Shine Ever will be exhibiting at ELECTRONICA in Munich Nov 12-15, 2024! COME VISIT US AT BOOTH 118/2, Hall C5
My CartFlat Flex Cables (FFC, FPC)(1149)
| Image | Part | Manufacturer | Description | Stock | Action | |
|---|---|---|---|---|---|---|
| STMicroelectronics | M41T11MH6F Overview28-SOP (0.350, 8.89mm Width) with SNAPHAT Sockets is where you'll find real time clocks.There is a way to package time clock in the form of a Tape & Reel (TR).This electrical RTC receives its power from the 2V~5.5V supply voltage.The type of this electrical real time clock is Clock/Calendar.There is an electronic component mounted in the way of Surface Mount.Electronic time clocks are recommended to operate at a temperature of -40°C~85°C.In order to ensure Leap Year, NVSRAM when operating, a certain value has to be set.The 28 termination is the practice of terminating a transmission line with a RTC module matched to its characteristic impedance.It has a total of 28 pins on it.The M41T11 family contains RTCs .It is important to keep in mind that the supply voltage of this electrical digital time clock is 2.5V~3.5V.Timer or RTC includes this component as part of its contents.A frequency of 0.032MHz should not be exceeded by real time clocks' output.There is a type of mounting for this RTC module: Surface Mount.It operates from 2.5/5V power supplies.There are 28 pins, which are pronged contacts as part of a signal interface in a computer or other communications real time clock. M41T11MH6F Features28-SOP (0.350, 8.89mm Width) with SNAPHAT Sockets package 28 terminations 28 pin count 2.5/5V power supplies M41T11MH6F ApplicationsThere are a lot of STMicroelectronics M41T11MH6F Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | M41T0M6F OverviewIn the package 8-SOIC (0.154, 3.90mm Width), you will find real time clocks, and you will be able to install real time clocks.Packaged as Tape & Reel (TR).As far as the supply voltage for this electrical RTC is concerned, it is 2V~5.5V.The type of this electrical real time clock is Clock/Calendar.The real time clock (RTC) that is mounted in the way of Surface Mount is connected to this circuit board.Electronic time clocks are recommended to operate at a temperature of -40°C~85°C.When a transmission line is terminated with 8 terminations, it means that the RTC module that terminates the line matches its characteristic impedance.In this case, the voltage supplied to the electronic component is 3V.Due to its 8 pins, it has the necessary features.Thare RTCs em are part of the family M41T0.In the subcategory of Timer or RTC, the RTCs can be found.A total of 8B of memory is available for storing data and programs on the real time analog clocks.Mounting type is Surface Mount.A total of 2.5/5V power supplies are required to operate it.There are 8 pins on it.You can achieve 32.768kHz frequency.Currently, it has 1 outputs configured. M41T0M6F Features8-SOIC (0.154, 3.90mm Width) package 8 terminations 8 pin count 2.5/5V power supplies 1 outputs M41T0M6F ApplicationsThere are a lot of STMicroelectronics M41T0M6F Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | PCA8565TS/1,118 OverviewThere is an embedded version of real time clocks in the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).Tape & Reel (TR) is the way time clock is packaged, which is the way time clock is intended to be.A voltage of 1.8V~5.5V is supplied to this electrical RTC.This electrical real time clock belongs to the Clock/Calendar category.As you can see from the diagram, this electronic component is mounted in the way of Surface Mount.Ideally, the operating temperature should be -40°C~125°C.When operating as part of a process, electronic time clocks are possible to ensure that Alarm, Leap Year, Square Wave Output, Watchdog Timer are maintained at all times.In the case of 8 terminations, transmission lines have the characteristic impedance of the terminating RTC module.Its supply voltage is 2V.With its 8 pins, it has the necessary functions.In the family PCA8565, RTCs are a member.A maximum output frequency of 0.032MHz should be maintained by the real time analog clock.There are 1 timers, which are control real time clocks that output a signal at a preset time after an input signal is received. PCA8565TS/1,118 Features8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package 8 terminations 8 pin count PCA8565TS/1,118 ApplicationsThere are a lot of NXP USA Inc. PCA8565TS/1,118 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | BQ32002DR OverviewReal time clocks is embedded in the 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) is the way in which time clock is packaged.There is a voltage of 3V~3.6V when powering this electrical RTC.There is a type Clock/Calendar for this electrical real time clock.As you can see from the diagram, this electronic component is mounted in the way of Surface Mount.There should be -40°C~85°C operating temperature.Electronic time clocks are possible to make sure that Leap Year, Square Wave Output, Trickle-Charger are maintained when operating.There are 8 terminations for transmission lines, which means that the RTC module that terminates the line matches its characteristic impedance.RTC real time clocks such as this one are powered by 3.3V voltage.It has a total of 8 pins on it.As far as the family are concerned, RTCs are part of BQ32002.This electrical digital time clock is powered by a voltage that is 1.4V~3.6V at the time of installation.Neither real time clocks' output frequency nor real time clocks' response frequency should exceed 0.032MHz.Mounting type for the RTC module is Surface Mount.8 pins are attached to it.Optimal efficiency requires a supply voltage of 3.3V. BQ32002DR Features8-SOIC (0.154, 3.90mm Width) package 8 terminations 8 pin count Be maintained at 3.3V for high efficiency. BQ32002DR ApplicationsThere are a lot of Texas Instruments BQ32002DR Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | M41T82RM6F OverviewYou can find real time clocks in package 8-SOIC (0.154, 3.90mm Width) among the other packages that are available.The package is Tape & Reel (TR).2.7V~5.5V is the supply voltage of this electrical RTC.This electrical real time clock is type Clock/Calendar.As you can see from the diagram, this electronic component is mounted in the way of Surface Mount.-40°C~85°C is the operating temperature.Operating with Alarm, Leap Year, SRAM, Watchdog Timer are possible.Transmitter lines with 8 terminations exhibit the characteristic impedance of the terminating RTC module.RTC real time clocks such as this one are powered by 3V voltage.The RTCs are equipped with the necessary features due to its 8 pins.RTCs are a member of the family M41T82.This electrical digital time clock has a supply voltage of 2V~5.5V.A part like this is included in Timers or RTCs.It should be noted that the RTC times embed a memory of 7B which is usable for storing programs and data as well.A frequency of 0.4MHz should not be exceeded by real time clocks' output frequency.A mounting type of Surface Mount has been specified for this RTC module.As a power supply for the real time clock, a value of 3/5V is used.The real time clock is equipped with 8 pins.Following an input signal, there are 1 timers that output a signal at a preset time.Digital time clocks with 8 bits are designed for this application. M41T82RM6F Features8-SOIC (0.154, 3.90mm Width) package 8 terminations 8 pin count 3/5V power supplies 8 Bits M41T82RM6F ApplicationsThere are a lot of STMicroelectronics M41T82RM6F Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP79410-I/ST OverviewThere is an embedded version of real time clocks in the package 8-TSSOP (0.173, 4.40mm Width).Time clock is packaged in the manner of Tube.Its supply voltage is 1.8V~5.5V.The type of this electrical real time clock is Clock/Calendar.On the system board, this real time clock (RTC) is mounted in Surface Mount.The operating temperature should be -40°C~85°C.Operating with Alarm, Leap Year, Square Wave Output, SRAM, Unique ID are possible.Transmitter lines with 8 terminations exhibit the characteristic impedance of the terminating RTC module.In the case of this RTC real time clock, there is 5V voltage supplied to it.Due to its 8 pins, it has the necessary features.MCP79410 are RTC s family.In this electrical digital time clock, the supply voltage is 1.3V~5.5V.Timers or RTCs includes this part.In these RTC times, there is a memory of 64B 1Kb where data and programs can be stored.Real time clocks' output frequency should not exceed 0.4MHz.Mounting type Surface Mount matches the RTC module.The power supply is 2/5V.8 pins are attached to it. MCP79410-I/ST Features8-TSSOP (0.173, 4.40mm Width) package 8 terminations 8 pin count 2/5V power supplies MCP79410-I/ST ApplicationsThere are a lot of Microchip Technology MCP79410-I/ST Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP79402-I/SN OverviewAmong the packages 8-SOIC (0.154, 3.90mm Width) is where real time clocks can be found.As a result, time clock is packaged in the same way as Tube.In this electrical RTC, the supply voltage is 1.8V~5.5V.An electrical real time clock of this type is called a Clock/Calendar.Surface Mount is the way this real time clock (RTC) is mounted on the system board.Electronic time clocks should be -40°C~85°C degrees Celsius during operation.When a command are executed, electronic time clocks are possible to maintain Alarm, Leap Year, Square Wave Output, SRAM, Unique ID in order to maintain the current state.Transmitter lines with 8 terminations exhibit the characteristic impedance of the terminating RTC module.Obviously, a voltage of 2.5V is being supplied to this electronic component.With 8 pins, it is equipped.There are only one family in which RTCs belongs, and that are MCP79402.Keeping in mind that the supply voltage of this electrical digital time clock is 1.3V~5.5V is important.It falls under the subcategory of Timer or RTC.A total of 64B of memory is available for storing data and programs on the real time analog clocks.A frequency above 0.4MHz should not be used for real time clocks' output.The mounting type of the RTC module is Surface Mount.A total of 2/5V power supplies are required to operate it.8 pins are present on it.Following an input signal, there are 1 timers that output a signal at a preset time. MCP79402-I/SN Features8-SOIC (0.154, 3.90mm Width) package 8 terminations 8 pin count 2/5V power supplies MCP79402-I/SN ApplicationsThere are a lot of Microchip Technology MCP79402-I/SN Real Time Clocks applications.
|
6651
In-stock
|
Get Quote | |||
| NXP Semiconductors | PCF8563T/F4,118 OverviewThere is a version of real time clocks in the package 8-SOIC (0.154, 3.90mm Width).Tape & Reel (TR) is the way time clock is packaged, which is the way time clock is intended to be.In this electrical RTC, the supply voltage is 1.8V~5.5V.Electrical real time clocks of type Clock/Calendar correspond to this real time clock.The position of this real time clock (RTC) on the system board is indicated by Surface Mount.Ideally, the operating temperature should be set to -40°C~85°C.When operating as part of a process, electronic time clocks are possible to ensure that Alarm, Leap Year, Watchdog Timer are maintained at all times.It is possible to terminate a transmission line with a RTC module that matches the characteristic impedance of the line, which is known as 8 termination.It is possible to see 2V voltage being supplied to this RTC real time clock.It is equipped with the necessary features since it has 8 pins.RTCs belongs to PCF8563 family.The content of Timer or RTC includes this component.A maximum output frequency of 0.032MHz should be maintained by the real time analog clock.In order for it to be powered, it requires a power supply of 2/5V. PCF8563T/F4,118 Features8-SOIC (0.154, 3.90mm Width) package 8 terminations 8 pin count 2/5V power supplies PCF8563T/F4,118 ApplicationsThere are a lot of NXP USA Inc. PCF8563T/F4,118 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | DP8573AV/NOPB OverviewThis real time analog clock can be found in package 28-LCC (J-Lead).As you can see, time clock is packaged as if time clock were in the form of Tube.As far as the supply voltage for this electrical RTC is concerned, it is 4.5V~5.5V.The type of this electrical real time clock is Clock/Calendar.Surface Mount is the way this real time clock (RTC) is mounted.-40°C~85°C should be the operating temperature.When a command are executed, electronic time clocks are possible to maintain Alarm, Leap Year in order to maintain the current state.In 28 terminations, a transmission line is terminated with an impedance-matched RTC module.In the case of this RTC real time clock, there is 5V voltage supplied to it.With its 28 pins, it has the necessary functions.The DP8573 family contains RTCs .As far as the supply voltage for this electrical digital time clock is concerned, it is 2.2V~5.1V.There are such RTCs in Timer or RTC subcategory.Mounting type Surface Mount matches the RTC module.A total of 28 pins are equipped with the real time clock.RTC time is essential that the supply voltage remain at 5V for maximum efficiency.There are also PRESCALED XTAL OSCILLATOR OUTPUT FOR RTC; POWER FAIL I/P FOR BUS LOCK-OUT characteristics.There are 8 outputs configured on it. DP8573AV/NOPB Features28-LCC (J-Lead) package 28 terminations 28 pin count Be maintained at 5V for high efficiency. 8 outputs DP8573AV/NOPB ApplicationsThere are a lot of Texas Instruments DP8573AV/NOPB Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | PCF85263ATT1/AJ OverviewThere is an embedded version of real time clocks in the package 10-TFSOP, 10-MSOP (0.118, 3.00mm Width).As you can see, time clock is packaged as if time clock were in the form of Tape & Reel (TR).The supply voltage of this electrical RTC is 0.9V~5.5V.This electrical real time clock is type Clock/Calendar.This part is mounted on the systemboard in the way indicated by Surface Mount.There should be -40°C~85°C operating temperature.When operating, electronic time clocks are possible to make sure that Alarm, Leap Year, Watchdog Timer remains constant in the process.Transmitter lines with 10 terminations exhibit the characteristic impedance of the terminating RTC module.This RTC real time clock has a voltage supply of 3.3V which is provided to it.The RTCs are equipped with the necessary features due to its 10 pins.This electrical digital time clock has a supply voltage of 0.9V~5.5V.1 timers are in the real time clock that outputs a signal in response to an input signal. PCF85263ATT1/AJ Features10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package 10 terminations 10 pin count PCF85263ATT1/AJ ApplicationsThere are a lot of NXP USA Inc. PCF85263ATT1/AJ Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | PCF85363ATT/AJ OverviewThere is a package called 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) which contains real time clocks, and you can find real time clocks there.As a result, time clock is packaged in the same way as Tape & Reel (TR).0.9V~5.5V is the supply voltage of this electrical RTC.Clock/Calendar is the type of electrical real time clock that is being used.real time clock (RTC)s like this are mounted in the way of Surface Mount.The operating temperature should be -40°C~85°C.Operating with Alarm, Leap Year, Watchdog Timer are possible.Transmitter lines with 8 terminations exhibit the characteristic impedance of the terminating RTC module.In the case of this RTC real time clock, there is 3.3V voltage supplied to it.The RTCs are equipped with the necessary features due to its 8 pins.A voltage of 0.9V~5.5V is supplied to this electrical digital time clock.There is a memory size of 64B available for storing data and programs on the real time analog clocks.Upon receiving an input signal, 1 timers output a signal at a preset time. PCF85363ATT/AJ Features8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package 8 terminations 8 pin count PCF85363ATT/AJ ApplicationsThere are a lot of NXP USA Inc. PCF85363ATT/AJ Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | PCA85063ATT/AJ OverviewThere is an embedded version in the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).There is a way to package time clock in the form of a Tape & Reel (TR).It is important to keep in mind that the supply voltage of this electrical RTC is 0.9V~5.5V.There is a type Clock/Calendar for this electrical real time clock.This real time clock (RTC) is mounted in the way of Surface Mount.The temperature should always be kept at -40°C~105°C to ensure safe operation.When operating as part of a process, electronic time clocks are possible to ensure that Alarm, Leap Year, Square Wave Output are maintained at all times.When a transmission line is terminated with 8 terminations, it means that the RTC module that terminates the line matches its characteristic impedance.It is possible to see 3.3V voltage being supplied to this RTC real time clock.The reason for this is that, due to the fact that it has 8 pins, it has the necessary features.An input signal is received by 1 timers, which output a signal after a preset time.It is a type of real time clock belonging to the Automotive, AEC-Q100 series. PCA85063ATT/AJ Features8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package 8 terminations 8 pin count Automotive, AEC-Q100 series PCA85063ATT/AJ ApplicationsThere are a lot of NXP USA Inc. PCA85063ATT/AJ Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP795W10-I/SL OverviewAmong the packages 14-SOIC (0.154, 3.90mm Width) is where real time clocks can be found.As you can see, time clock is packaged as if time clock were in the form of Tube.This electrical RTC is powered by 1.8V~3.6V voltage.It is a Clock/Calendar type electrical real time clock.As you can see from the diagram, this electronic component is mounted in the way of Surface Mount.Ideally, the operating temperature should be set to -40°C~85°C.Operating with Alarm, EEPROM, Leap Year, Square Wave Output, SRAM, Watchdog Timer are possible.There is the possibility of terminating transmission lines with 14 terminations, which means that the equipment used to terminate the line will match its characteristic impedance.5V voltage is present on this electronic component.It is equipped with the necessary features since it has 14 pins.The family to which RTCs belongs are MCP795W10.It is important to keep in mind that the supply voltage of this electrical digital time clock is 1.3V~3.6V.It is included as part of Timer or RTC.A total of 64B of memory is available for storing data and programs on the real time analog clocks.The frequency of real time clocks' output should not exceed 10MHz.Amounting type Surface Mount is the one associated with the RTC module.There are 2/5V power supplies attached to it.There are 14 pins, which are pronged contacts as part of a signal interface in a computer or other communications real time clock. Additionally, it has ALSO OPEARTES AT 1.8 V MINIMUM SUPPLY AT 3 MHZ.It is designed with 8 bits. MCP795W10-I/SL Features14-SOIC (0.154, 3.90mm Width) package 14 terminations 14 pin count 2/5V power supplies 8 Bits MCP795W10-I/SL ApplicationsThere are a lot of Microchip Technology MCP795W10-I/SL Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP795W10-I/ST OverviewThere is an embedded version of real time clocks in the package 14-TSSOP (0.173, 4.40mm Width).Tube is the way in which time clock is packaged.1.8V~3.6V is the supply voltage of this electrical RTC.An electrical real time clock of type Clock/Calendar can be said to be this one.This real time clock (RTC) is mounted in the way of Surface Mount.Temperatures should be kept at -40°C~85°C at all times for safe operation.Electronic time clocks are possible to make sure that Alarm, EEPROM, Leap Year, Square Wave Output, SRAM, Watchdog Timer are maintained when operating.With 14 terminations, transmission lines have the characteristic impedance of the RTC module terminating them.RTC real time clocks like this have a 5V supply voltage.A total of 14 pins can be found on it.Thare RTCs em are part of the family MCP795W10.A voltage of 1.3V~3.6V is supplied to this electrical digital time clock.In the subcategory of Timer or RTC, the RTCs can be found.A memory of 64B can be used to store data and programs.A frequency of 10MHz should not be exceeded by real time clocks' output.The RTC module is mounted with mounting type Surface Mount.There is a power supply of 2/5V used to power the real time clock.It is equipped with 14 pins.ALSO OPEARTES AT 1.8 V MINIMUM SUPPLY AT 3 MHZ are also characteristics of it.8 Bits make up this digital time clock. MCP795W10-I/ST Features14-TSSOP (0.173, 4.40mm Width) package 14 terminations 14 pin count 2/5V power supplies 8 Bits MCP795W10-I/ST ApplicationsThere are a lot of Microchip Technology MCP795W10-I/ST Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | M41T93ZMY6F OverviewThere is a package called 18-SOX, 18-SOIC with Crystal (7.5mm Width) which contains real time clocks, and you can find real time clocks there.As a result, time clock is packaged in the same way as Tape & Reel (TR).This electrical RTC is powered by a voltage that is 2.38V~5.5V at the time of installation.It can be said that this electrical real time clock belongs to the Clock/Calendar type.The way this real time clock (RTC) is mounted on the system board is Surface Mount.-40°C~85°C should be the operating temperature.When operating, electronic time clocks would be possible to ensure that the value Alarm, Leap Year, Square Wave Output, SRAM, Watchdog Timer are maintained.There is the possibility of terminating transmission lines with 18 terminations, which means that the equipment used to terminate the line will match its characteristic impedance.This RTC real time clock is supplied with 3V voltage.There are 18 pins on it.The family in which RTCs belongs are M41T93.1.8V~5.5V is the supply voltage of this electrical digital time clock.Under the Timers or RTCs subcategory, the RTCs belongs.A maximum output frequency of 10MHz should be maintained by the real time analog clock.This RTC module has a mounting type of Surface Mount.There are 2.4/5.5V power supplies attached to it.A total of 18 pins are equipped with the real time clock.An input signal is received by 1 timers, which output a signal after a preset time.There are 8 bits in this digital time clock. M41T93ZMY6F Features18-SOX, 18-SOIC with Crystal (7.5mm Width) package 18 terminations 18 pin count 2.4/5.5V power supplies 8 Bits M41T93ZMY6F ApplicationsThere are a lot of STMicroelectronics M41T93ZMY6F Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | PCF8563BS/4,118 OverviewIn the 10-VFDFN Exposed Pad package, real time clocks is embedded as a dependency.Basically, time clock is packaged in a way that is equivalent to Tape & Reel (TR).This electrical RTC is powered by 1.8V~5.5V voltage.Electrical real time clocks of type Clock/Calendar correspond to this real time clock.This real time clock (RTC) is mounted in the way of Surface Mount.There should be a temperature of -40°C~85°C during the operation.When operating, electronic time clocks are possible to ensure that Alarm, Leap Year, Watchdog Timer are maintained.There is the possibility of terminating transmission lines with 10 terminations, which means that the equipment used to terminate the line will match its characteristic impedance.This RTC real time clock is powered by 2V volts.The RTCs are equipped with the necessary features due to its 10 pins.The family in which RTCs belongs are PCF8563.There are such RTCs in Timer or RTC subcategory.There should be no more than 0.032MHz frequency in real time clocks' output.The power supply is 2/5V.1 timer real time clocks send out a signal at a preset time based on input signals. PCF8563BS/4,118 Features10-VFDFN Exposed Pad package 10 terminations 10 pin count 2/5V power supplies PCF8563BS/4,118 ApplicationsThere are a lot of NXP USA Inc. PCF8563BS/4,118 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP795W12-I/SL OverviewYou can find real time clocks in package 14-SOIC (0.154, 3.90mm Width) among the other packages that are available.A Tube package is used to package time clock.As far as the supply voltage for this electrical RTC is concerned, it is 1.8V~3.6V.It is a Clock/Calendar type electrical real time clock.As you can see from the diagram, this electronic component is mounted in the way of Surface Mount.A temperature of -40°C~85°C should be used for operation.Operating with Alarm, EEPROM, Leap Year, Square Wave Output, SRAM, Unique ID, Watchdog Timer are possible.It is possible to terminate transmission lines with 14 terminations, which means that the RTC module terminating the line matches its characteristic impedance.This RTC real time clock's supply voltage is 5V.A total of 14 pins are attached to this RTCs.MCP795W12 are a family of objects that belongs to RTCs .A voltage of 1.3V~3.6V is required for the supply of this electrical digital time clock.It falls under the subcategory of Timer or RTC.The RTC times have a memory size of 64B that is available for storing data and programs.Real time clocks' output frequency should not exceed 10MHz.This RTC module is mounted using type Surface Mount.For the purpose of powering the real time clock, the power supply is set to 2/5V.It is equipped with 14 pins.ALSO OPEARTES AT 1.8 V MINIMUM SUPPLY AT 3 MHZ are other characteristics of it.This digital time clock is designed with 8 Bits. MCP795W12-I/SL Features14-SOIC (0.154, 3.90mm Width) package 14 terminations 14 pin count 2/5V power supplies 8 Bits MCP795W12-I/SL ApplicationsThere are a lot of Microchip Technology MCP795W12-I/SL Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | M41T83SMY6F Overviewreal time clocks is located in package 18-SOX, 18-SOIC with Crystal (7.5mm Width).Time clock is packaged in the manner of Tape & Reel (TR).3V~5.5V is the supply voltage of this electrical RTC.This electrical real time clock belongs to the Clock/Calendar category.Surface Mount is the way to mount this real time clock (RTC).The operating temperature should be -40°C~85°C.When operating, Alarm, Leap Year, Square Wave Output, SRAM, Watchdog Timer can be ensured.Transmission lines can be terminated with 18 terminations, which means that the RTC module that terminates the line matches its characteristic impedance.This RTC real time clock is supplied with 5V voltage.A total of 18 pins can be found on it.As far as the family are concerned, RTCs are part of M41T83.This electrical digital time clock has a 2V~5.5V supply voltage.Timers or RTCs includes this component in its content.Real time clocks' output frequency should not exceed 0.4MHz.Mounting type Surface Mount is chosen for the RTC module.As a power supply for the real time clock, a value of 3.3/5V is used.With 18 pins, it is equipped.In this system, there are 1 timers, which are real time clocks that output a signal at a preset time after an input signal is received.With 8 Bits, this digital time clock is designed. M41T83SMY6F Features18-SOX, 18-SOIC with Crystal (7.5mm Width) package 18 terminations 18 pin count 3.3/5V power supplies 8 Bits M41T83SMY6F ApplicationsThere are a lot of STMicroelectronics M41T83SMY6F Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP7940NT-E/MS OverviewReal time clocks is embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.In this case, time clock is packaged in the way of Tape & Reel (TR).In this electrical RTC, the supply voltage is 1.8V~5.5V.It is a Clock/Calendar type electrical real time clock.This electronic component has been mounted in the way of Surface Mount.-40°C~125°C should be the operating temperature.When operating, electronic time clocks are possible to ensure that Alarm, Leap Year, Square Wave Output, SRAM are maintained.With 8 terminations, transmission lines have the characteristic impedance of the RTC module terminating them.This RTC real time clock has a voltage supply of 2.5V which is provided to it.This object belongs to the family MCP7940N.Note that the supply voltage is 1.3V~5.5V for this electrical digital time clock.Timer or RTC is the subcategory in which the RTCs belongs.A memory of 64B can be used to store data and programs.A power supply of 2/5V is used to power it.With 8 pins, it is equipped.In this system, there are 1 timers, which are real time clocks that output a signal at a preset time after an input signal is received.It is a type of real time clock belonging to the Automotive, AEC-Q100 series. MCP7940NT-E/MS Features8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package 8 terminations 2/5V power supplies Automotive, AEC-Q100 series MCP7940NT-E/MS ApplicationsThere are a lot of Microchip Technology MCP7940NT-E/MS Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Texas Instruments | BQ3285S-SB2 OverviewThis real time analog clock can be found in package 24-SOIC (0.295, 7.50mm Width).In this case, time clock is packaged in the way of Tube.As far as the supply voltage for this electrical RTC is concerned, it is 4.5V~5.5V.Electrical real time clocks of type Clock/Calendar correspond to this real time clock.In this case, Surface Mount is the way this part is mounted on the systemboard.Temperatures should be kept at 0°C~70°C at all times for safe operation.Electronic time clocks are possible to make sure that Alarm, Daylight Savings, Leap Year, NVSRAM, Square Wave Output are maintained when operating.24 terminations result in transmission lines having the characteristic impedance of a RTC module terminating them.This RTC real time clock's supply voltage is 5V.With 24 pins, it is equipped.As far as the family are concerned, RTCs are part of BQ3285.A voltage of 2.5V~4V is required for the supply of this electrical digital time clock.In Timer or RTC, you can find this component.There is a memory size of 114B available for storing data and programs on the real time analog clocks.A frequency of 0.032MHz should not be exceeded by real time clocks' output frequency.It is mounted in the way of Surface Mount.There is a power supply of 5V used to power the real time clock.There are 24 pins on it.An input signal is received by 1 timers, which output a signal after a preset time.High efficiency requires a 5V supply voltage. BQ3285S-SB2 Features24-SOIC (0.295, 7.50mm Width) package 24 terminations 24 pin count 5V power supplies Be maintained at 5V for high efficiency. BQ3285S-SB2 ApplicationsThere are a lot of Texas Instruments BQ3285S-SB2 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | M41T81SMY6F OverviewYou can find real time clocks in package 18-SOX, 18-SOIC with Crystal (7.5mm Width) among the other packages that are available.As of Tape & Reel (TR), time clock is packaged in this way.The supply voltage of this electrical RTC is 2.7V~5.5V.Electrical real time clock type Clock/Calendar.On the system board, this real time clock (RTC) is mounted in Surface Mount.-40°C~85°C is the operating temperature.When operating, electronic time clocks would be possible to ensure that the value Alarm, Leap Year, Square Wave Output, Watchdog Timer are maintained.A transmission line with 18 terminations possesses the characteristic impedance of the RTC module terminating it.It should be noted that this RTC real time clock is being supplied with 5V voltage at the moment.There are 18 pins on it.As far as the family are concerned, RTCs are part of M41T81.Keeping in mind that the supply voltage of this electrical digital time clock is 2V~3.5V is important.In the subcategory of Timers or RTCs, the RTCs can be found.There should be no more than a 0.032MHz frequency at real time clocks' output.It appears that the RTC module's mounting type is Surface Mount.There are 3/5V power supplies attached to it.The real time clock is equipped with 18 pins.There are 1 timers, which are control real time clocks that output a signal at a preset time after an input signal is received. M41T81SMY6F Features18-SOX, 18-SOIC with Crystal (7.5mm Width) package 18 terminations 18 pin count 3/5V power supplies M41T81SMY6F ApplicationsThere are a lot of STMicroelectronics M41T81SMY6F Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP7940NT-E/SNVAO Overview8-SOIC (0.154, 3.90mm Width) contains real time clocks.Tape & Reel (TR) is the way in which time clock is packaged.Providing this electrical RTC with a voltage of 1.8V~5.5V is required.The electrical real time clock belongs to the type Clock/Calendar.real time clock (RTC)s like this are mounted in the way of Surface Mount.Electronic time clocks should be -40°C~125°C degrees Celsius during operation.When operating, electronic time clocks are possible to ensure that Alarm, Leap Year, Square Wave Output, SRAM are maintained.Transmission lines with 8 terminations have the characteristic impedance of the RTC module terminating them.The supply voltage of this RTC real time clock is 2.5V.There is 1.3V~5.5V supply voltage for this electrical digital time clock.Programs and data can be stored in the 64B memory embedded in the RTC times.1 timers are used in this system. They output a signal after an input signal is received at a predetermined time.The Automotive, AEC-Q100 series comprises this type of real time clock. MCP7940NT-E/SNVAO Features8-SOIC (0.154, 3.90mm Width) package 8 terminations Automotive, AEC-Q100 series MCP7940NT-E/SNVAO ApplicationsThere are a lot of Microchip Technology MCP7940NT-E/SNVAO Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | PCF8593T/1,112 OverviewThere is a package called 8-SOIC (0.154, 3.90mm Width) which contains real time clocks, and you can find real time clocks there.As of Tube, time clock is packaged in this way.Its supply voltage is 2.5V~6V.It can be said that this electrical real time clock belongs to the Clock/Calendar type.Here, Surface Mount represents how this part is mounted.The operating temperature should be -40°C~85°C.When a command are executed, electronic time clocks are possible to maintain Alarm, NVSRAM in order to maintain the current state.There is the possibility of terminating transmission lines with 8 terminations, which means that the equipment used to terminate the line will match its characteristic impedance.3V is the supply voltage of this RTC real time clock.There are 8 pins on it.RTCs belongs to PCF8593 family.It is included as part of Timer or RTC.For the purpose of storing data and programs, the RTC times are embedded with a storage capacity of 8B.A maximum output frequency of 0.032MHz should be maintained by the real time analog clock.The power supply is 3/5V. PCF8593T/1,112 Features8-SOIC (0.154, 3.90mm Width) package 8 terminations 8 pin count 3/5V power supplies PCF8593T/1,112 ApplicationsThere are a lot of NXP USA Inc. PCF8593T/1,112 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | PCA8802CX8/B/1,027 OverviewThere is an embedded version in the package Die.A Tape & Reel (TR) package is used to package time clock.The supply voltage of this electrical RTC is 1.6V~5.5V.It is a Binary Counter type electrical real time clock.-40°C~85°C is the operating temperature.In order to ensure Square Wave Output, Unique ID when operating, a certain value has to be set.With 8 terminations, transmission lines have the characteristic impedance of the RTC module terminating them.RTC real time clocks like this have a 3V supply voltage.The PCA8802 family contains RTCs .It reaches 5.5V when the maximal supply voltage (Vsup) is reached.Normal operation requires a supply voltage (Vsup) greater than 1.6V.SEATED HGT_NOM; TERM PITCH-MAX are also characteristics of it. PCA8802CX8/B/1,027 FeaturesDie package 8 terminations PCA8802CX8/B/1,027 ApplicationsThere are a lot of NXP USA Inc. PCA8802CX8/B/1,027 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | PCA8802U/2AA/1,026 OverviewIn package Die, real time clocks is located.Packaged as Tray.To supply this electrical RTC, a voltage of 1.6V~5.5V is required.There is a type of electrical real time clock Binary Counter associated with this real time clock.Maintaining a constant temperature of -40°C~85°C is essential for safe operation.Operating with Square Wave Output, Unique ID are possible.Transmission lines with 8 terminations have the characteristic impedance of their termination RTC modules.3V voltage is present on this electronic component.As a member of the PCA8802 family, RTCs belongs to them.5.5V is the maximum supply voltage (Vsup).In order to maintain normal operation, the supply voltage (Vsup) must be kept above 1.6V.Additionally, it has SEATED HGT_NOM; TERM PITCH-MAX. PCA8802U/2AA/1,026 FeaturesDie package 8 terminations PCA8802U/2AA/1,026 ApplicationsThere are a lot of NXP USA Inc. PCA8802U/2AA/1,026 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| NXP Semiconductors | PCF8564ACX9/1,005 OverviewIn package Die, real time clocks is located.As of Bulk, time clock is packaged in this way.As far as the supply voltage for this electrical RTC is concerned, it is 1V~5.5V.Electrical real time clocks of type Clock/Calendar are involved.The real time clock (RTC) that is mounted in the way of Surface Mount is connected to this circuit board.Ideally, the operating temperature should be -40°C~85°C.When operating, you can ensure Alarm, Leap Year, Square Wave Output, Watchdog Timer.In the family PCF8564, RTCs are a member. PCF8564ACX9/1,005 FeaturesDie package PCF8564ACX9/1,005 ApplicationsThere are a lot of NXP USA Inc. PCF8564ACX9/1,005 Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| STMicroelectronics | M41T01M6F OverviewIn the 8-SOIC (0.154, 3.90mm Width) package, real time clocks is embedded.Packaged as Cut Tape (CT).It requires a voltage of 2V~5.5V to be supplied.The electrical real time clock belongs to the type Clock/Calendar.Surface Mount is the way this real time clock (RTC) is mounted on the system board.A temperature of -40°C~85°C should be used for operation.When running a program, electronic time clocks may be possible to ensure that Leap Year are maintained at all times.Transmission lines can be terminated with 8 terminations, which means that the RTC module that terminates the line matches its characteristic impedance.M41T01 is the family name of this object.There is a voltage of 2.5V~3.5V when powering this electrical digital time clock.It is mounted in the way of Surface Mount.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications real time clock. M41T01M6F Features8-SOIC (0.154, 3.90mm Width) package 8 terminations M41T01M6F ApplicationsThere are a lot of STMicroelectronics M41T01M6F Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP7940MT-I/ST OverviewThere is an embedded version in the package 8-TSSOP (0.173, 4.40mm Width).As a result, time clock is packaged in the same way as Tape & Reel (TR).A voltage of 1.8V~5.5V is supplied to this electrical RTC.In this case, we are dealing with an electrical real time clock that has a type of Clock/Calendar.This part is mounted on the systemboard in the way indicated by Surface Mount.In order to be safe, electronic time clocks are imperative that the temperature are kept at -40°C~85°C at all times.When operating, electronic time clocks are possible to make sure that Alarm, Leap Year, Square Wave Output, SRAM remains constant in the process.8 terminations are available for transmission lines, implying that the RTC module terminating the line matches its characteristic impedance.Obviously, a voltage of 2.5V is being supplied to this electronic component.This object belongs to the family MCP7940M.Timer or RTC includes this component in its content.Programs and data can be stored in the 64B memory embedded in the RTC times.The mounting type of the RTC module is Surface Mount.There are 2/5V power supplies attached to it.With 8 pins, it is equipped.Following an input signal, there are 1 timers that output a signal at a preset time. MCP7940MT-I/ST Features8-TSSOP (0.173, 4.40mm Width) package 8 terminations 2/5V power supplies MCP7940MT-I/ST ApplicationsThere are a lot of Microchip Technology MCP7940MT-I/ST Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP795W22-I/ST OverviewIn the package 14-TSSOP (0.173, 4.40mm Width), you will find real time clocks, and you will be able to install real time clocks.Tube is the way in which time clock is packaged.Providing this electrical RTC with a voltage of 1.8V~3.6V is required.An electrical real time clock of type Clock/Calendar can be said to be this one.The way this real time clock (RTC) is mounted on the system board is Surface Mount.Maintaining a constant temperature of -40°C~85°C is essential for safe operation.Electronic time clocks are possible to make sure that Alarm, EEPROM, Leap Year, Square Wave Output, SRAM, Unique ID, Watchdog Timer are maintained when operating.When transmission lines are terminated with a zero, their characteristic impedance is that of the terminating RTC module.There is 5V voltage supplied to this RTC real time clock.There are 14 pins on it.MCP795W22 is the family name of this object.The supply voltage of this electrical digital time clock is 1.3V~3.6V.In Timer or RTC, you can find this component.Programs and data can be stored in the 64B memory embedded in the RTC times.A maximum output frequency of 10MHz should be maintained by the real time analog clock.Mounting type Surface Mount matches the RTC module.In order for it to be powered, it requires a power supply of 2/5V.The real time clock is equipped with 14 pins.Additionally, it has ALSO OPEARTES AT 1.8 V MINIMUM SUPPLY AT 3 MHZ.Digital time clocks with 8 bits are designed for this application. MCP795W22-I/ST Features14-TSSOP (0.173, 4.40mm Width) package 14 terminations 14 pin count 2/5V power supplies 8 Bits MCP795W22-I/ST ApplicationsThere are a lot of Microchip Technology MCP795W22-I/ST Real Time Clocks applications.
|
999
In-stock
|
Get Quote | |||
| Microchip Technology | MCP7940NT-I/MS OverviewReal time clocks is embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.Tape & Reel (TR) is the way time clock is packaged, which is the way time clock is intended to be.There is 1.8V~5.5V voltage supply for this electrical RTC.An electrical real time clock of type Clock/Calendar can be said to be this one.On the system board, this real time clock (RTC) is mounted in Surface Mount.Electronic time clocks should be -40°C~85°C degrees Celsius during operation.If Alarm, Leap Year, Square Wave Output, SRAM is ensured when operating, then the operation will be successful.8 terminations are available for transmission lines, implying that the RTC module terminating the line matches its characteristic impedance.In this case, the voltage supplied to the electronic component is 2.5V.With 8 pins, it is equipped.This object belongs to the family MCP7940N.The voltage supply of this electrical digital time clock is 1.3V~5.5V.A component such as this is included in the contents of Timer or RTC.The RTC times embed a memory of 64B available for storing programs and data.There should be no more than 0.032MHz frequency in real time clocks' output.There is a type of mounting for this RTC module: Surface Mount.As a power supply for the real time clock, a value of 2/5V is used.8 pins are attached to it.It is a type of real time clock belonging to the Automotive, AEC-Q100 series. MCP7940NT-I/MS Features8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package 8 terminations 8 pin count 2/5V power supplies Automotive, AEC-Q100 series MCP7940NT-I/MS ApplicationsThere are a lot of Microchip Technology MCP7940NT-I/MS Real Time Clocks applications.
|
999
In-stock
|
Get Quote |
Please send RFQ , we will respond immediately.
