Image | Part | Manufacturer | Description | Stock | Action | |
---|---|---|---|---|---|---|
Ultralife | CD74HC138M OverviewIt is included in the 16-SOIC (0.154, 3.90mm Width) in order to save board space.It is packaged in the way of Tube.In terms of mounting, digital switch ic uses the Surface Mount method .The analog IC used in the multiplexers can be referred to as Decoder/Demultiplexer.When the operating temperature is kept at -55°C~125°C, the machine will not be sensturn signal switchive to external influences.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2V~6V.provides digital controlled switch's digital controlled switch'sAs a member of 74HC series, the multiplexers can be used for a wide range of applications.Its basic configuration includes terminations in the 16 range.The base part number is 74HC138, which is also useful when looking up signal switch's related components.For multiplexer's system, a voltage of 4.5V is supplied.In this turn signal switch, there are 16 component pins.It employs GULL WING as the point at which conductors come to an end.In this case, the supply type is Single.A configuration of 16 pins is used.The mounting is in the way of Surface Mount.The HC/UH family includes the logic switch.Signal multiplexer contains 8 bits.Keeping the minimum supply voltage (Vsup) at 2V prevents some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 6V in order to prevent some unnecessary failures.In order to maintain mux switch's normal operation, power is provided to 2/6V.The turn signal switch has 8 outputs.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.In the absence of external influences, it consumes 8μA current of multiplexer ic.The multiplexer provides 3 inputs.To ensure that the digitalswitch performs properly, 1 circuits are formed. CD74HC138M FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 2/6V CD74HC138M ApplicationsThere are a lot of Texas Instruments CD74HC138M Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | CD74HCT138E OverviewFor the purpose of saving board space, digital switch is included in the 16-DIP (0.300, 7.62mm).It is packaged in the way of Tube.As far as mounting is concerned, digital switch ic uses Through Hole.the multiplexers uses an analog IC Decoder/Demultiplexer.When the operating temperature is kept at -55°C~125°C, the machine will not be sensturn signal switchive to external influences.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.With the 74HCT series, the multiplexers are suitable for a diverse range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.There is a base part number of 74HCT138 which can also be used in order to locate the logic switch that are related to this item.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThis turn signal switch has 16 component pins.As a type of supply, Single is employed.Currently, it is configured with 16 pins.The mount is in Through Hole.The logic switch is a member of the HCT family.Signal multiplexer provides 8 bits.The power supply of 5V is provided for mux switch's normal operation.There are 8 outputs designed to operate the turn signal switch.In electronic terms, the digital switch ic is classified as part number Decoder/Drivers.No external influence consumes 8μA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.This multiplexer has 3 inputs.1 circuits are formed for the normal operation of the digitalswitch. CD74HCT138E FeaturesSupplied in the 16-DIP (0.300, 7.62mm) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V CD74HCT138E ApplicationsThere are a lot of Texas Instruments CD74HCT138E Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | CD40147BE OverviewDue to the lack of space on the board, digital switch is provided in the 16-DIP (0.300, 7.62mm).Tube represents its packaging.The method digital switch ic adopts for mounting is Through Hole.the multiplexers uses an analog IC Priority Encoder.By maintaining the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.Using a 3V~18V supply voltage provides digital controlled switch's superior flexibility for designers.Since they are members of the 4000B series, they can be used in a wide variety of applications.As part of its basic configuration, 16 terminations are designed as a part of it.You can also find related parts by using its logic switch base part number of CD40147.The turn signal switch is supplied with a voltage of 5V volts.This turn signal switch consists of 16 component pins.There is a type of supply Single that is employed in this case.Currently, it is configured with a 16 pin configuration.This unit is mounted in the way of Through Hole.In this signal multiplexer, there are 10 bits that are provided.Vsup should be kept at 3V to prevent some unnecessary failures.There are 4 outputs designed to operate the turn signal switch.The digital switch ic is an electronic part classified into Arithmetic Circuits.It has 10 inputs.The turn signal switch's circuit consists of 4 channels that are being used for transmission in the circuit. CD40147BE FeaturesSupplied in the 16-DIP (0.300, 7.62mm) package Adopting a supply type of Single CD40147BE ApplicationsThere are a lot of Texas Instruments CD40147BE Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | CD74HC238E OverviewIt is included in the 16-DIP (0.300, 7.62mm) in order to save board space.As a result, it is packaged in a way that is referred to as Tube.The mounting method digital switch ic uses is Through Hole.The multiplexers uses an analog IC Decoder/Demultiplexer as the analog part of the circuit.By maintaining the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.A supply voltage of 2V~6V provides digital controlled switch's superior flexibility for designers.Multiplexers from the 74HC series can be used in a wide range of applications.This configuration includes 16 terminations as part of its basic functionality.In addition, it also has a base part number of 74HC238, which can be used to find related parts.The voltage supplied for multiplexer's system is 4.5V.multiplexer's systemA component pin count of 16 can be found on this turn signal switch.The supply type of this multiplexer ic is Single.A configuration of 16 pins is used.Multiplexer ics are mounted in the direction of Through Hole.The HC/UH family includes the logic switch.In the signal multiplexer, there are 8 bits available.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.It is advisable that the maximal supply voltage (Vsup) remains at 6V to avoid some unnecessary failures.In order for 2/6V to operate normally, a power supply is provided.As a result, the turn signal switch consists of 8 outputs.In electronic terms, the digital switch ic is classified as part number Decoder/Drivers.Not being affected by the external factors, consumes 8μA current of multiplexer ic.There are 3 inputs provided in this multiplexer.It contains 1 elements in mux switch configuration. CD74HC238E FeaturesSupplied in the 16-DIP (0.300, 7.62mm) package Adopting a supply type of Single Power supplies of 2/6V CD74HC238E ApplicationsThere are a lot of Texas Instruments CD74HC238E Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74HCT138N OverviewDue to the fact that it is provided in the 16-DIP (0.300, 7.62mm), digital switch allows the board to be compacted.It is packaged according to the Tube method.The method digital switch ic adopts for mounting is Through Hole.For the analog part of the multiplexers, an IC Decoder/Demultiplexer is used.The operating temperature of -40°C~85°C will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sAs a member of 74HCT series, the multiplexers can be used for a wide range of applications.Its basic configuration includes terminations in the 16 range.As its base part number is 74HCT138, logic switch can also be used to find its related parts.The multiplexer's system is powered by 5V voltage.There are 16 component pins in this turn signal switch.There is a type of supply Single that is employed in this case.Currently, it is configured with a 16 pin configuration.The mounting is in the way of Through Hole.The logic switch object belongs to the family of HCT.There are 8 bits in signal multiplexer.The power supply of 5V is provided for mux switch's normal operation.The turn signal switch has 8 outputs.The digital switch ic is an electronic part classified into Decoder/Drivers.In the absence of external influences, it consumes 80μA current of multiplexer ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.This multiplexer is equipped with 3 inputs and 3 outputs.For greater switches' flexibility, 25mA provides the output current.Normally, the digitalswitch consists of 1 circuits. SN74HCT138N FeaturesSupplied in the 16-DIP (0.300, 7.62mm) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74HCT138N ApplicationsThere are a lot of Texas Instruments SN74HCT138N Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | CD4556BE OverviewIt is included in the 16-DIP (0.300, 7.62mm) in order to save board space.In this case, it is packaged as Tube.Mounting is performed using Through Hole.the multiplexers uses an analog IC Decoder/Demultiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -55°C~125°C.Using a 3V~18V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers in the 4000B series are suitable for a wide range of applications.The basic configuration of this system includes 16 terminations.There is a base part number of CD4555 which can also be used in order to locate the logic switch that are related to this item.In multiplexer's system, 5V is the voltage supplied.This turn signal switch contains 16 component pins.In this case, Dual is employed as the supply type.Currently, it is configured with a 16 pin configuration.As you can see, it is mounted in the direction of Through Hole.As a result, signal multiplexer provides a total of 4 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 3V.For the turn signal switch's operation, there are 4 outputs.This is a signal switch that is categorized as Decoder/Drivers.Not being affected by the external factors, consumes 100μA current of multiplexer ic.It is possible to accept voltage levels through 1 input lines of multiplexers.The digitalswitch relies on 2 circuits to function normally. CD4556BE FeaturesSupplied in the 16-DIP (0.300, 7.62mm) package Adopting a supply type of Dual 1 input lines CD4556BE ApplicationsThere are a lot of Texas Instruments CD4556BE Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74HCT139N OverviewDigital switch is provided in the 16-DIP (0.300, 7.62mm) for the purpose of saving board space.It is packaged according to the Tube method.Mounting is performed using Through Hole.A digital IC Decoder/Demultiplexer is used as the analog component of the multiplexers.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sMultiplexers in the 74HCT series are suitable for a wide range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.There is a base part number 74HCT139 that can be used to locate signal switch's related components as well.The turn signal switch is supplied with a voltage of 5V volts.This turn signal switch contains 16 component pins.As a type of supply, Single is employed.A total of 16 pins are configured on this board.Multiplexer ics are mounted in the direction of Through Hole.In the HCT family, the logic switch is included.Signal multiplexer contains 4 bits.Normally, 5V is powered by a battery.As a result, the turn signal switch consists of 4 outputs.In electronic terms, the digital switch ic is classified as Decoder/Drivers.There are no external influences on this multiplexer ic, so it consumes 8μA current.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.To operate the digitalswitch normally, 2 circuits are formed. SN74HCT139N FeaturesSupplied in the 16-DIP (0.300, 7.62mm) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74HCT139N ApplicationsThere are a lot of Texas Instruments SN74HCT139N Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LS251N OverviewDue to the lack of space on the board, digital switch is provided in the 16-DIP (0.300, 7.62mm).Tube represents its packaging.The mounting method digital switch ic uses is Through Hole.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.As long as the operating temperature is 0°C~70°C, turn signal switch will not be influenced by external factors.Design engineers have more flexibility when digital controlled switch operates at 4.75V~5.25V voltage.Multiplexers from the 74LS series can be used in a wide range of applications.There is a design for terminating 16 as part of its basic configuration.There is a base part number of 74LS251 which can also be used in order to locate the logic switch that are related to this item.In this case, 5V is the voltage supplied to the multiplexer's system.This turn signal switch has 16 component pins.Single is used as its supply type.This multiplexer ic is configured with 16 pins.The mounting point is Through Hole.The logic switch object belongs to the family of LS.There are 8 bits signal multiplexer provides.A power supply is provided for mux switch's normal operation of 5V.The turn signal switch contains 1 outputs designed to operate.There are no external influences on this multiplexer ic, so it consumes 7.1mA current.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.This multiplexer has a total of 8 inputs.1 circuits are formed for the normal operation of the digitalswitch. SN74LS251N FeaturesSupplied in the 16-DIP (0.300, 7.62mm) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74LS251N ApplicationsThere are a lot of Texas Instruments SN74LS251N Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LVC157AD OverviewDigital switch is provided in the 16-SOIC (0.154, 3.90mm Width) for the purpose of saving board space.It is packaged according to the Tube method.digital switch ic uses the method of Surface Mount for mounting.The analog IC in the multiplexers is identified as Multiplexer.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.Designers have greater flexibility using digital controlled switch when it works with 2V~3.6V voltage.As a member of 74LVC series, the multiplexers can be used for a wide range of applications.Among its basic configurations are 16 terminations.There is a base part number 74LVC157 that can be used to locate signal switch's related components as well.The multiplexer is supplied with 1.8V voltage.This turn signal switch has 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a type of supply of Single.A configuration of 16 pins is used.This unit is mounted in the way of Surface Mount.The logic switch is a member of the LVC/LCX/Z family.There are 2 bits signal multiplexer provides.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.For mux switch's normal operation, power supply 3.3V is provided.For the turn signal switch's operation, there are 1 outputs.The multiplexer provides 8 inputs.A total of 4 transmission channels are available in the turn signal switch's circuit. SN74LVC157AD FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 3.3V SN74LVC157AD ApplicationsThere are a lot of Texas Instruments SN74LVC157AD Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LS348N OverviewDue to the lack of space on the board, digital switch is provided in the 16-DIP (0.300, 7.62mm).In this case, it is packaged as Tube.Through Hole is the mounting method digital switch ic uses.A digital IC Priority Encoder is used as the analog component of the multiplexers.A temperature of 0°C~70°C will not leave the turn signal swturn signal switchch susceptible to external influences.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.75V~5.25V.provides digital controlled switch's digital controlled switch'sMultiplexers of the 74LS series can be used in a wide range of applications.The basic configuration of this system includes 16 terminations.As its base part number is 74LS348, logic switch can also be used to find its related parts.The multiplexer's system is powered by 5V volts.This turn signal switch consists of 16 component pins.In this case, Single is employed as the supply type.This multiplexer ic has 16 pins configured.This unit is mounted in the way of Through Hole.There is a family of LS members.The multiplexer ic provides 8 bits.For mux switch's normal operation, power supply 5V is provided.The turn signal switch contains 3 outputs designed to operate.This is an the digital switch ic that is classified as Arithmetic Circuits.Using a supply voltage of 5V can result in reliable performance of the multiplexers.This multiplexer is equipped with 8 inputs and 8 outputs. SN74LS348N FeaturesSupplied in the 16-DIP (0.300, 7.62mm) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74LS348N ApplicationsThere are a lot of Texas Instruments SN74LS348N Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | <h3>SN74CB3T16210DGVR Overview</h3><div><br/>Due to the lack of space on the board, digital switch is provided in the 48-TFSOP (0.173, 4.40mm Width).It is packaged according to the Tape & Reel (TR) method.As far as mounting is concerned, digital switch ic uses Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.The multiplexers from 74CB series can be used for a wide range of applications.There are 48 terminations included in its basic configuration.As its base part number is 74CB3T16210, logic switch can also be used to find its related parts.The voltage supplied for multiplexer's system is 2.5V.multiplexer's systemCurrently, this turn signal switch has a total of 48 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a type of supply of Single.A configuration of 48 pins is used.It is positioned in the direction of Surface Mount.The logic switch is a member of the CB3T/3VT family.As a result, signal multiplexer provides 20 bits.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.Not being affected by the external factors, consumes 40μA current of multiplexer ic.A TR packaging method is used in the switches.A resistance of 2 governs its operation.With a resistance of 9.5Ohm, it operates.In addition, it provides improved features of ALSO OPERATES AT 3.3V SUPPLY.For greater switches' flexibility, the output current of 64mA is provided.<br/><br/></div><h3>SN74CB3T16210DGVR Features</h3><div><br/>Supplied in the 48-TFSOP (0.173, 4.40mm Width) package<br/>Adopting a supply type of Single<br/>ALSO OPERATES AT 3.3V SUPPLY<br/><br/></div><h3>SN74CB3T16210DGVR Applications</h3><div><br/>There are a lot of Texas Instruments SN74CB3T16210DGVR Signal Switches / Multiplexers / Decoders applications. <br/><br/></div><ul style="list - style: none; padding: 0; margin: 0; "><li>Combinational circuit<!--<li--></li><li>LVDS <!--<li--></li><li>Injectors<!--<li--></li><li>To select different task for memory in microprocessor memory systems<!--<li--></li><li>Paper plants<!--<li--></li><li>Analog, digital or video signal switching<!--<li--></li><li>Video transmission<!--<li--></li><li>Memory chips<!--<li--></li><li>Arithmetic Logic Units<!--<li--></li><li>Electronics industry<!--<li--></li></ul> |
999
In-stock
|
Get Quote | |||
Ultralife | SN74LS158N OverviewDue to the fact that it is provided in the 16-DIP (0.300, 7.62mm), digital switch allows the board to be compacted.The package is packaged in accordance with Tube.digital switch ic uses the method of Through Hole for mounting.In the multiplexers, the analog IC is indicated by Multiplexer.By maintaining the operating temperature at 0°C~70°C, turn signal switch will not be affected by external factors.With a supply voltage of 4.75V~5.25V, designers have greater flexibility of digital controlled switch.Multiplexers from the 74LS series can be used in a wide range of applications.Among its basic features are 16 terminations.The part number for 74LS158 can be used to find its logic switch related parts as well.For multiplexer's system, a voltage of 5V is supplied.This turn signal switch consists of 16 component pins.This supply type employs Single.This multiplexer ic is configured with 16 pins.The multiplexer ic is mounted in the direction of Through Hole.The logic switch object belongs to the family of LS.As a result, signal multiplexer provides a total of 2 bits.In order to maintain mux switch's normal operation, power is provided to 5V.The turn signal switch has 1 outputs designed for operation.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.This multiplexer has a total of 8 inputs.There are a total of 4 channels used for transmitting data in the turn signal switch's circuit. SN74LS158N FeaturesSupplied in the 16-DIP (0.300, 7.62mm) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74LS158N ApplicationsThere are a lot of Texas Instruments SN74LS158N Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN65LVDS250DBT OverviewThe reason it is provided is that the board space can be saved by placing digital switch in the 38-TFSOP (0.173, 4.40mm Width).In this case, it is packaged as Tube.Surface Mount is the mounting method digital switch ic uses.The multiplexers uses an analog IC Crosspoint Switch as the analog part of the circuit.The operating temperature of -40°C~85°C will not be susceptible to external factors.With a supply voltage of 3V~3.6V, designers have greater flexibility of digital controlled switch.Several applications are possible for 65LVDS series multiplexers.This configuration includes 38 terminations as part of its basic functionality.In addition, it also has a base part number of 65LVDS250, which can be used to find related parts.For multiplexer's system, 3.3V voltage is supplied.This turn signal switch consists of 38 component pins.As the end of conductors, it uses GULL WING.In this case, Single is employed as the supply type.With 38 pins, it is configured.It is recommended that the minimum supply voltage (Vsup) be kept at 3V to avoid some unnecessary failures.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.Multiplexer or Switches is a category for the digital switch ics.The performance of the multiplexers can be reliably maintained at a voltage of 3.3V.There are a total of 4 channels used for transmitting data in the turn signal switch's circuit. SN65LVDS250DBT FeaturesSupplied in the 38-TFSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Operating with the supply voltage of 3.3V SN65LVDS250DBT ApplicationsThere are a lot of Texas Instruments SN65LVDS250DBT Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | DS10CP154ATSQ/NOPB OverviewAs a means of saving space, digital switch is provided in the 40-WFQFN Exposed Pad.The package is packaged in the manner of Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.The multiplexers uses an analog IC Crosspoint Switch as the analog part of the circuit.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 3V~3.6V supply voltage, which gives it a lot of flexibility.Among its basic features are 40 terminations.There is a base part number of DS10CP154 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system is powered by 3.3V volts.This supply type employs Digital, Single.Currently, it is configured with 40 pins.This unit is mounted in the way of Surface Mount.Part number Multiplexer or Switches indicates that the digital switch ic is an electronic part.With a supply voltage of 3.3V, reliable performance of the multiplexers can be achieved.Stability of the multiplexers can be kept when the supply voltage of 220mA is delivered to the load. DS10CP154ATSQ/NOPB FeaturesSupplied in the 40-WFQFN Exposed Pad package Adopting a supply type of Digital, Single Operating with the supply voltage of 3.3V Operating with the supply current of 220mA DS10CP154ATSQ/NOPB ApplicationsThere are a lot of Texas Instruments DS10CP154ATSQ/NOPB Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74HC138DBR OverviewIn order to conserve board space, digital switch is included in the 16-SSOP (0.209, 5.30mm Width).The package is in the form of Cut Tape (CT).In terms of mounting, digital switch ic uses the Surface Mount method .A digital IC Decoder/Demultiplexer is used as the analog component of the multiplexers.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.With a supply voltage of 2V~6V, designers have greater flexibility of digital controlled switch.In addition to being a member of the 74HC series, these multiplexers have a wide range of applications.It is designed with 16 terminations as part of its basic configuration.Its logic switch base part number is 74HC138 which can also be used to find its logic switch related parts.The multiplexer's system works with 5V voltage.This turn signal switch contains 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.Its supply type is Single, which is used as the source of power.With 16 pins, it is configured.It is mounted in the way of Surface Mount.The logic switch is a member of the family of HC/UH.As a result, signal multiplexer provides a total of 8 bits.Keeping Vsup at 2V will prevent some unwanted failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.Normally, 2/6V is powered by a battery.The turn signal switch has 8 outputs.The part belongs to the Decoder/Drivers category of signal switches.It consumes 8μA current of multiplexer ic without external influences.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.It is provided with 3 inputs.The signal switching is packaged by TR. A normal operation of the digitalswitch requires 1 circuits. SN74HC138DBR FeaturesSupplied in the 16-SSOP (0.209, 5.30mm Width) package Adopting a supply type of Single Power supplies of 2/6V Operating with the supply voltage of 5V SN74HC138DBR ApplicationsThere are a lot of Texas Instruments SN74HC138DBR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CBTD1G125DCKR OverviewDue to the lack of space on the board, digital switch is provided in the 5-TSSOP, SC-70-5, SOT-353.It is packaged according to the Tape & Reel (TR) method.digital switch ic uses the method of Surface Mount for mounting.In the multiplexers, the analog IC is indicated by Bus Switch.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.The multiplexers can be used for a wide range of applications since they are members of 74CBTD series.As part of its basic configuration, 5 terminations are designed as a part of it.The base part number is 74CBTD1G125, which is also useful when looking up signal switch's related components.For multiplexer's system, a voltage of 5V is supplied.This turn signal switch contains 5 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Single is used as its supply type.Currently, it is configured with a 5 pin configuration.This unit is mounted in the way of Surface Mount.In the signal multiplexer, there are 1 bits available.The power supply of 5V is provided for mux switch's normal operation.Bus Driver/Transceivers is a category for the digital switch ics.Without the influence of external factors, it consumes 1.5mA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.The switches package is packaged in a way which is consistent with TR.2 ports are used for some other peripheral signal switchings to plug in.The resistance of the signal switching is 35Ohm.This mux switch configuration has 1 elements. SN74CBTD1G125DCKR FeaturesSupplied in the 5-TSSOP, SC-70-5, SOT-353 package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBTD1G125DCKR ApplicationsThere are a lot of Texas Instruments SN74CBTD1G125DCKR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | CD4555BM96 OverviewThe reason it is provided is that the board space can be saved by placing digital switch in the 16-SOIC (0.154, 3.90mm Width).The package is packaged in the manner of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.In the multiplexers, the analog IC is indicated by Decoder/Demultiplexer.By maintaining the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 3V~18V voltage.As a member of 4000B series, the multiplexers can be used for a wide range of applications.Among its basic configurations are 16 terminations.The part number for CD4555 can be used to find its logic switch related parts as well.The multiplexer's system works with 5V voltage.Signal switch has 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply of Dual.The board is configured with 16 pins.The mounting point is Surface Mount.Signal multiplexer consists of 4 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 3V.As a result, the turn signal switch consists of 4 outputs.Part number Decoder/Drivers indicates that the digital switch ic is an electronic part.In the absence of external influences, it consumes 100μA current of multiplexer ic.The switches package is packaged in accordance with the TR method.It is possible to accept voltage levels by using one of the 1 input lines of multiplexers.The configuration of the mux switch contains 2 elements. CD4555BM96 FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Dual 1 input lines CD4555BM96 ApplicationsThere are a lot of Texas Instruments CD4555BM96 Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife |
3034
In-stock
|
Get Quote | ||||
Ultralife | SN74CBTD3306DR OverviewFor the purpose of saving board space, digital switch is included in the 8-SOIC (0.154, 3.90mm Width).The package is in the form of Cut Tape (CT).Digital switch ic adheres to a mounting method of Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Several applications are possible for 74CBTD series multiplexers.The basic configuration of this system includes 8 terminations.The base part number is 74CBTD3306, which can also be used to find its logic switch related parts.The multiplexer's system works with 5V voltage.A component pin count of 8 is found on this turn signal switch.As a result, GULL WING represents the end of the conductors.There is a type of supply Single that is employed in this case.This multiplexer ic has 8 pins configured.The mount is in Surface Mount.In the CBT/FST/QS/5C/B family, the logic switch is included.In this signal multiplexer, there are 1 bits that are provided.It is provided that 5V has a power supply in order to function normally.The part belongs to the Bus Driver/Transceivers category of signal switches.It consumes 1.5mA current of multiplexer ic since it is not affected by external factors.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.TR is used to package the switches.The system operates with a resistance of 2.As far as the resistance is concerned, it operates with 7Ohm.There are a total of 2 channels used for transmitting data in the turn signal switch's circuit.For increased switches' flexibility, the output current of 64mA is provided. SN74CBTD3306DR FeaturesSupplied in the 8-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74CBTD3306DR ApplicationsThere are a lot of Texas Instruments SN74CBTD3306DR Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74AHC138D OverviewThe reason it is provided is that the board space can be saved by placing digital switch in the 16-SOIC (0.154, 3.90mm Width).As a result, it is packaged in a way that is referred to as Tube.For mounting, digital switch ic uses the method Surface Mount.Decoder/Demultiplexer is the analog IC that the multiplexers uses.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2V~5.5V, designers have superior flexibility.With the 74AHC series, the multiplexers are suitable for a diverse range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.There is a base part number 74AHC138 that can be used to locate signal switch's related components as well.The turn signal switch is supplied with a voltage of 3.3V volts.This turn signal switch consists of 16 component pins.As the end of conductors, it uses GULL WING.As a type of supply, Single is employed.The board has 16 pins configured.The mounting point is Surface Mount.There is a family of AHC/VHC/H/U/V members.There are 8 bits in signal multiplexer.It is recommended that the minimum supply voltage (Vsup) be kept at 2V so that unnecessary failures can be prevented.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.During mux switch's normal operation, 2/5.5V is provided with a power supply.The turn signal switch has 8 outputs designed for operation.Part number Decoder/Drivers indicates that the digital switch ic is an electronic part.Without external influences, it consumes 4μA current of multiplexer ic.This multiplexer has a total of 3 inputs.1 circuits are formed for the normal operation of the digitalswitch. SN74AHC138D FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 2/5.5V SN74AHC138D ApplicationsThere are a lot of Texas Instruments SN74AHC138D Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LVC139AD OverviewDue to the fact that it is provided in the 16-SOIC (0.154, 3.90mm Width), digital switch allows the board to be compacted.It is packaged according to the Tube method.As far as mounting is concerned, digital switch ic uses Surface Mount.A digital IC Decoder/Demultiplexer is used as the analog component of the multiplexers.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 1.65V~3.6V, designers are provided with a greater degree of flexibility.The multiplexers from 74LVC series can be used for a wide range of applications.Its basic configuration includes terminations in the 16 range.There is a base part number 74LVC139 that can be used to locate signal switch's related components as well.For multiplexer's system, 1.8V voltage is supplied.Currently, this turn signal switch has a total of 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a supply type of Single employed as part of this supply.This multiplexer ic has 16 pins configured.The mounting is in the way of Surface Mount.The LVC/LCX/Z family includes the logic switch.In the signal multiplexer, there are 4 bits available.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 1.65V.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V in order to prevent some unnecessary failures.For mux switch's normal operation, there is a power supply provided at 3.3V.This turn signal switch has 4 outputs designed for its operation.In electronic terms, the digital switch ic is classified as part number Decoder/Drivers.In the absence of external influences, it consumes 10μA current of multiplexer ic.The digitalswitch relies on 2 circuits to function normally. SN74LVC139AD FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 3.3V SN74LVC139AD ApplicationsThere are a lot of Texas Instruments SN74LVC139AD Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | CD74HC147M OverviewIt is included in the 16-SOIC (0.154, 3.90mm Width) in order to save board space.As a result, it is packaged in the way of Tube.In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses an analog IC Priority Encoder.A temperature of -55°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.The turn signal switch is designed for use with a 2V~6V supply voltage, which gives it a lot of flexibility.Several applications are possible for 74HC series multiplexers.There is a design for terminating 16 as part of its basic configuration.The part number for 74HC147 can be used to find its logic switch related parts as well.For multiplexer's system, 4.5V voltage is supplied.Signal switch has 16 component pins.A conductor terminates at GULL WING.Single is used as its supply type.Currently, it is configured with 16 pins.Surface Mount is the way it is mounted.The logic switch belongs to the family of HC/UH.Signal multiplexer provides 10 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 2V.Avoid unnecessary failures by keeping Vsup at 6V.For mux switch's normal operation, there is a power supply provided at 2/6V.In electronic terms, the digital switch ic is classified as part number Arithmetic Circuits.This multiplexer is equipped with 9 inputs and 9 outputs.A signal source has 4 output lines. CD74HC147M FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 2/6V 4 output lines CD74HC147M ApplicationsThere are a lot of Texas Instruments CD74HC147M Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74HCT138PW OverviewIt is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save board space.As a result, it is packaged in a way that is referred to as Tube.In terms of mounting, digital switch ic uses the method of Surface Mount.A digital IC Decoder/Demultiplexer is used as the analog component of the multiplexers.The operating temperature of -40°C~85°C will not be susceptible to external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 74HCT series.There is a design for terminating 16 as part of its basic configuration.The base part number is 74HCT138, which can also be used to find its logic switch related parts.The multiplexer's system is supplied with a voltage of 5V.This turn signal switch consists of 16 component pins.It is the end of conductors that is represented by GULL WING.Its supply type is Single, which is used as the source of power.Currently, it is configured with a 16 pin configuration.The multiplexer ic is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the HCT family.In this signal multiplexer, there are 8 bits provided.In order to maintain mux switch's normal operation, power is provided to 5V.This turn signal switch has 8 outputs designed for its operation.In electronic terms, the digital switch ic is classified as part number Decoder/Drivers.Without external influences, it consumes 80μA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.This multiplexer is equipped with 3 inputs and 3 outputs.The mux switch configuration consists of 1 elements. SN74HCT138PW FeaturesSupplied in the 16-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74HCT138PW ApplicationsThere are a lot of Texas Instruments SN74HCT138PW Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LVC2G157DCUT OverviewIn order to conserve board space, digital switch is included in the 8-VFSOP (0.091, 2.30mm Width).Tape & Reel (TR) is the method used for packaging.For mounting, digital switch ic uses the method Surface Mount.As the analog part, the circuit uses an analog IC Multiplexer.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.Designers have greater flexibility when digital controlled switch operates at a 1.65V~5.5V supply voltage.With the 74LVC series, the multiplexers are suitable for a diverse range of applications.The basic configuration of this system includes 8 terminations.There is a base part number of 74LVC2G157 which can also be used in order to locate the logic switch that are related to this item.The multiplexer is supplied with 1.8V voltage.Signal switch has 8 component pins.A conductor terminates at GULL WING.There is a supply type of Single employed as part of this supply.A configuration of 8 pins is used.The mounting point is Surface Mount.In the LVC/LCX/Z family, the logic switch is included.In this signal multiplexer, there are 2 bits that are provided.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.For mux switch's normal operation, there is a power supply provided at 3.3V.As a result, the turn signal switch consists of 1 outputs.The multiplexer is equipped with 2 inputs.In accordance with TR, switches can be packaged. SN74LVC2G157DCUT FeaturesSupplied in the 8-VFSOP (0.091, 2.30mm Width) package Adopting a supply type of Single Power supplies of 3.3V SN74LVC2G157DCUT ApplicationsThere are a lot of Texas Instruments SN74LVC2G157DCUT Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | CD74HCT238M OverviewIn order to save board space, digital switch is located in the 16-SOIC (0.154, 3.90mm Width).The package is packaged in the manner of Tube.As far as mounting is concerned, digital switch ic uses Surface Mount.As the analog part, the circuit uses an analog IC Decoder/Demultiplexer.If the operating temperature is maintained at -55°C~125°C, turn signal switch will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sIn addition to being a member of the 74HCT series, these multiplexers have a wide range of applications.The basic configuration of this system includes 16 terminations.There is a base part number of 74HCT238 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system works with 5V voltage.A component pin count of 16 can be found on this turn signal switch.GULL WING represents the end of conductors.In this case, the supply type is Single.This multiplexer ic has 16 pins configured.This unit is mounted in the way of Surface Mount.The logic switch object belongs to the family of HCT.Signal multiplexer provides 8 bits.For mux switch's normal operation, power supply 5V is provided.The turn signal switch has 8 outputs.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.It consumes 8μA current of multiplexer ic since it is not affected by external factors.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The multiplexer provides 3 inputs.The mux switch configuration contains 1 elements. CD74HCT238M FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V CD74HCT238M ApplicationsThere are a lot of Texas Instruments CD74HCT238M Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74LS138D OverviewDigital switch is provided in the 16-SOIC (0.154, 3.90mm Width) for the purpose of saving board space.The package is in the form of Tube.The mounting method digital switch ic uses is Surface Mount.the multiplexers uses an analog IC Decoder/Demultiplexer.If the operating temperature is maintained at 0°C~70°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 4.75V~5.25V supply voltage, which gives it a lot of flexibility.The multiplexers from 74LS series can be used for a wide range of applications.There are 16 terminations included in its basic configuration.There is a base part number of 74LS138 which can also be used in order to locate the logic switch that are related to this item.In multiplexer's system, 5V is the voltage supplied.There are 16 component pins in this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a supply type of Single employed as part of this supply.A total of 16 pins are configured on this board.The mounting is in the way of Surface Mount.Among the family of LS the logic switch is a member.Signal multiplexer consists of 8 bits.In order for 5V to operate normally, a power supply is provided.In order for the turn signal switch to work, there are 8 outputs.Decoder/Drivers is the classification for this the digital switch ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.This multiplexer has a total of 3 inputs.During normal operation, the digitalswitch consists of 1 circuits. SN74LS138D FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V SN74LS138D ApplicationsThere are a lot of Texas Instruments SN74LS138D Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | CD74HCT139M OverviewFor the purpose of saving board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).The package is packaged in accordance with Tube.Digital switch ic uses a Surface Mount mounting method.The multiplexers uses an analog IC Decoder/Demultiplexer as the analog part of the circuit.The operating temperature of -55°C~125°C will not be susceptible to external factors.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.Multiplexers of the 74HCT series can be used in a wide range of applications.This configuration includes 16 terminations as part of its basic functionality.To find signal switch's related components, a base part number of 74HCT139 may also be used.For multiplexer's system, 5V voltage is supplied.A component pin count of 16 can be found on this turn signal switch.It employs GULL WING as the point at which conductors come to an end.The supply type of this multiplexer ic is Single.This multiplexer ic is configured with 16 pins.Surface Mount is the way it is mounted.The logic switch belongs to the family of HCT.Signal multiplexer consists of 4 bits.mux switch's normal operation requires the power supply of 5V.The turn signal switch operates with 4 outputs.In electronic terms, the digital switch ic is classified as Decoder/Drivers.It consumes 8μA current of multiplexer ic since it is not affected by external factors.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The configuration of the mux switch contains 2 elements. CD74HCT139M FeaturesSupplied in the 16-SOIC (0.154, 3.90mm Width) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V CD74HCT139M ApplicationsThere are a lot of Texas Instruments CD74HCT139M Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | CD74HCT157E OverviewDue to the fact that it is provided in the 16-DIP (0.300, 7.62mm), digital switch allows the board to be compacted.It is packaged in the way of Tube.As far as mounting is concerned, digital switch ic uses Through Hole.the multiplexers uses IC Multiplexer as the analog IC.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -55°C~125°C.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.With the 74HCT series, the multiplexers are suitable for a diverse range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.There is a base part number 74HCT157 that can be used to locate signal switch's related components as well.In this case, 5V is the voltage supplied to the multiplexer's system.A component pin count of 16 is found on this turn signal switch.In this case, the supply type is Single.A configuration of 16 pins is used.As you can see, it is mounted in the direction of Through Hole.The logic switch is included into the family of HCT.In the signal multiplexer, there are 2 bits available.The power supply of 5V is provided for mux switch's normal operation.This turn signal switch has 1 outputs designed for its operation.The performance of the multiplexers can be reliably maintained at a voltage of 5V.In this multiplexer, there is a total of 8 inputs.This turn signal switch's circuit uses 4 transmission channels. CD74HCT157E FeaturesSupplied in the 16-DIP (0.300, 7.62mm) package Adopting a supply type of Single Power supplies of 5V Operating with the supply voltage of 5V CD74HCT157E ApplicationsThere are a lot of Texas Instruments CD74HCT157E Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
Ultralife | SN74CB3Q3257PW OverviewDue to the lack of space on the board, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).The package is packaged in the manner of Tube.For mounting, digital switch ic uses the method Surface Mount.The analog IC in the multiplexers is identified as Multiplexer/Demultiplexer.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 2.3V~3.6V supply voltage, which gives it a lot of flexibility.Since they are members of the 74CB series, they can be used in a wide variety of applications.Among its basic features are 16 terminations.As its base part number is 74CB3Q3257, logic switch can also be used to find its related parts.For multiplexer's system, 2.5V voltage is supplied.This turn signal switch has a total of 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a supply type of Single employed as part of this supply.Currently, it is configured with 16 pins.It is mounted in the way of Surface Mount.In the CB3Q/3VH/3C/2B family, the logic switch is included.The multiplexer ic provides 4 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2.3V.Avoid unnecessary failures by keeping Vsup at 3.6V.There is a power supply provided for the mux switch's normal operation of 2.5/3.3V.As part of the operation of this turn signal switch, there are 2 outputs.The part belongs to the Other Logic ICs category of signal switches.Without any external influences, it consumes 1.5mA current of multiplexer ic at all times.The multiplexer is equipped with 8 inputs.The system operates with a resistance of 4Ohm.If the load is supplied with a voltage of 1.5mA, stability of the multiplexers can be maintained. SN74CB3Q3257PW FeaturesSupplied in the 16-TSSOP (0.173, 4.40mm Width) package Adopting a supply type of Single Power supplies of 2.5/3.3V Operating with the supply current of 1.5mA SN74CB3Q3257PW ApplicationsThere are a lot of Texas Instruments SN74CB3Q3257PW Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote | |||
APS | SY89843UMG OverviewProviding this information in the 24-VFQFN Exposed Pad, 24-MLF? enables digital switch board space to be saved.Tube represents its packaging.Digital switch ic uses a Surface Mount mounting method.The analog IC in the multiplexers is identified as Multiplexer.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 2.375V~2.625V 3V~3.6V voltage.The multiplexers can be used for a wide range of applications since they are members of Precision Edge? series.The base part number is 89843, so you can find its logic switch related parts using that number.In this case, the supply type is Single.A total of 24 pins are configured on this board.The multiplexer ic is mounted in the direction of Surface Mount.The turn signal switch operates with 2 outputs.It consumes 100mA current of multiplexer ic since it is not affected by external factors.In order to accept voltage levels, the multiplexers have input lines 2 on the board.There are 2 output lines designed to serve as the source of the signal.This turn signal switch's circuit uses 2 transmission channels.There is no problem with operating this signal switch at the maximum temperature of 85°C.The minimal operating temperature of the multiplexer should be maintained at -40°C.In accordance with the applicable device specifications, the signal switches operates at a maximum supply voltage of 3.6V.According to the applicable specification, the digital swith should operate at a minimum supply voltage of 2.375V. SY89843UMG FeaturesSupplied in the 24-VFQFN Exposed Pad, 24-MLF? package Adopting a supply type of Single 2 input lines 2 output lines SY89843UMG ApplicationsThere are a lot of Microchip Technology SY89843UMG Signal Switches / Multiplexers / Decoders applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.