Shine Ever will be exhibiting at ELECTRONICA in Munich Nov 12-15, 2024! COME VISIT US AT BOOTH 118/2, Hall C5

English

My Cart

Total：0Sub-Total : $0.00

Fiber Optic Cables(5578)

Part	Manufacturer	Description		Stock	Action
815-DAC60508ZYZFT	Ultralife	DAC60508ZYZFT Overview It is supplied in the 16-UFBGA, DSBGA package. This FPGA module can be attached to the development board with a Surface Mount. The operating temperature should be kept at -40°C~125°C TA when operating. This FPGA model is contained in Tape & Reel (TR) for space saving. It is designed with 16 terminations. Its base part number DAC60508 can be used to find related parts. It is designed with 16 pins. DAC60508ZYZFT Features 16-UFBGA, DSBGA package 16 pins DAC60508ZYZFT Applications There are a lot of Texas Instruments DAC60508ZYZFT Digital to Analog Converters (DAC) applications. Audio Amplifier Video Encoder Display Electronics Data Acquisition Systems Calibration Motor Control Data Distribution System Digital Potentiometer Software Radio Wireless infrastructure:	PDF	500 In-stock	Get Quote
815-TLV5606ID	Ultralife	TLV5606ID Overview A 8-SOIC (0.154, 3.90mm Width) package contains it, and it is available for download. In order for the device to operate, a supply voltage of 3V volts needs to be provided. Other Converters family FPGA part. Using a Surface Mount connector, you can mount this FPGA module on the development board. In order to ensure a safe and efficient operation, it is important to maintain a temperature within -40°C~85°C at all times. As a result of space limitations, this FPGA model has been included in Tube. In total, there are a total of 8 terminations on it. Parts related to this part can be found using its base part number TLV5606. The device has 8 pins which are included in the design. Its flexibility can be fully utili5Ved when operating with a 5V supply voltage. I am going to present you with a device that is equipped with 8 pins. The maximum supply voltage it supports is 5.5V. The device can function at a minimum voltage of 2.7V. TLV5606ID Features 8-SOIC (0.154, 3.90mm Width) package 8 pin count 8 pins TLV5606ID Applications There are a lot of Texas Instruments TLV5606ID Digital to Analog Converters (DAC)?applications. Low bandwidth data acquisition systems DAT Recorders and Players Automated Test Equipment Process control equipment Process Control and Industrial Automation RF signal generators, arbitrary waveform generators Bus Structured instruments Digital Offset & Gain Adjustment Instrumentation Industrial Control Systems	PDF	999 In-stock	Get Quote
815-TLV5628CDW	Ultralife	TLV5628CDW Overview There is a 16-SOIC (0.295, 7.50mm Width) package that includes this component. 3.3V volts power it. FPGA parts like this belong to the Other Converters family. An attachment Surface Mount allows the FPGA module to be attached to the development board. Operating temperatures should be maintained within the 0°C~70°C range at all times when the unit is in use. As a space-saving measure, this FPGA model is contained within Tube. In total, the terminations of this piece are 16. Its base part number TLV5628 can be used to find parts that are related to it. In this case, there are 16 pins on the board. When operating with the supply voltage of 3.3V, designers can fully make use of its flexibility. There are a total of 16 pins on this device. The maximum supply voltage it supports is 5.25V. The minimal supply voltage required for it is 2.7V. TLV5628CDW Features 16-SOIC (0.295, 7.50mm Width) package 16 pin count 16 pins the output voltage of 300mV TLV5628CDW Applications There are a lot of Texas Instruments TLV5628CDW Digital to Analog Converters (DAC)?applications. Data Acquisition Systems LMDS/MMDS, point-to-point Low bandwidth data acquisition systems Precision setpoint control Process Control and Industrial Automation Optical Networks Microprocessor Controlled Calibration Set Top Boxes Calibration Portable Equipment	PDF	999 In-stock	Get Quote
815-DAC7621E	Ultralife	DAC7621E Overview The package that contains this software is called 20-SSOP (0.209, 5.30mm Width). In order for the device to operate, a supply voltage of 5V volts needs to be provided. Part of the Other Converters family, this FPGA part is a programmable gate array. FPGA modules can be attached to development boards using a Surface Mount-connector. It is recommended that the operating temperature be kept within the range -40°C~85°C while the machine is operating. It is designed to maximiTubee space efficiency by containing the FPGA model in Tube. In total, it has a total of 20 terminations. If you are looking for related parts, you can use the base part number DAC7621 as a starting point. In this case, 20 pins are used in the design. Design engineers can fully take advantage of its flexibility when operating at 5V supply voltage. In order for it to work, it requires a 5V power supply. A total of 20 pins are included in this device. This device is capable of supporting a maximum supply voltage of 5.25V. Using 4.75V as the minimum supply voltage, it can operate. DAC7621E Features 20-SSOP (0.209, 5.30mm Width) package 20 pin count 20 pins DAC7621E Applications There are a lot of Texas Instruments DAC7621E Digital to Analog Converters (DAC) applications. Calibration Motor Control Data Distribution System Digital Potentiometer Software Radio Wireless infrastructure: WCDMA, CDMA2000, TD-SCDMA, WiMAX Wideband communications: LMDS/MMDS, point-to-point Instrumentation:	PDF	10777 In-stock	Get Quote
815-TLC5628CDW	Ultralife	TLC5628CDW Overview In the 16-SOIC (0.295, 7.50mm Width) package, you will find it. It is powered from a supply voltage of 5V. This FPGA part belongs to the family of Other Converters. FPGA modules can be attached to development boards using a Surface Mount-connector. In order to ensure a safe and efficient operation, it is important to maintain a temperature within 0°C~70°C at all times. A model of this FPGA is contained in Tube for the purpose of saving space. In total, there are a total of 16 terminations on it. In order to find related parts, you can use its base part number TLC5628. 16 pins are designed into the device. The 5V supply voltage provides designers with full flexibility in their designs. It operates from a 5V power supply. It is equipped with 16 pin count. A maximum voltage of 5.25V can be supplied to it. With a minimum supply voltage of 4.75V, it can operate. TLC5628CDW Features 16-SOIC (0.295, 7.50mm Width) package 16 pin count 16 pins the output voltage of 3.5V TLC5628CDW Applications There are a lot of Texas Instruments TLC5628CDW Digital to Analog Converters (DAC)?applications. Direct Digital Waveform Generation Instrumentation Level Setting Low Power Systems Closed-loop process control Digital Potentiometer High-End Compact Disc Players Low Cost I/O Industrial Process Control Automatic Test Equipment	PDF	999 In-stock	Get Quote
815-TLV5616CD	Ultralife	TLV5616CD Overview A 8-SOIC (0.154, 3.90mm Width) package contains it, and it is available for download. Power is provided by a 3V-volt supply. An FPGA part from the Other Converters family. The Surface Mount-slot connector on the FPGA module can be connected to the development board. Operating temperatures should be maintained within the 0°C~70°C range at all times when the unit is in use. A model of this FPGA is contained in Tube for the purpose of saving space. In total, there are a total of 8 terminations on it. For related parts, use its base part number TLV5616. This cable has 8 pins and is designed to connect to a computer. With a 5V supply voltage, designers can fully utili5Ve the flexibility of the device. Featuring 8 pins in total, it is a versatile device. It can take a maximum of 5.5V as the supply voltage. Using a supply voltage as low as 2.7V, it will work. TLV5616CD Features 8-SOIC (0.154, 3.90mm Width) package 8 pin count 8 pins TLV5616CD Applications There are a lot of Texas Instruments TLV5616CD Digital to Analog Converters (DAC) applications. Software Radio Wireless infrastructure: WCDMA, CDMA2000, TD-SCDMA, WiMAX Wideband communications: LMDS/MMDS, point-to-point Instrumentation: RF signal generators, arbitrary waveform generators Mobile Communications Process Control and Industrial Automation Automatic Test Equipment	PDF	7900 In-stock	Get Quote
815-DAC8165IDPW	Ultralife	DAC8165IDPW Overview The package that contains this software is called 16-TSSOP (0.173, 4.40mm Width). Supply voltage is 3V volts. The Other Converters family of FPGA parts includes this part. FPGA modules can be attached to development boards using a Surface Mount-connector. In order to ensure a safe and efficient operation, it is important to maintain a temperature within -40°C~105°C at all times. Using the Tube layout, this FPGA model can be contained in a very small amount of space. In total, the terminations of this piece are 16. Its base part number DAC8165 can be used to find related parts. It has a total of 16 pins that are designed for it. Power is supplied to the device by a 3/5V battery. It is equipped with 16 pin count. The maximum supply voltage it supports is 5.5V. As long as the supply voltage is at least 2.7V, it is able to work properly. DAC8165IDPW Features 16-TSSOP (0.173, 4.40mm Width) package 16 pin count 16 pins DAC8165IDPW Applications There are a lot of Texas Instruments DAC8165IDPW Digital to Analog Converters (DAC)?applications. Optical Networks Microprocessor Controlled Calibration Software Radio Calibration Microprocessor Controlled Circuits Digitally Controlled Attenuators and Power Supplies Digital Potentiometer Voltage Set Point Control Data Acquisition Systems Software Controlled Gain Adjustment	PDF	999 In-stock	Get Quote
815-DAC712UL	Ultralife	DAC712UL Overview A 28-SOIC (0.295, 7.50mm Width) package is provided with this component. Power is provided by a 15V-volt supply. FPGA parts like this belong to the Other Converters family. Surface Mount-connectors can be used to attach this FPGA module to the development board. In order to ensure a safe and efficient operation, it is important to maintain a temperature within 0°C~70°C at all times. Using the Tube layout, this FPGA model can be contained in a very small amount of space. It is designed with 28 terminations. You can find related parts by using the part number DAC712, which is its base part number. It is designed with 28 pins. I am going to present you with a device that is equipped with 28 pins. It supports the maximal supply voltage of 16.5V. Using 11.4V as the minimum supply voltage, it can operate. DAC712UL Features 28-SOIC (0.295, 7.50mm Width) package 28 pin count 28 pins DAC712UL Applications There are a lot of Texas Instruments DAC712UL Digital to Analog Converters (DAC)?applications. Process control equipment Data Acquisition Process Control and Industrial Automation Digital Calibration Synchro Applications Instrumentation Wireless infrastructure: Industrial Control Systems General Purpose Trimming Adjustments Low Power Systems	PDF	999 In-stock	Get Quote
815-DAC7734EC	Ultralife	DAC7734EC Overview As part of the 48-BSSOP (0.295, 7.50mm Width) package, it is included. It is powered from a supply voltage of 15V. There is a Other Converters family component in this FPGA part. This FPGA module can be attached to the development board with a Surface Mount. During the operation of the system, the operating temperature should remain within the range of -40°C~85°C. Unlike other FPGA models, this one is contained in Tube for the sake of space saving. As a whole, it has 48 terminations. If you are looking for related parts, you can use the base part number DAC7734 as a starting point. In this case, there are 48 pins on the board. Designers can fully utili15Ve its flexibility with 15V supply voltage. I am going to present you with a device that is equipped with 48 pins. A maximum voltage of 15.75V can be supplied to it. It is able to work with the minimal supply voltage of 14.25V. DAC7734EC Features 48-BSSOP (0.295, 7.50mm Width) package 48 pin count 48 pins DAC7734EC Applications There are a lot of Texas Instruments DAC7734EC Digital to Analog Converters (DAC)?applications. Digitally Controlled Attenuators and Power Supplies Software Controlled Gain Adjustment Calibration Display Electronics Wireless infrastructure: Bus Structured instruments Low bandwidth data acquisition systems Gain and offset adjustment Data Distribution System Data Acquisition	PDF	999 In-stock	Get Quote
815-DAC7644EB	Ultralife	DAC7644EB Overview There are two packages that contain it: 48-BSSOP (0.295, 7.50mm Width) package and X package. Power is provided by a 5V-volt supply. A Other Converters-series FPGA part. An attachment Surface Mount allows the FPGA module to be attached to the development board. As far as the operating temperature is concerned, it should be kept within -40°C~85°C when operating. This FPGA model is contained in Tube for space saving. In total, it has 48 terminations on each end. In order to find related parts, use the part number DAC7644 as a base. In order to make it work, 48 pins have been designed. A 5V-volt supply allows designers to fully utili5Ve its flexibility. This device has a pin count of 48 in it. The maximum supply voltage it supports is 5.25V. Using 4.75V as the minimum supply voltage, it can operate. DAC7644EB Features 48-BSSOP (0.295, 7.50mm Width) package 48 pin count 48 pins DAC7644EB Applications There are a lot of Texas Instruments DAC7644EB Digital to Analog Converters (DAC)?applications. Data Distribution System Industrial Process Control Digital Audio Amplifiers Wireless infrastructure: Level Setting Precision setpoint control Gain and offset adjustment DAT Recorders and Players Set Top Boxes Low Cost I/O	PDF	999 In-stock	Get Quote
815-DAC8163SDSCR	Ultralife	DAC8163SDSCR Overview The package that contains this software is called 10-WFDFN Exposed Pad. In order for the device to operate, a supply voltage of 3.6V volts needs to be provided. Part of the Other Converters family, this FPGA part is a programmable gate array. FPGA modules can be attached to development boards using a Surface Mount-connector. It is recommended that the operating temperature be kept within the range -40°C~125°C while the machine is operating. It is designed to maximiCut Tape (CT)e space efficiency by containing the FPGA model in Cut Tape (CT). In total, it has a total of 10 terminations. If you are looking for related parts, you can use the base part number DAC8163 as a starting point. In this case, 10 pins are used in the design. In order for it to work, it requires a 3/5V power supply. A total of 10 pins are included in this device. This device is capable of supporting a maximum supply voltage of 5.5V. Using 2.7V as the minimum supply voltage, it can operate. DAC8163SDSCR Features 10-WFDFN Exposed Pad package 10 pin count 10 pins DAC8163SDSCR Applications There are a lot of Texas Instruments DAC8163SDSCR Digital to Analog Converters (DAC) applications. Calibration Motor Control Data Distribution System Digital Potentiometer Software Radio Wireless infrastructure: WCDMA, CDMA2000, TD-SCDMA, WiMAX Wideband communications: LMDS/MMDS, point-to-point Instrumentation:	PDF	999 In-stock	Get Quote
815-DAC8163TDGSR	Ultralife	DAC8163TDGSR Overview The package that contains this software is called 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). In order for the device to operate, a supply voltage of 5.5V volts needs to be provided. FPGA modules can be attached to development boards using a Surface Mount-connector. It is recommended that the operating temperature be kept within the range -40°C~125°C while the machine is operating. It is designed to maximiTape & Reel (TR)e space efficiency by containing the FPGA model in Tape & Reel (TR). In total, it has a total of 10 terminations. If you are looking for related parts, you can use the base part number DAC8163 as a starting point. In this case, 10 pins are used in the design. In my opinion, this FPGA could produce fantastic results if mounted in Surface Mount, provided that its specifications are followed. Design engineers can fully take advantage of its flexibility when operating at 3.3V supply voltage. This device is capable of supporting a maximum supply voltage of 5.5V. Using 2.7V as the minimum supply voltage, it can operate. DAC8163TDGSR Features 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package 10 pins DAC8163TDGSR Applications There are a lot of Texas Instruments DAC8163TDGSR Digital to Analog Converters (DAC) applications. Calibration Motor Control Data Distribution System Digital Potentiometer Software Radio Wireless infrastructure: WCDMA, CDMA2000, TD-SCDMA, WiMAX Wideband communications: LMDS/MMDS, point-to-point Instrumentation:	PDF	999 In-stock	Get Quote
815-TLC5628IN	Ultralife	TLC5628IN Overview There are two packages that contain it: 16-DIP (0.300, 7.62mm) package and X package. The supply voltage is 5V volts. In this case, the FPGA part belongs to the Other Converters family. An attachment Through Hole allows the FPGA module to be attached to the development board. When operating the machine, it is important to keep the temperature within -40°C~85°C range. There is an FPGA model contained in Tube in order to conserve space. In total, it has 16 terminations on each end. In order to find related parts, use the part number TLC5628 as a base. In this case, there are 16 pins on the board. The 5V supply voltage provides designers with full flexibility in their designs. The device runs on a 5V battery and requires no additional power supply to operate. This device has a pin count of 16 in it. A maximum supply voltage of 5.25V can be applied to this product. The minimal supply voltage required for it is 4.75V. TLC5628IN Features 16-DIP (0.300, 7.62mm) package 16 pin count 16 pins the output voltage of 3.5V TLC5628IN Applications There are a lot of Texas Instruments TLC5628IN Digital to Analog Converters (DAC) applications. Digital Potentiometer Software Radio Wireless infrastructure: WCDMA, CDMA2000, TD-SCDMA, WiMAX Wideband communications: LMDS/MMDS, point-to-point Instrumentation: RF signal generators, arbitrary waveform generators Mobile Communications Process Control and Industrial Automation	PDF	8893 In-stock	Get Quote
815-DAC8163SDGSR	Ultralife	DAC8163SDGSR Overview As part of the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, it is included. It is powered from a supply voltage of 3.6V. In this case, the FPGA part belongs to the Other Converters family. Using a Surface Mount connector, you can mount this FPGA module on the development board. The operating temperature should be kept at -40°C~125°C when operating. Unlike other FPGA models, this one is contained in Cut Tape (CT) for the sake of space saving. Total terminations are 10. For related parts, use its base part number DAC8163. It has a total of 10 pins that are designed for it. In order for it to work, it requires a 3/5V power supply. In addition to this, it has 10 pins. A maximum supply voltage of 5.5V can be applied to this product. It is able to work with the minimal supply voltage of 2.7V. DAC8163SDGSR Features 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package 10 pin count 10 pins DAC8163SDGSR Applications There are a lot of Texas Instruments DAC8163SDGSR Digital to Analog Converters (DAC)?applications. RF signal generators, arbitrary waveform generators General Purpose Trimming Adjustments Automotive Data Acquisition Set Top Boxes Function Generators Automated Test Equipment Motor Control Data Acquisition Systems Closed-loop process control	PDF	999 In-stock	Get Quote
815-DAC8562TDGSR	Ultralife	DAC8562TDGSR Overview In the package 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), this product is provided. Supply voltage is 5.5V volts. By attaching the Surface Mount connector, you can use this FPGA module with your development board. It is necessary to keep the operating temperature within -40°C~125°C when the device is operating. As a result of space limitations, this FPGA model has been included in Tape & Reel (TR). In total, the terminations of this piece are 10. DAC8562 is the base part number that can be used to identify related parts. The device has 10 pins which are included in the design. I think, as long as this FPGA is mounted in Surface Mount, it could perform excellently according to its specifications as long as you mount it in Surface Mount. In operation with 3.3V, designers can take advantage of its flexibility to the fullest extent. The maximum supply voltage it can take is 5.5V. The device can function at a minimum voltage of 2.7V. DAC8562TDGSR Features 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package 10 pins DAC8562TDGSR Applications There are a lot of Texas Instruments DAC8562TDGSR Digital to Analog Converters (DAC) applications. Wireless infrastructure: WCDMA, CDMA2000, TD-SCDMA, WiMAX Wideband communications: LMDS/MMDS, point-to-point Instrumentation: RF signal generators, arbitrary waveform generators Mobile Communications Process Control and Industrial Automation Automatic Test Equipment Portable Equipment	PDF	9641 In-stock	Get Quote
815-TLV5613IDW	Ultralife	TLV5613IDW Overview A 20-SOIC (0.295, 7.50mm Width) package contains it, and it is available for download. In order for the device to operate, a supply voltage of 5V volts needs to be provided. Other Converters family FPGA part. The Surface Mount-slot connector on the FPGA module can be connected to the development board. The operating temperature should be kept at -40°C~85°C when operating. Using the Tube layout, this FPGA model can be contained in a very small amount of space. Total terminations are 20. Its base part number TLV5613 can be used to find related parts. 20 pins are designed into the device. This is a battery operated device that operates on 3/5V. A total of 20 pins are included in this device. The maximum supply voltage it can take is 5.5V. The minimal supply voltage required for it is 2.7V. TLV5613IDW Features 20-SOIC (0.295, 7.50mm Width) package 20 pin count 20 pins the output voltage of 400mV TLV5613IDW Applications There are a lot of Texas Instruments TLV5613IDW Digital to Analog Converters (DAC)?applications. Level Setting Digital Radio Link Optical Networks LMDS/MMDS, point-to-point Function Generaion Motor Control Low Cost I/O Data Distribution System Precision setpoint control Portable Equipment	PDF	999 In-stock	Get Quote
815-DAC8162SDGSR	Ultralife	DAC8162SDGSR Overview As part of the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, it is included. In order to operate it, a voltage supply of 3.6V volts is required. An FPGA part from the Other Converters family. FPGA modules can be attached to development boards using a Surface Mount-connector. In order to ensure a safe and efficient operation, it is important to maintain a temperature within -40°C~125°C at all times. It is designed to maximiCut Tape (CT)e space efficiency by containing the FPGA model in Cut Tape (CT). In total, the terminations of this piece are 10. Its base part number DAC8162 can be used to find parts that are related to it. There are 10 pins on this device. This is a battery operated device that operates on 3/5V. There are a total of 10 pins on this device. It can take a maximum of 5.5V as the supply voltage. The unit is capable of working with a minimum supply voltage of 2.7V. DAC8162SDGSR Features 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package 10 pin count 10 pins DAC8162SDGSR Applications There are a lot of Texas Instruments DAC8162SDGSR Digital to Analog Converters (DAC)?applications. Function Generaion Software Radio Bus Structured instruments Automatic Test Equipment Programmable Power Supplies Software Controlled Gain Adjustment Wireless infrastructure: Precision setpoint control Data Acquisition Systems Digitally controlled calibration	PDF	999 In-stock	Get Quote
feilidi-DAC8162SQDGSRQ1	Ultralife	<h3>DAC8162SQDGSRQ1 Overview</h3><div><br/>In the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, you will find it. Supply voltage is 5V volts. A Other Converters-series FPGA part. FPGA modules can be attached to development boards using a Surface Mount-connector. The Automotive, AEC-Q100 Series is one of the types of FPGAs that belong to this type. The operating temperature should be kept at -40°C~125°C when operating. It is designed to maximiTape & Reel (TR)e space efficiency by containing the FPGA model in Tape & Reel (TR). In total, it has 10 terminations on each end. For related parts, use its base part number DAC8162. The device has 10 pins which are included in the design. As long as this FPGA is mounted in Surface Mount, it should be able to function as it should in terms of its specifications, as well as its capabilities. There is a 3/5V power supply that is required to operate it. A maximum voltage of 5.5V can be supplied to it. As long as the supply voltage is at least 2.7V, it is able to work properly. <br/><br/></div><h3>DAC8162SQDGSRQ1 Features</h3><div><br/>10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package<br/>10 pins<br/> Automotive, AEC-Q100 series<br/><br/></div><h3>DAC8162SQDGSRQ1 Applications</h3><div><br/>There are a lot of Texas Instruments DAC8162SQDGSRQ1 Digital to Analog Converters (DAC)?applications. <br/><br/></div><ul style="padding: 0px; margin: 0px;"><li>Digital Audio Amplifiers<!--<li--></li><li>Precision setpoint control<!--<li--></li><li>Bus Structured instruments<!--<li--></li><li>Waveform Reconstruction<!--<li--></li><li>Industrial Process Control<!--<li--></li><li>Data Distribution System<!--<li--></li><li>Synthesizers and Keyboards<!--<li--></li><li>Display Electronics<!--<li--></li><li>Digital Offset & Gain Adjustment<!--<li--></li><li>Instrumentation<!--<li--></li></ul>	PDF	2000 In-stock	Get Quote
815-TLV5629IPW	Ultralife	TLV5629IPW Overview A 20-TSSOP (0.173, 4.40mm Width) package contains it, and it is available for download. In order for the device to operate, a supply voltage of 3V volts needs to be provided. The Other Converters family of FPGAs includes this part. Using a Surface Mount connector, you can mount this FPGA module on the development board. The operating temperature should be kept at -40°C~85°C when operating. It is designed to maximiTubee space efficiency by containing the FPGA model in Tube. The total number of terminations is 20. In order to find related parts, you can use its base part number TLV5629. It is designed with 20 pins. Power is supplied to the device by a 3/5V battery. In addition to this, it has 20 pins. It supports the maximal supply voltage of 5.5V. With a minimum supply voltage of 2.7V, it is able to function. TLV5629IPW Features 20-TSSOP (0.173, 4.40mm Width) package 20 pin count 20 pins the output voltage of 300mV TLV5629IPW Applications There are a lot of Texas Instruments TLV5629IPW Digital to Analog Converters (DAC)?applications. Direct Digital Waveform Generation Data Distribution System Display Electronics Software Controlled Gain Adjustment Digital Audio Amplifiers Precision AGC Circuits Waveform Reconstruction Voltage Set Point Control Portable battery-powered instruments Wireless infrastructure:	PDF	999 In-stock	Get Quote
815-DAC8562SDSCR	Ultralife	DAC8562SDSCR Overview It is supplied in the 10-WFDFN Exposed Pad package. It is powered from a supply voltage of 3.6V. This FPGA part belongs to the family of Other Converters. This FPGA module can be attached to the development board with a Surface Mount. The operating temperature should be kept at -40°C~125°C when operating. This FPGA model is contained in Cut Tape (CT) for space saving. It is designed with 10 terminations. Its base part number DAC8562 can be used to find related parts. It is designed with 10 pins. It operates from a 3/5V power supply. It is equipped with 10 pin count. It supports the maximal supply voltage of 5.5V. It is able to work with the minimal supply voltage of 2.7V. DAC8562SDSCR Features 10-WFDFN Exposed Pad package 10 pin count 10 pins DAC8562SDSCR Applications There are a lot of Texas Instruments DAC8562SDSCR Digital to Analog Converters (DAC) applications. Audio Amplifier Video Encoder Display Electronics Data Acquisition Systems Calibration Motor Control Data Distribution System Digital Potentiometer Software Radio Wireless infrastructure:	PDF	2561 In-stock	Get Quote
815-DAC8164IAPW	Ultralife	DAC8164IAPW Overview The package that contains this software is called 16-TSSOP (0.173, 4.40mm Width). It is powered from a supply voltage of 3V. A Other Converters-series FPGA part. With a Surface Mount connector, this FPGA module can be attached to the development board. Operating temperatures should be maintained within the -40°C~105°C range at all times when the unit is in use. It is for space saving reasons that this FPGA model is contained in Tube. In total, it has a total of 16 terminations. DAC8164 is the base part number that can be used to identify related parts. This cable has 16 pins and is designed to connect to a computer. There is a 3/5V power supply that is required to operate it. This device has a pin count of 16 in it. In addition, it is able to support a maximum supply voltage of 5.5V. As long as the supply voltage is at least 2.7V, it is able to work properly. DAC8164IAPW Features 16-TSSOP (0.173, 4.40mm Width) package 16 pin count 16 pins DAC8164IAPW Applications There are a lot of Texas Instruments DAC8164IAPW Digital to Analog Converters (DAC)?applications. Video Encoder Digitally Controlled Attenuators and Power Supplies Digital Audio Amplifiers Digitally controlled calibration Precision setpoint control Microprocessor Controlled Calibration Display Electronics Calibration Wireless infrastructure: Basestations	PDF	999 In-stock	Get Quote
815-DAC128S085CISQX/NOPB	Ultralife	DAC128S085CISQX/NOPB Overview As part of the 16-WFQFN Exposed Pad package, it is included. It is powered from a supply voltage of 3V. This FPGA part belongs to the family of Other Converters. FPGA modules can be attached to development boards using a Surface Mount-connector. While operating, the operating temperature should be kept within a range of -40°C~125°C. Unlike other FPGA models, this one is contained in Tape & Reel (TR) for the sake of space saving. In total, there are a total of 16 terminations on it. In order to find related parts, you can use its base part number DAC128S085. Power is supplied to the device by a 3/5V battery. This device has a pin count of 16 in it. DAC128S085CISQX/NOPB Features 16-WFQFN Exposed Pad package 16 pin count DAC128S085CISQX/NOPB Applications There are a lot of Texas Instruments DAC128S085CISQX/NOPB Digital to Analog Converters (DAC)?applications. Digital Radio Link WCDMA, CDMA2000, TD-SCDMA, WiMAX Optical Networks Portable Equipment Digital Potentiometer Precision AGC Circuits Wideband communications: Digital Offset & Gain Adjustment Level Setting High-End Compact Disc Players	PDF	999 In-stock	Get Quote
815-DAC8532IDGKR	Ultralife	DAC8532IDGKR Overview A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package contains it, and it is available for download. Power is provided by a 3V-volt supply. Part of the Other Converters family, this FPGA part is a programmable gate array. The Surface Mount-slot connector on the FPGA module can be connected to the development board. While operating, the operating temperature should be kept within a range of -40°C~105°C. This FPGA model is contained in Tape & Reel (TR) for space saving. Total terminations are 8. For related parts, use its base part number DAC8532. The device is designed with 8 pins in total. Power is provided by a 3/5V battery that is included with the device. It is equipped with 8 pin count. It can accept a maximum voltage of 5.5V volts as a supply voltage. The unit is capable of working with a minimum supply voltage of 2.7V. DAC8532IDGKR Features 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package 8 pin count 8 pins DAC8532IDGKR Applications There are a lot of Texas Instruments DAC8532IDGKR Digital to Analog Converters (DAC)?applications. Display Electronics Digital Radio Link Software Radio Synchro Applications Portable Equipment Gain and offset adjustment Digitally Controlled Attenuators and Power Supplies Automotive Instrumentation: Function Generaion	PDF	999 In-stock	Get Quote
815-DAC900U	Ultralife	DAC900U Overview As part of the 28-SOIC (0.295, 7.50mm Width) package, it is included. It is powered from a supply voltage of 5V. The Other Converters family of FPGAs includes this part. FPGA modules can be attached to development boards using a Surface Mount-connector. This is a type of FPGA that is part of the SpeedPlus? series of FPGAs. It is important to maintain the operating temperature within the range of -40°C~85°C when operating the machine. It is for space saving reasons that this FPGA model is contained in Tube. It is designed with 28 terminations. In order to find related parts, you can use its base part number DAC900. There are 28 pins on this device. Its flexibility can be fully utili5Ved when operating with a 5V supply voltage. This is a battery operated device that operates on 5V. It is equipped with 28 pin count. In addition, it is able to support a maximum supply voltage of 5.5V. With a minimum supply voltage of 2.7V, it can operate. DAC900U Features 28-SOIC (0.295, 7.50mm Width) package 28 pin count 28 pins SpeedPlus? series DAC900U Applications There are a lot of Texas Instruments DAC900U Digital to Analog Converters (DAC)?applications. RF signal generators, arbitrary waveform generators Low bandwidth data acquisition systems Display Electronics Portable Equipment Bus Structured instruments LMDS/MMDS, point-to-point Digitally Controlled Attenuators and Power Supplies Digital Radio Link Programmable Power Supplies Low Cost I/O	PDF	999 In-stock	Get Quote
815-DAC70004IDMDT	Ultralife	DAC70004IDMDT Overview There are two packages that contain it: 14-VFDFN Exposed Pad package and X package. An attachment Surface Mount allows the FPGA module to be attached to the development board. It is necessary to keep the operating temperature within -40°C~125°C when the device is operating. As a result of space limitations, this FPGA model has been included in Tape & Reel (TR). The total number of terminations is 14. Related parts can be found by using its base part number DAC70004. DAC70004IDMDT Features 14-VFDFN Exposed Pad package DAC70004IDMDT Applications There are a lot of Texas Instruments DAC70004IDMDT Digital to Analog Converters (DAC)?applications. Display Electronics Direct Digital Waveform Generation Automated Test Equipment RF signal generators, arbitrary waveform generators Low bandwidth data acquisition systems Instrumentation: Audio Amplifier Synchro Applications Industrial Process Control Set Top Boxes	PDF	999 In-stock	Get Quote
815-TLV5636IDGKR	Ultralife	TLV5636IDGKR Overview This package is included in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package and is available for purchase. It is powered from a supply voltage of 3V. Part of the Other Converters family, this FPGA part is a programmable gate array. FPGA modules can be attached to development boards using a Surface Mount-connector. Operating temperatures should be maintained within the -40°C~85°C range at all times when the unit is in use. Using the Tape & Reel (TR) layout, this FPGA model can be contained in a very small amount of space. 8 terminations are present in total. Related parts can be found by using its base part number TLV5636. The device has 8 pins which are included in the design. An external power supply of 3/5V is required to power the device. As far as the pin count is concerned, it has 8 pins. It supports the maximal supply voltage of 5.5V. The device can function at a minimum voltage of 2.7V. TLV5636IDGKR Features 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package 8 pin count 8 pins TLV5636IDGKR Applications There are a lot of Texas Instruments TLV5636IDGKR Digital to Analog Converters (DAC)?applications. Low Cost I/O Microprocessor Controlled Circuits Low Power Systems Synthesizers and Keyboards Wideband communications: Instrumentation Data Distribution System Motor Control Programmable Power Supplies Precision setpoint control	PDF	999 In-stock	Get Quote
815-DAC70504RTER	Ultralife	DAC70504RTER Overview As part of the 16-WFQFN Exposed Pad package, it is included. This FPGA module can be attached to the development board with a Surface Mount. While operating, the operating temperature should be kept within a range of -40°C~125°C TA. In order to save space, this FPGA model has been contained in Tape & Reel (TR). In total, the terminations of this piece are 16. If you are looking for related parts, you can use the base part number DAC70504 as a starting point. In order to make it work, 16 pins have been designed. DAC70504RTER Features 16-WFQFN Exposed Pad package 16 pins DAC70504RTER Applications There are a lot of Texas Instruments DAC70504RTER Digital to Analog Converters (DAC)?applications. Video Encoder Precision AGC Circuits Automatic Test Equipment Low Power Systems Industrial Control Systems Function Generators Process Control and Industrial Automation Display Electronics General Purpose Trimming Adjustments Industrial Process Control	PDF	999 In-stock	Get Quote
815-DAC8811IBDGKR	Ultralife	DAC8811IBDGKR Overview As part of the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, it is included. It is powered from a supply voltage of 5V. A Other Converters-series FPGA part. Using a Surface Mount connector, you can mount this FPGA module on the development board. It is necessary to keep the operating temperature within -40°C~85°C when the device is operating. As a result of space limitations, this FPGA model has been included in Tape & Reel (TR). It is designed with 8 terminations. Its base part number DAC8811 can be used to find parts that are related to it. The device has 8 pins which are included in the design. An external power supply of 3/5V is required to power the device. I am going to present you with a device that is equipped with 8 pins. This device is capable of supporting a maximum supply voltage of 5.5V. A minimal supply voltage of 2.7V is required for it to operate. DAC8811IBDGKR Features 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package 8 pin count 8 pins DAC8811IBDGKR Applications There are a lot of Texas Instruments DAC8811IBDGKR Digital to Analog Converters (DAC)?applications. Instrumentation: Software Radio Precision setpoint control Data Acquisition Systems Gain and offset adjustment WCDMA, CDMA2000, TD-SCDMA, WiMAX Digital Radio Link Basestations Waveform Reconstruction Optical Networks	PDF	999 In-stock	Get Quote
815-TLV5618AQDR	Ultralife	TLV5618AQDR Overview A 8-SOIC (0.154, 3.90mm Width) package is provided with this component. In order for the device to operate, a supply voltage of 3V volts needs to be provided. The Other Converters family of FPGAs includes this part. By attaching the Surface Mount connector, you can use this FPGA module with your development board. Operating temperatures should be maintained within the -40°C~125°C range at all times when the unit is in use. It is for space saving reasons that this FPGA model is contained in Tape & Reel (TR). It is designed with 8 terminations. In order to find related parts, you can use its base part number TLV5618. The device has 8 pins which are included in the design. There is a 3/5V power supply that is required to operate it. The device has a total of 8 pins on it. In addition, it is able to support a maximum supply voltage of 5.5V. Using 2.7V as the minimum supply voltage, it can operate. TLV5618AQDR Features 8-SOIC (0.154, 3.90mm Width) package 8 pin count 8 pins TLV5618AQDR Applications There are a lot of Texas Instruments TLV5618AQDR Digital to Analog Converters (DAC)?applications. RF signal generators, arbitrary waveform generators Precision setpoint control Basestations Motor Control Synchro Applications Mobile Communications Data Distribution System Synthesizers and Keyboards Automotive Digital Radio Link	PDF	999 In-stock	Get Quote
815-DAC8805QDBTR	Ultralife	DAC8805QDBTR Overview There is a 38-TFSOP (0.173, 4.40mm Width) package that includes this component. It is powered from a supply voltage of 5V. FPGA parts like this belong to the Other Converters family. Surface Mount-connectors can be used to attach this FPGA module to the development board. It is necessary to keep the operating temperature within -40°C~125°C when the device is operating. As a space-saving measure, this FPGA model is contained within Tape & Reel (TR). Total terminations are 38. Its base part number DAC8805 can be used to find parts that are related to it. In order to make it work, 38 pins have been designed. An external power supply of 3/5V is required to power the device. With a total of 38 pins, it is equipped with a high level of security. The maximum supply voltage it supports is 5.5V. With a minimum supply voltage of 2.7V, it is able to function. DAC8805QDBTR Features 38-TFSOP (0.173, 4.40mm Width) package 38 pin count 38 pins DAC8805QDBTR Applications There are a lot of Texas Instruments DAC8805QDBTR Digital to Analog Converters (DAC)?applications. Digitally Controlled Attenuators and Power Supplies Precision AGC Circuits Data Distribution System Video Encoder Industrial Process Control Digital Calibration Digitally controlled calibration Automated Test Equipment Basestations Instrumentation:	PDF	999 In-stock	Get Quote