~125°C when operating. It is for space saving reasons that this FPGA model is contained in Tape & Reel (TR). There are a total of 6 terminations. In order to find related parts, use the part number MCP4716 as a base. 6 pins are designed into the device. Providing the FPGA is mounted in Surface Mount as per the specifications of the IC, then it should work perfectly according to its specifications. Power is supplied to the device by a 3/5V battery. As far as the pin count is concerned, it has 6 pins. A maximum supply voltage of 5.5V can be applied to this product. The unit is capable of working with a minimum supply voltage of 2.7V. MCP4716A3T-E/CH FeaturesSOT-23-6 package 6 pin count 6 pins MCP4716A3T-E/CH ApplicationsThere are a lot of Microchip Technology MCP4716A3T-E/CH Digital to Analog Converters (DAC)?applications.
|
999
In-stock
|
Get Quote | |||
APS | See Relate Datesheet |
999
In-stock
|
Get Quote | |||
APS | MCP4725A3T-E/CH OverviewThis package is included in the SOT-23-6 package and is available for purchase. Power is provided by a 5V-volt supply. Part of the Other Converters family, this FPGA part is a programmable gate array. The Surface Mount-slot connector on the FPGA module can be connected to the development board. It is recommended that the operating temperature be kept within the range -40°C~125°C while the machine is operating. Unlike other FPGA models, this one is contained in Tape & Reel (TR) for the sake of space saving. Total terminations are 6. Its base part number MCP4725 can be used to find parts that are related to it. This cable has 6 pins and is designed to connect to a computer. In order for this FPGA to work properly in accordance with its specifications, it is necessary that it is mounted in Surface Mount. Power is supplied to the device by a 3/5V battery. As far as the pin count is concerned, it has 6 pins. There is a maximum supply voltage of 5.5V that is supported by this product. Using a supply voltage as low as 2.7V, it will work. MCP4725A3T-E/CH FeaturesSOT-23-6 package 6 pin count 6 pins MCP4725A3T-E/CH ApplicationsThere are a lot of Microchip Technology MCP4725A3T-E/CH Digital to Analog Converters (DAC)?applications.
|
999
In-stock
|
Get Quote | |||
APS | MCP4902T-E/ST OverviewThis package is included in the 14-TSSOP (0.173, 4.40mm Width) package and is available for purchase. In order for the device to operate, a supply voltage of 5V volts needs to be provided. The Other Converters family of FPGA parts includes this part. The Surface Mount-slot on the development board allows you to attach the FPGA module. Operating temperatures should be maintained within the -40°C~125°C range at all times when the unit is in use. As a space-saving measure, this FPGA model is contained within Tape & Reel (TR). There are a total of 14 terminations. MCP4902 is the base part number that can be used to identify related parts. The device has 14 pins which are included in the design. It is possible for this FPGA to perform as per its specifications as long as it is mounted in Surface Mount direction. In the case of 5V supply voltage, designers can take full advantage of its flexibility. Powered by a 5V power supply, it can be operated by almost anyone. The device has a total of 14 pins on it. There is a maximum supply voltage of 5.5V that is supported by this product. A minimal supply voltage of 2.7V is required for it to operate. MCP4902T-E/ST Features14-TSSOP (0.173, 4.40mm Width) package 14 pin count 14 pins MCP4902T-E/ST ApplicationsThere are a lot of Microchip Technology MCP4902T-E/ST Digital to Analog Converters (DAC)?applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | DAC081S101CIMM/NOPB OverviewThe package that contains this software is called 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). Supply voltage is 3V volts. FPGA parts like this belong to the Other Converters family. By attaching the Surface Mount connector, you can use this FPGA module with your development board. It is recommended that the operating temperature be kept within the range -40°C~105°C while the machine is operating. As a result of space limitations, this FPGA model has been included in Tape & Reel (TR). Total terminations are 8. Related parts can be found by using its base part number DAC081S101. In order for this FPGA to work properly in accordance with its specifications, it is necessary that it is mounted in Surface Mount. The 5V supply voltage provides designers with full flexibility in their designs. The device has a total of 8 pins on it. It supports the maximal supply voltage of 5.5V. The minimal supply voltage required for it is 2.7V. DAC081S101CIMM/NOPB Features8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package 8 pin count DAC081S101CIMM/NOPB ApplicationsThere are a lot of Texas Instruments DAC081S101CIMM/NOPB Digital to Analog Converters (DAC)?applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | See Relate Datesheet |
999
In-stock
|
Get Quote | |||
Ultralife | DAC081S101CIMMX/NOPB OverviewAs part of the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, it is included. 3V volts power it. An FPGA part from the Other Converters family. An FPGA module can be attached to a development board with a Surface Mount-pin. The operating temperature should be kept at -40°C~105°C when operating. A model of this FPGA is contained in Tape & Reel (TR) for the purpose of saving space. 8 terminations are present in total. Related parts can be found by using its base part number DAC081S101. Providing that this FPGA is mounted in Surface Mount, it will be able to perform according to its specifications in a flawless manner. It is powered by a 3/5V battery, which can be purchased separately. In addition to this, it has 8 pins. It can accept a maximum voltage of 5.5V volts as a supply voltage. The unit is capable of working with a minimum supply voltage of 2.7V. DAC081S101CIMMX/NOPB Features8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package 8 pin count DAC081S101CIMMX/NOPB ApplicationsThere are a lot of Texas Instruments DAC081S101CIMMX/NOPB Digital to Analog Converters (DAC)?applications.
|
999
In-stock
|
Get Quote | |||
APS | MCP4911T-E/MC OverviewThere are two packages that contain it: 8-VFDFN Exposed Pad package and X package. Supply voltage is 5V volts. Part of the Other Converters family, this FPGA part is a programmable gate array. Using a Surface Mount connector, you can mount this FPGA module on the development board. It is necessary to keep the operating temperature within -40°C~125°C when the device is operating. As a space-saving measure, this FPGA model is contained within Tape & Reel (TR). It is designed with 8 terminations. Its base part number MCP4911 can be used to find related parts. The device is designed with 8 pins in total. Providing that this FPGA is mounted in Surface Mount, it will be able to perform according to its specifications in a flawless manner. Its flexibility is fully utili5Ved when operated with a supply voltage of 5V. This device has a pin count of 8 in it. A maximum supply voltage of 5.5V can be applied to this product. With a minimum supply voltage of 2.7V, it can operate. MCP4911T-E/MC Features8-VFDFN Exposed Pad package 8 pin count 8 pins MCP4911T-E/MC ApplicationsThere are a lot of Microchip Technology MCP4911T-E/MC Digital to Analog Converters (DAC)?applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | DAC0800LCMX/NOPB OverviewThere are two packages that contain it: 16-SOIC (0.154, 3.90mm Width) package and X package. In order for the device to operate, a supply voltage of 15V volts needs to be provided. A Other Converters-series FPGA part. Surface Mount-connectors can be used to attach this FPGA module to the development board. In order to ensure a safe and efficient operation, it is important to maintain a temperature within 0°C~70°C at all times. Unlike other FPGA models, this one is contained in Tape & Reel (TR) for the sake of space saving. Total terminations are 16. DAC0800 is the base part number that can be used to identify related parts. The device is designed with 16 pins in total. In order for this FPGA to work properly in accordance with its specifications, it is necessary that it is mounted in Surface Mount. The device has a total of 16 pins on it. DAC0800LCMX/NOPB Features16-SOIC (0.154, 3.90mm Width) package 16 pin count 16 pins DAC0800LCMX/NOPB ApplicationsThere are a lot of Texas Instruments DAC0800LCMX/NOPB Digital to Analog Converters (DAC)?applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.